• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.123-132
• /
• 2010

Six populations of the diamondback moth, Plutella xylostella, were collected from the different national areas for resistance and reared in laboratory for two sensitive population. These populations of P. xylostella were examined the developed resistance against commercial products of Bacillus thuringiensis. There were 3 products with B. thuringiensis subsp. kurstaki including Tyuneup$^{(R)}$, Thuricide$^{(R)}$ and Geumulmang$^{(R)}$ and 2 products with B. thuringiensis subsp. aizawai including Tobagi$^{(R)}$ and Scorpion$^{(R)}$. The sensitive population of diamondback moths were provided from National Academy of Agricultural Science (NP) and Highland Agriculture Research Center (GR population) and field populations were caught from 6 different national areas. Resistance against Tyuneup$^{(R)}$ was developed 4.8 and 2.5 times in SP and HS compared with GR population of diamondback moth, respectively. In case of Geumulmang$^{(R)}$, it was developed 9.9 and 6.8 times in SP and NM population compared with NP population, respectively. Otherwise, Tobagi$^{(R)}$ was showed higher resistance in HS than any other population compared with GR population, however, Scorpion$^{(R)}$ that is a same strain with Tobagi$^{(R)}$, was showed only double resistance to SP population. It was supposed that the development of resistance to B. thuringiensis might be caused by the continuous application of the specific commercial product at the specific area. So, we need to use the commercial products of B. thuringiensis in rotation with different B. thuringiensis strains. In the other hand, when HS population with highest resistance were reared in laboratory, their resistance ratio was rapidly dropped to 1.1 times at second generation. We have to examined the resistance mechanism of the diamondback moth to B. thuringiensis strains.

• The Korean Journal of Malacology
• /
• v.29 no.4
• /
• pp.263-272
• /
• 2013

The development of swift's scallop Chlamys swiftii, reared in the laboratory, has been examined through the investigation of morphological characteristics in fertilized egg, larvae and juvenile. Eggs were fertilized with a dilute sperm solution to improve the survival of fertilized eggs. Developing larvae were maintained at a temperature of $16{\pm}0.5^{\circ}C$ and salinity concentration of 33 ppt. We have investigated the fertilization rates and egg number spawned at several stimulating conditions such as sunlight exposure, air dry, seawater temperature rise ($5^{\circ}C$) and seawater temperature rise ($5^{\circ}C$) after exposure of air dry for spawning induction of swift's scallop Chamys swiftii. Stimulation treated with sunlight exposure and seawater temperature rise ($5^{\circ}C$) have shown the spawning number of 700,000-900,000 and 700,000-800,000 per individual, respectively while stimulation treated with seawater temperature rise ($5^{\circ}C$) after exposure of air dry have shown the high spawning number of 1,000,000-1,500,000 per individual. Survival rate of D-shaped larvae of swift's scallop put into the different seawater temperatures of $8^{\circ}C$, $12^{\circ}C$, $16^{\circ}C$, $20^{\circ}C$ and $24^{\circ}C$ has been 4.1%, 11.6%, 32.7%, 18.6% and 3.2%, respectively. Fertilized eggs with the diameter of $72{\mu}m$ developed into trochophore larvae of $103{\pm}3.8{\mu}m$ shortly after 35 hours and to D larvae of $129{\pm}10.4{\mu}m$ shell length within 72 hours. It took 336 hours to become initial Umbo-stage larva of $145{\pm}16.8{\mu}m$ shell length. Post larvae, which have been $197{\pm}13.6{\mu}m$ shell length, spontaneously have settled in the attachment substances. It have required 528 hours from fertilized eggs to early attached juvenile to become initial juvenile size of $245{\pm}15.8{\mu}m$ shell length.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.43-48
• /
• 2020

