• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.77-80
• /
• 2012

화재 시에는 발생 유독가스와 연기로 인하여 많은 인명 피해가 날 수 있으며, 따라서 주요 건물이나 시설에는 국민의 생명을 보호하기 위한 화재용 긴급대피마스크를 갖추도록 권고하고 있다. 하지만 그 성능에 대한 의혹이 꾸준히 제기되고 있어, 사용자인 국민으로서는 늘 불안한 심정이다. 이에 본 연구에서는 현재 국내 시판되고 있는 화재용 긴급대피마스크 5종에 대하여 KS 주요 시험항목에 의거하여 성능시험을 실시하고, 문제점을 진단하였다. 실험 결과, 일부 제품에서는 성능기준에 미치지 못하는 경우가 발생하였으며, 이는 화재 시 국민의 안전을 크게 위협하는 중차대한 사안이므로, 시급히 부적격 제품의 판매를 제한하고 성능기준에 맞는 제품만이 판매될 수 있도록 법적인 보완이 이루어져야 하는 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.131-131
• /
• 2009

최근 환경규제가 강화되면서 친환경적인 전력생산 요구 등의 외부환경 변화에 따른 우리나라의 전력구조가 기존의 중압 집중형 발전을 탈피한 분산전원 발전에 대한 관심이 증대되고 있는 실정이다. 특히, 분산전원으로서의 전력생산은 공급의 안전성, 경쟁력 및 에너지의 지속성 등이 요구되어지는데, 재생에너지가 가지고 있는 에너지 지속성의 한계 및 설치의 제약성을 탈피할 수 있는 시스템으로 현재 연료전지시스템이 가장 근접해 있는 실정이다. 즉, 도시가스 인프라가 우수하고 인구조밀 지역이 많은 우리나라의 특성상 각 가정 및 건물에 쉽게 설치하고 공급의 안전성을 갖는 건물용 연료전지는 최근 가장 각광받고 있는 분산전원 시스템 중의 하나이다. 올해부터 모니터링사업의 일환으로 수용가에 설치 될 연료전지 시스템이 얼마나 안정적으로 전기와 열을 각 가정에 공급하고 시스템의 안전성을 확보하는 가는 건물용 연료전지의 분산전원으로서의 가능성 및 국민의 수용성을 증대시키는 중요한 역할을 할 것이다. 연료전지시스템은 상용전력과 연계되어 있기 때문에 시스템의 안정성 뿐만 아니라 상용전력의 변화에 대응하여 안정적인 운전을 하는지에 대한 평가가 필수적이다. 이에 따라 본 연구에서는 가정용 연료전지시스템의 성능 및 안전성평가의 일환으로 계통연계형 전력변환장치의 성능 및 안전성을 평가 하고자 한다. 연료전지 검사를 위한 계통연계형 전력변환장치의 시험평가 항목으로는 크게 정상특성성능시험, 보호기능성능시험, 과도응답특성성능시험 및 외부사고성능시험 등으로 나뉘어진다. 본 연구에서는 외부사고 성능시험 항목들인 출력측 단락시험, 계통전압 순간정전?순간강하시험 및 부하차단 시험 등을 통하여 외부사고에 대한 성능 및 안전성을 평가하였다. 외부사고 성능시험의 주 목적은 시스템의 이상 운전이 아니라 외부의 영향에 따른 시스템의 안전성 및 전력품질을 평가한다. 출력측 단락시험을 수행하기 위해서 전력변환장치를 정격 출력 전압, 정격 출력 주파수 및 정격 출력에서 운전한 후, 교류 전원장치는 단락 전류를 검출하여, 사고 발생 후 0.3초 이내에 개방하도록 설정하였다. 여기서, 단락 저항 Rsc를 정격 전류의 10배 이상에 해당하는 부하와 같은 값으로 설정하였다. 스위치 SWSC를 폐로하여 단락 상태를 만들며, 이 때 전력변환장치의 출력전류와 차단 또는 정지 시간을 측정하였다. 실험 결과에 대한 판정기준은 단락전류를 검출하여 0.5초 이내에 개폐기 개방 또는 게이트 블록 기능이 동작하여 시스템을 안정하게 정지시키고 시스템 어떤 부위에도 손상이 없어야 한다. 실험 결과 파워컨디셔너의 출력전류 및 차단 또는 정지된시간이 40ms로 나타났고, 출력전류의 파형도 매우 안정함을 볼 수 있었다. 이와 같이 모든 실험을 수행한 결과 외부사고에 대하여 시스템이 안전하게 정지하는 등 연료전지 시스템의 안전성을 확인하였다.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.5
• /
• pp.519-530
• /
• 2013

