• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.317-322
• /
• 2000

We present a compensation method of the phase change upon reflection in the scannll1g whIte light interferometry. which pracl1cally allows precIse 3-D profIle mappmg for compo~Ite target surfaces comprising of multipledissinular matenals. The compensation method estimates the vanatlon 01 pbase change with the spectral distribution of the light source through first-order approximation, and then diIectly compensates the measurement errors by perIormmg two-wavelength white light intetferomctric measurements. Experimental results prove that the proposed self-compensatIOn mcthod is capable of reducing the measmement error in step height gauging within $\pm2nm$..

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.141-146
• /
• 2016

This paper presents a method to improve time interval error for asynchronous communication systems. The proposed method is designed and simulated with multi-phase VCO, interpolator, phase selector, up-down counter, comparator and adder. The simulation results for CAN communication system show that the maximum time interval error can be tightly managed for satisfying the required specification. The proposed frequency modulation method can be properly used for asynchronous communication systems requiring high reliability.

• Progress in Medical Physics
• /
• v.5 no.1
• /
• pp.41-53
• /
• 1994

The accurate localization of electrical sources in the brain is one of the most important questions in EEG, especially in the analysis of evoked responses and of epileptiform spike activity. A detailed simulation study of single dipole source estimation based on EEG is given in this paper. The effects of dipole model parameters on single dipole source tracing in EEG are examined in some detail using the Monte Carlo simulation. The error of source localization is found to be greatly influenced by how the electrodes are distributed over the head and the number of them.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.33-40
• /
• 2011

In this paper, underwater acoustic communication experiment was carried out to test a performance of single carrier digital modulation schemes. The communication experiment was performed at real sea and tested modulation schemes are ASK, FSK with non-coherent detection and QPSK with coherent detection. A modulated image data was transmitted with data rates of 600bps~3Kbps. From the results of BER of the demodulated signal, ASK and FSK show the achievable BER of $10^{-3}{\sim}10^{-4}$ without compensation techniques and QPSK show that of $10^{-4}$ with linear equalizer.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.1
• /
• pp.25-37
• /
• 2012

Many statistics, such as Cohen's (1960) ${\kappa}$, Scott's (1955) ${\pi}$, and Park and Park's (2007) H have been proposed as measures of agreement to represent inter-rater reliability. This study compared bias, SE, MSE, and CV of the measures of agreement with nominal and ordinal categories in the balanced marginal distributions, and those with nominal categories in the two paradoxical situations. As a result, in all cases, AC1and Hhad smaller SE and CV.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.53-61
• /
• 2000

능동 제어기를 설계하기 위해서는 제어대상 구조물의 수학모델의 구해야한다. 그러나, 무한차원의 구조물에 대하여 정확한 모델을 구하는 것은 불가능하므로 유한차원인 저차원화된 모델을 사용하여 제어기를 설계한다. 그러나, 실제 구조물과 저차원화된 모델사이의 오차에 의하여 제어기의 성능이 저하가 되면 제어기와 구조물의 상호작용, 지진과 같은 오란 등의 불확실성, 지진시 구조물의 동적 특성 변화로 인하여 제어기의 성능이 더욱 저하가 된다. 이러한 저하 요인은 제어기 설계시 요구되는 구조물의 수학모델에 대한 불확실한 요소로 작용하기 때문에 제어성능의 저하를 일으키며 응답의 불안정을 유발하기로 한다. 본 연구에서는 질량형 능동제어기(AMD)가 설치된 3층 건물 모형의 모델 오차에 관한 불확실성을 반영한 강인제어기법을 적용하여 제어성능과 안정성을 실험을 통하여 분석하였다. 강인제어 기법인 $\mu$ 합성법에 요구되는 여러 가지 가중함수인 주파수필터는 건물과 AMD의 특성, 모델 오차, 제어율과 AMD 성능의 , 측정잡음 및 지진외란의 특성 등을 고려하여 정량적으로 선택되었다. $\mu$합성법에 의하여 제어기를 설계하였으며 강인성을 비교하기 위하여 불확실성이 고려되지 않는 LQG 기법에 의한 제어기를 선택하였다. $\mu$합성법은 규정된 불확성에 대하여 제어의 강인성을 가지므로 동적특성이 바뀐 건물모형에 관한 강인성을 LQG 기법에 의한 제어성능과 비교하였다. 그 결과 동적특성이 변화된 건물에 대하여 $\mu$합성법만이 제어의 효율성이 유지되는 강인성을 나타내었다.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.29-36
• /
• 2016

Accuracy of GPS (global positioning system) deteriorates dramatically or positioning is impossible in urban area occasionally since high-rise buildings and elevated roads make the reception of navigation signal very difficult so that number of visible satellites decreases. In these cases, vertical error usually becomes much larger than the horizontal error due to the intrinsic geometry of GPS satellites. To obtain more accurate and reliable height information, this paper proposes a hybrid method that combines GPS and a low-cost barometric altimeter. In the proposed method, the sea-level pressure and the sea-surface temperature are applied to the output of the altimeter. Next, the difference between the ellipsoid and the geoid is compensated. Finally, a simple Kalman filter combines the compensated barometric altitude and the GPS height. By static and car experiments, performance of the proposed method is evaluated. By the experiment results, it can be seen that the proposed method improves the altitude accuracy considerably.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.51-60
• /
• 2002

The Monte-Carlo simulation of statistical analysis is used to investigate the final conditions of states as well as the footprint boundaries resulting from the atmospheric re-entry dispersions. The re-entry dispersions in this paper are specified by a $7\times7$ covariance matrix of latitude, longitude, altitude, bank angle, flight path angle, heading error, and range at entry velocity. The error sources that affect these at re-entry for a deboost are the uncertainties associated with atmospheric density and temperature, initial errors, wind, and estimation error of aerodynamic coefficients. Using $3{\sigma}_n$ deviations of these errors and a nominal flight trajectory, the covariance matrix of state variables can be determined by performing a trajectory error analysis. Major considerations in the application of the Monte-Carlo method are the simulation of perturbed trajectories, bank reversal, and determination of the impact points for each of these trajectories. This paper analyzes the results of uncertainties from the viewpoint of aero-coefficients and bank reversal.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.15-28
• /
• 1995

The GPS positioning involves not only 'natural' errors associated with the satellites position errors, refraction of EM wave in the ionosphere, etc., but also 'artificial' errors associated with the operation of S/A (Selective Availability). In this paper, we present the principles, accuracies and applicabilities of our personal DGPS method, which employs the position-correction method on the GPS positionings data collected at the reference and the remote sites. The essential requirement of our DGPS method is that two GPS receivers should utilize the identical Navstar satellites at the same time. The positioning error (1 drms) of the stand-alone GPS is of an order of a few tens meters, while that of horizontal position by our DGPS method is about 1m and that of vertical position is about 2m We applied out DGPS technique in positioning moving objects, and obtained satisfactory results in tracking the trajectories of a car on the road and the those of drifters in the sea.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.109-117
• /
• 2015

In this paper, we proposed error-reducing method to source or measure a current or voltage for LED in the I-V characteristic analysis system using a digital signal processor (DSP). this method has the advantage of reducing a non-linear circuit error and random error. random error can be reduced using recursive averaging technique and non-linear circuit error can be reduced using 2rd polynomial regression calibration parameters fitting with measured sample data. it corrects measured error of IR, VR, VF1, VF2, VF3 of LED using calibration parameters. experimental results show that can be performed with about 0.017~0.043% accuracy.