Fe₂O₃ nanoparticles with the mixed structure of cubic and nanorod were synthesized by precipitation, hydrothermal, sol-gel method, etching process and heat treatment. Fe₂O₃/TiO₂ core-shell (CS) of type Fe₂O₃@TiO₂ composite was fabricated on a 20 nm nanolayer of TiO₂ coated on the surface of Fe₂O₃ nanoparticles. Fe₂O₃/TiO₂ yolk-shell (YS) composite was prepared by chemical etching and heat treatment of Fe₂O₃/TiO₂ CS nanoparticles. Physical properties of Fe₂O₃, Fe₂O₃@TiO₂ CS and Fe₂O₃@TiO₂ YS nanoparticles were characterized by FE-SEM, HR-TEM and X-ray diffraction. The solar reflectance, commission internationale de l'Elcairage (CIE) color coordinate and heat shield temperatures of Fe₂O₃, CS and YS type Fe₂O₃@TiO₂ pigments filled with poly acrylate (PA) paints were investigated by UV-Vis-NIR spectrometer and homemade heat shield temperature measuring device. The Fe₂O₃@TiO₂ YS red pigment filled PA composite exhibited excellent near infrared light reflecting performance and also reduced the heat shield temperature of 13 ℃ than that of Fe₂O₃ filled counterparts.

• Korean Journal of Agricultural Science
• /
• v.8 no.2
• /
• pp.224-230
• /
• 1981

Threshing forces of seven varieties, that is, three Japonica type varieties-Irri 348, Irri 345, and Milyang 15, and four Indica type varieties-Milyang 23, Irri 342, Suweon 294 and Suweon 287-, which have been cultivated in the standard fertilization field being at Chungnam Provincial Office of Rural Development, Youseong, Chungnam-do, they were measured every other day in the period from September 28 to October 20 which were included the proper harves ting time. Also the threshing forces were checked in three-dimensional directions. Relationships between threshing forces and moisture contents of the unthreshed rice were examined in the laboratory as dried in the natural condition. The results of this study were as follows; 1. The mean threshing force of Japonica type varieties was about 1969r. and that of Indica type varieties was about 113gr. when external force was loaded in the direction parallel to the grain. 2. The threshing force bent to the grain was about 9.8through 28.2gr. equal to 7 through 21 percent to the threshing force parallel to the grain in Indica type varieties meanwhile about 59.8 through 115.0gr equal to 33 through 50 percent in Japonica type varieties. 3. Under the warmer temperature than $0^{\circ}C$, the change of threshing forces was not great in this experimental period on the harvesting dates. 4. The threshing force decreased s lightly as moisture content decreased in natural drying under the shade after cutting. 5. The threshing force of the lower portion was a little biger than that of the upper portion in an ear.

• Korean Journal of Environment and Ecology
• /
• v.28 no.5
• /
• pp.531-541
• /
• 2014

This research investigated the reproduction cycle, litter size, and the effects of factors of red-tongue viper snake inhabiting in Jeju Island, to delve into their life strategy. Field survey was conducted in Jeju Island from May 2006 to November 2008. Reproduction cycle was analyzed through measurements of testis and follicle sizes in laboratory from March 2009 to December 2010. According to the research results, the sizes of red-tongue viper snake's testis and follicle clearly changed seasonally. The number of eggs within the oviduct were greater on the right side ($2.6{\pm}1.0$ eggs, n=16) than on the left side ($1.8{\pm}0.5$ eggs, n=16) (t=-2,721, p<0.05). Average (${\pm}SD$) of survival litter size (SLS) was $4.4{\pm}1.7$ (1~9, range), while total litter size (TLS) was $4.7{\pm}1.5$ (3~9, range), which were not statistically significant. However, their litter sizes were similar to the number of eggs within the oviduct (t=0.039, P>0.05). Relative litter mass (RCM) was $0.42{\pm}0.13$ (0.18~0.79, n=33), and tended to increase, as maternal condition of pre-parturition (MCPPI) was getting better. The sexual ratio of delivered litters showed no significant difference between male and female red-tongue viper snakes (♂:♀ = 1.15:1, n=73 ; ${\chi}^2$=0.342, P>0.5). Average neonate mass showed a weak correlation with maternal mass of pre-parturition (MMPP1) (r=0.387, P<0.05, n=33). Average neonate Snout-vent length (SVL) also demonstrated a weak correlations with maternal SVL (r=0.399, P<0.05, n=33) and MMPP1 (r=0.344, P<0.05, n=33). Average neonate mass and maternal SVL approached significant probability (r=0.323, P=0.067, n=33). This indicates that mother snakes can bear bigger litter due to its larger size. In some cases, litter's weight decreases as mother snakes are bearing more litter; however, the red-tongued viper snake did not show such exchange relationship. From this, it can be conjectured that a red-tongued viper snake has peculiarity of its own species. The research results are predicted to be used as the basis to find a life history of red-tongued viper snake.

