In order to help the preservation of the cherry tomato and unshiu orange, antimicrobial paper incorporating grapefruit seed extract and zeolite was applied to the package. Cherry tomato and unshiu orange were packed in a box (38x25x20 cm) attached with antimicrobial paper and then stored respectively at $5^{\circ}C$. During the storage, weight loss, pH total acidity, soluble solid content microbial load and decay ratio were measured as quality indices. pH increase in cherry tomato was observed until 20 days, and decreased with litle difference between the packaging treatments thereafter pH and total acidity decrease in unshiu orange were shown till 30 days, and abrupt change was revealed by 40 days. This was due to physiological disorders. The microbial loads of total aerobic bacteria, and yeast/mold count were suppressed during storage by the box packaging incorporated with antimicrobial agents, which also contributed to reducing the decayed cherry tomato and unshiu orange. Antimicrobial paper was useful fur the reduction of microbial load in cherry tomato and unshiu orange pear without other quality deterioration.
Journal of the Korean Society for Nondestructive Testing
/
v.28
no.2
/
pp.191-198
/
2008
Flow accelerated corrosion (FAC) phenomenon of low alloy carbon steels in nuclear power plant has been known as one of major degradation mechanisms. It has a potential to cause nuclear pipe rupture accident which may directly impact on the plant reliability and safety. Recently, the equipotential switching direct current potential drop (ES-DCPD) method has been developed, by the present authors, as a method to monitor wall loss in a piping. This method can rapidly monitor the thinning of piping, utilizing either the wide range monitoring (WiRM) or the narrow range monitoring (NaRM) technique. WiRM is a method to monitor wide range of straight piping, whereas NaRM focuses significantly on a narrow range such as an elbow. WiRM and NaRM can improve the reliability of the current FAC screening method that is based on computer modeling on fluid flow conditions. In this paper, the measurements by ES-DCPD are performed with signal sensitivity analyses in the laboratory environment for extended period and showed the viability of ES-DCPD for real plant applications.
Proceedings of the Korean Society of Embryo Transfer Conference
/
2002.11a
/
pp.88-88
/
2002
인공수정 및 수정란기술의 활성화에 따라 소에 있어서 인공수정은 90%이상이 실시되고 있으나, 수정란이식은 수정란의 생산이 안정적이지 않아 활성화에 많은 지장을 초래하고 있다. 이의 원인은 수정란이식에 의한 수태율의 저하가 가장 크며, 수태율 향상을 위하여 수란우에 progesterone, hCG 등의 주사가 실시되고 있다. 그러나 이는 수정란의 착상에 있어서 자궁의 환경을 개선한다고 하나, 착상의 정확한 기전의 구명은 미미한 상태이다. 한편 비장유래 macrophage가 황체를 자극하고 TGF-$\beta$의 생산을 유도하는 것으로 보고되고 있으며, IL-I $\alpha$와 $\beta$에 따라 TGF-$\beta$ 생산에 있어서 약간의 차이를 보이는 것으로 보고되고 있다. 따라서 본 연구는 비장유래 macrophage가 TGF-$\beta$의 생산시 임신관련 Cytokine인 IL-I$\alpha$와의 관계를 조사하기 위하여 실시하였다. 임신 및 비임신 도축 암소의 비장을 채취하여 얼음에 채워 실험실로 운반한 후 비장의 표면을 70%의 알콜로 세척하고, 표피를 벗겨 비장조직을 세절하여 10% FBS+DMEM에 넣어 조직을 눌러 짜면서 조직속의 세포를 분리하였다. 세척한 배양액은 4-5$m\ell$를 100mm 유리 petri dish에 넣고 39$^{\circ}C$, 5% $CO_2$, 95% 공기인 배양기에서 2시간이상 배양하였으며, 배양 후 냉장된 buffer A 용액으로 세척하여 유리 petri dish의 바닥에 부착된 macrophage만을 cell scraper로 분리하였다. 분리한 macrophage는 0.5-1 $\times$$10^{6}$ cells/$m\ell$가 되게 조정하여, IL-I 을 0.001, 0.01, 0.1 또한 1 ng/$m\ell$를 첨가하여 농도에 따른 효과를 조사하였고, 각각 24, 48, 72, 96 또한 120시간을 배양하여 시간에 의한 효과도 실시하였다. 각 배치구에서 얻어진 배양액은 TGF-$\beta$를 조사하기 전까지 -2$0^{\circ}C$에 동결 보존하였다. TGF-$\beta$의 측정은 TGF-$\beta$ kit(promega, USA)를 이용하여 실시하였으며, 통계학적 분석은 Anova test를 Statview program을 이용하여 분석하였다. 시험의 결과 대조구에 비해 IL-I 첨가구는 2-3배의 TGF-$\beta$생산을 보였으며, 배양시간에 따른 생산은 시간이 지남에 따라 약간 상승하는 경향을 보였으나, 유의적인 차이를 보이지는 않았다. 또한 IL-I의 농도에 따른 생산의 변화는 IL-I의 농도에 따라 약간의 차이를 보였고 유의적인 차이는 인정되지 않았다. 임신 및 비임신의 경우 임신우의 비장 macrophage가 비임신보다는 약간 상승하는 거스로 나타났다. 이상의 결과로 볼 때 IL-I $\alpha$ 는$\beta$subunit 보다 TGF-$\beta$ 생산에 있어서 서로 다른 양상을 보일 것으로 추정되며, IL-I은 macrophage의 직접적인 영향을 주기보다는 황체세포를 매개로 한 자궁에 TGF-$\beta$의 생산을 유도하는 것으로 사료되며, 임신관련 cytokine에 대한 다양한 연구가 요구되고 있다.