Cyclic tests on modular building units for low-rise buildings composed of stud panels and a light-weight steel perimeter frame, were performed to evaluate the earthquake resistance such as stiffness, load-carrying capacity, ductility, and energy dissipation per load cycle. The strap-braced and sheeted stud panels were used as the primary lateral load-resistant element of the modular building units. Test results showed that the modular building units using the strap-braced and sheeted stud panels exhibited excellent post-yield ductile behaviors. The maximum drift ratios were greater than 5.37% and the displacement ductility ratios were greater than 5.76. However, the energy dissipation per load cycle was poor due to severe pinching during cyclic loading. Nominal strength, stiffness, and yield displacement of the modular building units were predicted based on plastic mechanisms. The predictions reasonably and conservatively correlated with the test results. However, the elastic stiffness of the strap-braced stud panel was significantly overestimated. For conservative design, the elastic stiffness of the strap-braced stud panel needs be decreased to 50% of the nominal value.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.341-350
• /
• 1997

The objective of this study is to investigate the structural behavior of the composite slabs with the new metal deckplate. The new deckplate can be used as structural member with topping concrete. So several experiments of this structural test and the fire resistance test were done. From this experiments. slabs with new metal deckpklate were verified as composite slabs. In this paper, this verifications were compared with the international design methods. For experiment. 49 specimens were made. the main parameters are deckplate thickness (1.2mm. 1.6mm) depth of topping concrete(85mm. 90mm). support condition(simple, 2-span), shear reinforcment(studs), span(2.7m, 3.0m, 3.3m. 3.6m. 3.9m) and shear span(L/3, L/4, L/7). We analyzed the structural behavior of composite slab throughout the moment-curvature relationship which is obtained with the program using the computer language. Turbo C. From this development for slab system, the reinforced concrete or steel structure building may be easy, economical for construction, And informations about the structural behavior of composite slabs will be utilized to established korea standard.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.169-174
• /
• 2007

Building integrated photovoltaic(BIPV) system operates as a multi-functional building construction material. They not only produce electricity, but also are building integral components such as facade, roof, window and shading device. As PV modules function like building envelope in BIPV, combined thermal and PV performance should be simultaneously evaluated. This study is to establish basic Information for designing effective BIPV by discovering relations between temperature and generation capability through experiment when the PV module is used as roof material for houses. To do so, we established 3kW full scale mock-up model with real size house and attached an PV array by cutting in half. This is to assess temperature influence depending on whether there is a ventilation on the rear side of PV module or not.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.193-196
• /
• 2008

This paper presents an experimental study to investigate enhanced performance of the masonry walls strengthened in shear and ductility using honeycomb steel mesh. The performance of masonry walls strengthened with steel mesh will compare with unreinforced masonry walls to show the performance of reinforced masonry walls. According to the experiment, it is expected that this system is effective to enhance the shear strength and ductility of the masonry walls.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.59-67
• /
• 2005

Building information is primary source in many applications such as mapping, telecommunication, car navigation and virtual city modeling. While aerial CCD images which are captured by passive sensor(digital camera) provide horizontal positioning in high accuracy, it is far difficult to process them in automatic fashion due to their inherent properties such as perspective projection and occlusion. On the other hand, LIDAR system offers 3D information about each surface rapidly and accurately in the form of irregularly distributed point clouds. Contrary to the optical images, it is much difficult to obtain semantic information such as building boundary and object segmentation. Photogrammetry and LIDAR have their own major advantages and drawbacks for reconstructing earth surfaces. The purpose of this investigation is to automatically obtain spatial information of 3D buildings by fusing LIDAR data with aerial CCD image. The experimental results show that most of the complex buildings are efficiently extracted by the proposed method and signalize that fusing LIDAR data and aerial CCD image improves feasibility of the automatic detection and extraction of buildings in automatic fashion.

