• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.204-207
• /
• 2009

LED 광원의 광학적 성능이 발전함에 따라 광원으로서의 광학효율이 기존 광원을 대체할 정도의 수준을 만족하고 있으며, 이에 의해 실내 조명광원으로서 활용도가 점차 증가하고 있다. 하지만, LED 광원의 경우 기존 광원과는 판이한 분광분포를 가지고 있으며, 소형 광원의 군집체로서 조명기구를 형성하기 때문에 이를 이용하는 사용자들에게 이전의 조명기구와는 크게 다른 느낌, 분위기 등을 가질 수가 있다. 본 연구에서는 기존광원과 LED 광원과의 차이점을 분석하고 이러한 차이점 즉, 분광분포 및 조명기구의 구성 형태 등에 따른 피험자들이 느끼는 색 편차, 조명 분위기의 변화 등을 평가 시험할 수 있는 실험실의 구성안을 제시하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1138-1143
• /
• 2011

One of the critical items in radar testing is the ability to evaluate the performance of radar systems under real operational environments. But it takes lots of time and cost to operate real targets and analyze the test results due to a large amount of data based on these complicated environments. In this paper, the Radar Simulative T&E Lab. is introduced, and the test and analysis results of the developing radar for predicting the radar system performance are described in the Radar Simulative T&E Lab. This laboratory could be used to test the far-field characteristics of antenna radiation pattern and to perform an effective radar system test and evaluation using a simulative target generator under a low cost repeating test situation.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.127-129
• /
• 2020

높은 에너지 밀도, 장 수명 등의 특성을 갖는 리튬계열 축전지는 다양한 어플리케이션에 활용되고 있다. 그러나, 리튬계열 축전지의 열화로 인한 출력 특성 저하는 원전 사고 시, 안정적인 전력 공급을 저해하므로 원전 적용을 위해서 리튬계열 축전지의 열화를 일으키는 방사선에 대한 리튬계열 축전지의 강건성 검토가 필요하다. 본 논문은 방사성 동위원소 Co-60, 총 방사선량 100Gy의 저 준위 방사선 조사 시험을 진행하였으며, 이에 따른 리튬계열 축전지의 특성 비교를 위해서 전기적 특성분석 방법을 이용하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6666-6672
• /
• 2015

Various reflectometry methods to locate power cable fault have been studied. But, most related studies has been verifying by simulation and laboratory test and study in conditions similar with real cable fault filed was not performed due to the absence of cable fault test field. Therefore, this paper design and construct test field for the standardized performance test and the operating education of cable fault location equipments. In the constructed test, open, short, half open and poor contact fault at 100m, 200m location of cable was produced and 1km cable role was installed for maximum distance measurement test. The test field will be used in the development and standardization of cable fault location technology, and te performance evaluation and certificate test of the related equipments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1189-1194
• /
• 2013

The Intermediate Heat Exchanger (IHX) of a Very High Temperature Reactor (VHTR) is a core component that transfers the high heat of $950^{\circ}C$ generated in the VHTR to a hydrogen production plant. The Korea Atomic Energy Research Institute manufactured a lab-scale prototype of a Printed Circuit Heat Exchanger (PCHE) as a candidate for an IHX. In this study, as a part of a high-temperature structural integrity evaluation of the lab-scale PCHE prototype made of SUS316L, we carried out high temperature structural analysis modeling and macroscopic thermal and elastic structural analysis for the lab-scale PCHE prototype under helium experimental loop (HELP) test conditions as a precedent study prior to the performance test in HELP.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.111-116
• /
• 2008