• Korean Journal of Ichthyology
• /
• v.4 no.1
• /
• pp.1-13
• /
• 1992

The gobiid fish, Luciogobius guttalus Gill has an anguilliform with some blackish and reddish brown color in life. It grows up to 90mm in total length. The specimens have been collected from several localities in the southern parts of Korea and Hokkaido, Japan. During the ebb tide, the fish was found in high level of intertidal zone exposed to the air among pebbles in the hollows and slopes of rocks. There are also some other small gobiid fishes comprising 3 species of relative gobies and 1 species of blennioid fish. A total of 5 egg masses were collected from the coast of Haeundae in April to May 1990. Each egg mass was deposited in one layer on the underside of a stone embedded in pebbles and guarded by the male parent. The eggs are club-shaped ranging from 2.71 to 2.80mm in long axis and from 0.65 to 0.74mm in short axis. The eggs were hatched in 98 hours after incubatied at the temperature varying from 19.5 to $25.5^{\circ}C$The newly hatched larvae were from 3.85 to 4.00mm in total length with 35~36 myomeres. In eleven days after hatching, total length reached 5.50mm. The part of the fin-fold of the future dorsal and anal fins became high. In sixteen days after hatching, the lavae averaged 6.20mm in total length and the caudal notochord flex at $45^{\circ}$. The larvae reached the juvenile stage in 48~50 days after hatching and attained 12.80~14.00mm in total length, and all fin-rays was formed. Ossification of the cranium took place at 5.50mm of mean total length in parasphenoid and basioccipital. Ossification of the visceral skeleton occurred in areas where active movements of bones are required, notalbly in the parts of feeding and respiration. Vertebrae began to develop from the anterior end to ossify posteriorly. Neural and haemal spines of vertebrae ossified always prior to the corresponding centra. When larvae reached to about 6.60mm in mean total length (17~18 days after hatching), jaw bones were more repidly ossified than vertebrae and cranium. Ossification of all bones nearly completed when the larvae reached to 13.40mm in mean total length (47~50 days after hatching).

• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.27-36
• /
• 2015

The improved analytical method with gas chromatography (GC) and GC-mass spectrometry was established to identify and quantify disaccharides and trisacchrides in honey. In this method, the analysis of trimethylsilyl (TMS), TMS-oxime and TMS-methoxime sugars takes into account the determination of a single peak of complete separation on the chromatogram. The number of possible peaks for the qualitative and quantitative determination of TMS, TMS-oxime, and TMS-methoxime sugars was 17, 22, and 25, respectively. This new analytical method allowed for the determination of diand trisaccharides in honey by TMS-oxime and TMS-methoxime derivatives. This study suggested that the improved method is more suitable and precise than the other analytical methods for the simultaneous determination of sugars in honey.