• Journal of Energy Engineering
• /
• v.14 no.1
• /
• pp.24-29
• /
• 2005

In order to evaluate the performance of fire-protection foams used to protect structures from heat and fire damages, the thermal characteristics of them are experimentally investigated. This research focuses on the destruction of a fire-fighting foam subjected to heat radiation. A simple repeatable test apparatus for fire-protection foams subjected to fire radiation is developed. It involves a foam generation equipment, a fire source for heat generation, repeatable test procedures, and data acquisition techniques. Results of the experimental procedure indicated that each thermocouple within the foam responded in a similar manner and gradually to a temperature of 115℃～20℃. At this point, each trace generally rises to a temperature of approximately 90℃. The temperature gradient in the foam as time passes increases with increasing the foam expansion ratio. In addition, it is found that the temperature gradient along the foam for depth decreases with increasing the foam expansion ratio.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1055_1056
• /
• 2009

본 논문은 신.재생 에너지원 중 태양광을 이용한 소용량의 가정용 및 건물용 태양광 발전 시스템인 단상 계통연계형 인버터의 출력전류 고조파 발생에 대한 연구로서 상용제품에 대한 실험 결과를 제시하고, 이를 모의한 실험을 통하여 단상 계통연계형 인버터의 출력전류 고조파 억제를 위한 연구 근거로 제시한다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.259-266
• /
• 2005

The objective of this study was to determine which mixture types are suitable for maintaining grazing pasture at alpine area. The mixtures types were evaluated by the botanical composition and dry matter (DM) of forage. The experiment was carried out on the grazing pasture at Daekwanryeong area (altitude ; 840m) from 1991 to 1993. Treatments were composed of seven mixture types made of both different components and amounts of sowing. The components of each mixture were Orchardgrass (OG), Tall fescue (TF), Timothy (TI). Kentucky bluegrass (KBG), Reed cannarygrass (RCG), Red clover (RC) and Ladino clove. (LC). The seeding .ate of OG, TF, TI, KBG and LC in control(C) was 18:9:8:3:2 kg/ha, respectively and those of treatments of T1 (OG:TF:KBG:LC), T2 (OG:TF:KBG:RC), T3 (OG:TI:KBG:LC), T4 (OG:TF:KBG:LC), T5 (OG:TI:KBG:LC) and T6 (OG:RCG:KBG:LC) were 24:8:2:2, 24:8:2:2, 26:8:2:2, 8:28:2:2, 5:24:2:2 and 8:26:2:2 kg/ha, in seeding rate. respectively. The plant heights of mixtures in 1991, 1992 and 1993 were 33, 37, and 33 cm on average of before and after grazing, respectively. The 12cm of stubble height was left after grazing during 3 years which can result in the reduction of forage intake and utilization. This result indicates the grazing period will be needed to adjust. The proportions of TI, OG, KBG and LC in mixtures were increased constantly, and the proportions of weeds and bare lands were little. The T5, in which the smaller amounts of seeds were sown, is considered as proper mixture type for Alpine pasture. The DM yield tended to increase with the increased grazing period, and the highest DM yield was occurred in 1993. No significant difference among treatments was observed for the DM yield, however the 75 was highest (9,344 kg/ha) in the DM yields which is $5.7\%$ greater than the C (8,840 kg/ha). This result indicates that T5 (OG:TI:KBG:LC : 8:24:2:2 kg/ha) is considered to be proper mixture type at alpine pasture considering the botanical composition and forage yield.