콘관입시험(CPT)은 의사정적상태로 수행되는 현장시험방법으로서, 각종 기초구조물의 설계와 더불어 지반조사를 위한 대표적 방법으로 널리 적용되고 있다. 본 논문에서는 콘관입시험결과를 이용하여 사질토 지반에 있어서 지반강도의 상세평가법을 제안하고자 한다. 사질토의 강도는 상대밀도와 응력상태에 따라 변하는 상태의존적 성질을 나타내고 있으나, 이러한 역학적 성질은 실험실 내에서만 측정이 가능한 상태이며, 현장강도의 경험식이나, 대표강도의 평가만이 제안되어 있는 실정이다. 따라서 본 연구에서는 대표적 현장시험방법인 CPT를 이용하여 다이러턴시 특성 평가가 가능하며, 다양한 지반특성치가 반영될 수 있는 현장강도의 상세평가법을 제안하고자 한다. 이를 위해 실내삼축압축시험을 통해 얻어진 강도특성과 역학특성치들을 분석하였으며, 이를 토대로 수정 다일러턴시 평가법을 제안하였다. 제안된 방법의 검증을 위해 가압토조를 이용한 콘관입시험을 수행하였으며, 측정값과의 비교분석을 수행하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.61-65
• /
• 2010

To research and develop a liquid rocket engine injector, it needs empirical studies about the hydrodynamic and spray characteristics such as pressure drop, mixing and atomization. In this study, the design and implementation of lab-scale cold-flow/hot fire test stand which can supply cryogenic propellant and be controlled by time-critical LabVIEW cyclogram logic has been done. In order to visualize the spray of a liquid-centered swirl coaxial injector in cryogenic condition, LN2-GN2 cold-flow test has been done, and combustor assembly and thrust bed for LOX-$GCH_4$ hot-fire test have been fabricated.

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.296-305
• /
• 2018

Spiroxamine, one of fungicides, is used to control powdery mildew in various crops and black yellow sigatoka in bananas. The major strength of spiroxamine is to control powdery mildew in various crops and bananas yellow sigatoka in bananas. The compound has shown a high level of activity, good persistence and crop tolerance. Besides powdery mildew, good control of rust, net blotch and Rhynchosporium diseases been indicated in cereals, together with a complementary activity against Septoria diseases. In 2017, the maximum residue limit (MRL) of spiroxamine established in Korea. According to Ministry of ood and rug afety) regulations, spiroxamine residues defined only parent compound. Thus, a analytical method is needed to estimate the residue level of the parent compound. The objective of this study was to develop and validate analytical method for spiroxamine in representative agricultural commodities. Samples were extracted with acetonitrile and partitioned with dichloromethane to remove the interfering substances. The analyte were quantified and confirmed liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive-ion mode using multiple reaction monitoring (MRM). Matrix matched calibration curves were linear over the calibration ranges ($0.0005{\sim}0.1{\mu}g/mL$) for the analyte in blank extract with coefficient of determination ($r^2$) > 0.99. For validation purposes, recovery studies will be carried out at three different concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates at each level. The recoveries 70.6~104.6% with relative standard deviations (RSDs) less than 10%. All values were consistent with the criteria ranges in the Codex guidelines (CAC/GL40, 2003) and MFDS guidelines. proposed analytical method be used as an official analytical method in the Republic of Korea.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.526-531
• /
• 2003

Condition assessment of concrete structures is essential since their performance affects public safety. Impact resonance testing has been widely used for the nondestructive testing of the concrete structures. In this article, the background, basic principles of the impact resonance testing were described. Not only laboratory studies but also the field applications such as basement concrete of large structure and large slurry wall are described.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.194-196
• /
• 2006

본 논문에서는 새로 개발된 전력품질 보상 장치의 성능을 실험실에서 효과적으로 분석하기 위해 필요한 새로운 부하모의장치를 제안하였다. 제안하는 부하 모의장치는 2대의 PWM 인버터가 직류 단을 공유한 구조로 선형과 비 선형부하를 단일기기로 시험 가능하도록 설계되어 있다. 그리고 전력품질보상기의 하나인 능동전력필터와 연계시험을 수행하였다. 본 논문에서는 제안하는 부하모의장치와 능동전력필터의 연계 특성을 분석할 목적으로 PSCAD/EMTDC 소프트웨어를 이용하여 시뮬레이션 실시하였고 또한 실적용시 타당성을 검증할 목적으로 20kVA 용량의 부하모의장치와 10kVA용량의 능동전력필터를 제작하여 실험을 실시하였다. 시뮬레이션과 하드웨어 실험결과 제안하는 부하모의장치는 능동전력필터의 다양한 보상 능력 검증에 충분히 활용가능함을 알 수 있었다.