Numerical simulations of CIEMAT column test in Spain are performed to investigate the coupled thermo-hydro-mechanical (THM) behavior of MX80 bentonite pellets using TOUGH2-FLAC3D. The heater power and injection pressure of water in the numerical simulations are identical to those in the laboratory test. To investigate the applicability of the thermo-hydraulic (TH) model used in TOUGH2 code to prediction of the coupled TH behavior, the simulation results are compared with the observations of temperature and relative humidity with time. The tendencies of the coupled behavior observed in the test are well represented by the numerical models and the simulator in terms of temperature and relative humidity evolutions. Moreover, the performance of the models for the reproduction and prediction of the coupled TH behavior is globally satisfactory compared with the observations. However, the calculated stress change is relatively small and slow due to the limitations of the simple elastic and swelling pressure model used in numerical simulations. It seems that the two models are insufficient to realistically reproduce the complex coupled THM behavior in the bentonite pellets.
Thermal conditions in practice at the traditional bronze workshop of the Korean Folk Village in Yongin were examined along with the microstructures of some high tin bronze objects made there. Laboratory experiments approximating the conditions of the workshop were also carried out and the results were compared. The operating temperature of the workshop furnace was measured to range from $750^{\circ}C$ to $850^{\circ}C$ while the surface temperature of an object, upon its removal from the furnace for additional thermo-mechanical treatments, was generally in the range of $600^{\circ}C$ to $685^{\circ}C$. This variation in working temperatures was reflected in varying microstructures developed upon quenching. The products of the Folk Village were found to consist of microstructures where the ${\alpha}$ grains of the Cu-Sn system were distributed in the background of different phases including the ${\beta}$-martensite phase, retained ${\gamma}$ phase, ${\alpha}+{\delta}$ eutectoid or their mixtures. This variability, which is also identified in objects made in ancient times as well as in our laboratory experiments, suggests that the actual thermal conditions given during the quenching treatments are much more complicated than is inferred from the temperature measurements. This paper will present detailed accounts of the thermo-mechanical treatments as observed in the high tin bronze workshop of the Korean Folk Village and discuss the evolution of varying microstructures in terms of the substantial variability involved in the implementation of the traditional forged high tin bronze technology of Korea.
Experiments were carried out with purified technical grade and two types of impregnated and sand-coated granules of carbofuran, in order to investigate the release patterns in water and the persistence of this chemical in soils. The results obtained are summarized as follows: 1) As regards to release velocity in water, impregnated granule was found to be faster than sand-coated granule. The time to reach maximum concentrations of carbofuran in water from technical carbofuran, impregnated granule and sand-coated granule was 0.5, 3 and 5 days, respectively. 2) Degradation rate of carbofuran in soils decreased in the order of technical carbofuran, impregnated granule, sand-coated granule regardless of soil types and application rates. Degradation of carbofuran in flooded soil was faster than in non-flooded soil. Soil flooding appeared to be the main factor in promoting the degradation of carbofuran in the soil. 3) When carbofuran was fortified in soils in the form of technical carbofuran, impregnated granule or sand-coated granule, the persistencies of two terminal residues of carbofuran, that is, 3-hydroxy carbofuran and 3-keto carbofuran decreased in the order of sand-coated granule, impregnated granule and technical form.