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.117-123
• /
• 1968

A simplest and best method to find out lime requirement for Korean soils is described. Twenty six top soil samples were collected from various localities and chemical characteristics were dertermined. Three different buffer curve methods were employed as the standard to find out the most reliable test for lime requirement. In addition, the lime requirement test by the Shoemaker's and Woodruff's as well as the O.R.D. kit method were compared with the most reliable buffer curve method. The results may be summarized as follows. 1. The regression equation of the most reliable lime requirement by buffer curve method, y, on percent base saturation of various soils, X, was y=9.69-0.106 X and the negative correlation coefficient r=-0.84 was statistically significant at 5% level. 2. Lime requirement test by the best, buffer curve, method was more well correlated with the sum of exchangeable hydrogen and exchangeable aluminum contents of the soil samples than the exchangeable hydrogen content only. 3. The ordinary buffer curve method for lime requirement is more reasonable than the lime requirement test by the buffer curve prepared after addition of 1 normal potassium chloride or calcium chloride solutions. 4. The lime requirement tests by the most reasonable buffer curve method, X, and by the Woodruff's, the Shoemaker's and O.R.D. kit were compared. The best method for laboratory lime requirement test was the Shoemaker's method and the O.R.D. kit method also was good enough for the field test and these two method are recommended as the unified method of lime requirement test in each soil testing laboratories throughout Korea.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.469-477
• /
• 2016

To evaluate the $CO_2$ storage capacity for the reservoir rock, the laboratory scale technique to measure the amount of $scCO_2$, replacing pore water of the reservior rock after the $CO_2$ injection was developed in this study. Laboratory experiments were performed to measure the $scCO_2$ displacement efficiency of the conglomerate and the sandstone in Janggi basin, which are classified as available $CO_2$ storage rocks in Korea. The high pressurized stainless steel cell containing two different walls was designed and undisturbed rock cores acquired from the deep drilling site around Janggi basin were used for the experiments. From the lab experiments, the average $scCO_2$ displacement efficiency of the conglomerate and the sandstone in Janggi basin was measured at 31.2% and 14.4%, respectively, which can be used to evaluate the feasibility of the Janggi basin as a $scCO_2$ storage site in Korea. Assuming that the effective radius of the $CO_2$ storage formations is 250 m and the average thickness of the conglomerate and the sandstone formation under 800 m in depth is 50 m each (from data of the drilling profile and the geophysical survey), the $scCO_2$ storage capacity of the reservoir rocks around the probable $scCO_2$ injection site in Janggi basin was calculated at 264,592 metric ton, demonstrating that the conglomerate and the sandstone formations in Janggi basin have a great potential for use as a pilot scale test site for the $CO_2$ storage in Korea.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.125-131
• /
• 2018

The effect of 1-methylcyclopropene (1-MCP) in the storability of kimchi cabbage at cold storage condition was investigated. Kimchi cabbage (Brassica campestris L. cv Ryouckgwang) was divided four groups, forced air cooling (FAC), FAC + 0.03 mm linear low density polyethylene liner (Liner), $FAC+2{\mu}L{\cdot}L^{-1}$ 1-MCP (1-MCP), and FAC + 1-MCP + Liner. After each treatment kimchi cabbage was stored at $2^{\circ}C$, 95% RH. Quality parameters were weight loss, soluble solids content (SSC), firmness, and color ($CIE\;L^*$, $a^*$, $b^*$, chroma, hue angle). Weight loss during storage was showed significant difference by Liner treatment. In particular FAC + 1-MCP + Liner treatment showed 12.5% reduction after 6 weeks of storage period and minimized the weight loss rate compared to other treatments. SSC of kimchi cabbage was $2.5^{\circ}Brix$ at harvest and FAC + 1-MCP + Liner treatment maintained the SSC until 3 weeks, while in other treatments gradually were increased. The firmness of kimchi cabbage was 24.0 N immediately after harvest and the firmness at harvest time tended to be maintained at 22.6 N after 6 weeks of storage in FAC + 1-MCP + Liner treatment. During the storage period, the color change of the kimchi cabbage leaf can be confirmed by $CIE\;a^*$ and hue angle value. 1-MCP treatment alone did not affect the color change, however 1-MCP + Liner treatment was able to maintain the chromaticity at harvest time while minimizing the change of $CIE\;a^*$ and hue angle. These results suggest that 1-MCP treatment is not effective for the storage of kimchi cabbage but can be maintained for up to 6 weeks when treated with Liner.