Journal of the Korea Organic Resources Recycling Association
/
v.17
no.4
/
pp.91-102
/
2009
In this study, to estimate the transforming (runoff and leachate) rate of the organic fertilizer made of livestock resources to farm land, laboratory scale test was conducted and the results were obtained as follows: The runoff volume from farm land showed the tendency of increase according to the increase of rainfall intensity. The most rainfall leachated into the underground at the rainfall intensity of 20mm/hr, and rainfall of 5L or less leachated at the rainfall intensity of > 32.4 mm/hr. This shows that surface runoff largely depends on the rainfall intensity when soil characteristic and hardness are similar in each site. When liquid compost was fertilized, the surface runoff was similar with the results from the reactor fertilized by compost, and leachate flow was found to be lower than compost. The runoff ratio of contaminant parameters from farm land were BOD 0.00003,, $COD_{cr}$ 0.00006, TN 0.00056, TP 0.00011, TOC 0.00005, Especially, the runoff ratio of TN showed 10 folds higher than other parameters. On the other hand, the runoff ratio of SS showed higher value of 0.001, and colloid particles of soil caused this result rather than the leachate from compost fertilizer. At all ranges of rainfall intensity, fertilizer removal ratio by farm land was found to be 94.9~98.4% for compost and 85.8~98.1% for liquid compost in terms of BOD. For TN, it resulted in 96.6~98.4% for compost and 97.2~98.5% for liquid compost, and thus the most fertilizer from livestock resources were shown to be reduced through farm land application.
In an attempt to evaluate the current research status of genetically modified (GM) plants, the scientific research publications in Korea as well as in international SCI journals were screened. About 190 research articles related to the development of GM plants were searched from 10 different domestic journals in the last 12 years (Jan. 1990 to Sept. 2002), The researches in 65 articles were carried out with tobacco plant, 20 with rice, 19 with potatoes, and less then 9 articles from each other plant species, respectively, In total, 38 different plant species were being subjected for the development of GM plants. In particular, there was only one article for each major staple grains such as wheat, barley, soybean, and maize. In more than 47% of total published articles, scientists mainly focused on the basic research such as developing transformation system (46 articles), gene expression study in transgenic plants (34), and vector constructions (10). In addition, 28 articles which main authors are Korean scientists were searched from 11 different international SCI journals. Again, major plants for GM research were tobacco (10) and rice (7). More than 50% of published articles were focused on the basic research, gene expression study with transgenic plants (16). The publications on the research of disease-resistant plants were 7 articles, 3 for the development of stress-resistant and 2 for the herbicide-resistant plants, respectively. It is believed that the last 10 year's investment through government organizations has just strengthen the capacity for the next big stride on agricultural biotechnology in Korea.
This interlaboratory study was designed to evaluate protozoan test methods in water and to predict the major causes of deviation of the methods. Each of four laboratories with previous experience of protozoa analysis in water participated, and met the initial performance criteria of EPA 1623 method provided. The protozoan analysis procedure consists of filtrations, concentration, immunomagnetic separation, dyeing (staining) and counting with observation. We tested three different filtration equipments: capsule filter for 10 L of surface water, and high volume (HV) capsule filter and membrane filter for 100 L of finished water. When the recovery of each step of the procedure was evaluated with EasySeed, the commercial stock of each 100 Cryptosporidium and Giardia, immunomagnetic separation and filtration step were the most crucial steps affecting the stability of the recovery, especially for Cryptosporidium. There was no significant difference of recovery among the filtration methods. Recovery of protozoa from source water were evaluated with spiked EasySeed as matrix tests. The recoveries of Giardia increased significantly in the matrix tests compared those in the deionized water. We also applied red stained mixture stocks of Cryptosporidium and Giardia called ColorSeed as internal standards of water sample tests. The recoveries of both EasySeed and ColorSeed in samples tested were within the range of the criteria, however, the Giardia recoveries using ColorSeed decreased significantly. Further optimization study with ColorSeed will be necessary, considering the convenience of using the internal standard without additional sample analysis. The significant factors of the recovery variation were identified as the differences of laboratories as well as water quality and type of the stock for spiking. The results of this study emphasize the importance of the quality assurance program for protozoan analysis lab in water.
This study was carried out to cryopreserve and to investigate characteristics of semen in Hanwoo. Semen was obtained from bulls selected by Daekwanryeong Branch station. Semen was collected each morning of the experiment, placed in water jacketed tubes at 37$^{\circ}C$, and trans-ported to the research laboratory within 10 minutes. Semen was extended with Egg yolk-glycerol extender to contain 50${\times}$10$^{6}$ sperm/ml. Semen was cooled over a 6h period in water jacketed tubes from about 25 to 5$^{\circ}C$, Egg yolk-glycerol extender was added in one step at 5$^{\circ}C$. Semen was aspirated into 0.5ml straws, which were sealed with powder. Egg yolk-glycerol extender, which is used in Hanwoo sperm frozen and stored, semen from 13 Hanwoo bulls collected, the postthawed percentages of motile sperm were 65.7%. In semen characteristics of Hanwoo bulls, number of bulls volume are 5.7 ml and total cell count are 975${\times}$10$^{6}$ m1 ejaculate.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.