• Title/Summary/Keyword: 실험실데이터

Search Result 174, Processing Time 0.031 seconds

다기능 전자광학 카메라의 지상촬영을 통한 기능검증

  • Heo, Haeng-Pal;Yong, Sang-Sun
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.37 no.2
    • /
    • pp.231.2-231.2
    • /
    • 2012
  • 원격탐사를 위한 지구관측용 전자광학 카메라는 높은 해상도, 넓은 관측 폭 및 높은 선명도를 제공하기 위하여 부피가 크고 무거우며, 큰 전력을 소모하여, 위성본체의 대부분을 차지하도록 개발된다. 그러나, 달 탐사를 위해 달 궤도선이나 달 착륙선에 장착되는 전자광학 카메라는, 고해상도의 고성능을 가지도록 개발되기 보다는, 다기능의 집적도 높은 소형카메라로 개발되는 것이 일반적이다. 이에 따라, 달 탐사용 다기능 전자광학 카메라 개발을 위한 기술검증을 위하여 지상모델이 개발되었다. 본 카메라는 CMOS 센서를 사용하여 컴팩트하게 설계하였고, 스테레오 영상생성을 위해 두 개의 카메라가 동시에 운영되며, 줌 기능을 구현하여 다양한 조건에서도 영상획득이 가능하도록 설계 되었다. 또한 달 궤도선과 착륙선에서 1D 관측 및 2D 관측이 선택적으로 가능하도록 설계되었다. 개발된 지상모델은 실험실에서 수행하는 통상적인 기능 및 성능시험을 수행하였고, 스테레오 영상의 생성기능 등의 검증을 위하여 야외에서 카메라를 정속으로 회전하며 push broom 방식의 1D 촬영모드에 대한 시험을 수행한다. 또한, 항공촬영을 통해 1D 및 2D 촬영을 수행하여, 영상데이터의 처리 및 스테레오 영상데이터 생성 등의 검증 단계를 거친다. 본 논문 발표에서는 다기능의 전자광학 카메라를 지상에서 동작시켜 실제영상을 뽑아내고, 생성된 데이터를 처리하여, 설계된 카메라의 여러 가지 기능들에 대해 검증하는 방법들에 대해 정리 및 발표한다. 즉, 달 궤도에 맞게 설계된 카메라의 노출시간 등을 조절하고, push broom 방식을 모사하기 위하여 카메라를 정속으로 회전시켜 영상을 획득하여 다양한 카메라의 기능을 검증하였다.

  • PDF

Derivation of Radiometric Calibration Coefficients for KOMPSAT-3A Mid-wave Infrared Data Using a Radiative Transfer Model: An Exploratory Example (복사전달모델을 이용한 KOMPSAT-3A 중적외선 데이터의 복사보정계수 산출: 탐구적 사례)

  • Kim, Yongseung
    • Korean Journal of Remote Sensing
    • /
    • v.36 no.6_2
    • /
    • pp.1629-1634
    • /
    • 2020
  • It is essential to convert the Digital Number (DN) measured from Earth observing satellites into the physical parameter of radiance when deriving the geophysical parameter such as surface temperature in the satellite data processing. The purpose of this study is to update the DN·Radiance equation established from lab measurements, using the KOMPSAT-3A mid-wave infrared data and the MODTRAN radiative transfer model. Results of this study show that the improved DN·Radiance equation allows us to produce the realistic values of radiance. We expect in the forthcoming study that the radiances calculated as such should be more quantitatively validated with the use of relevant in-situ measurements and a radiative transfer model.

Forensic Analysis Technology of Smart phone backup data via synchronization (동기화 스마트폰 백업 데이터 포렌식 분석 기술)

  • Lee, Jae-Hyun;Park, Dea-Woo
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2011.10a
    • /
    • pp.287-290
    • /
    • 2011
  • The synchronization feature on the smartphone by default (default) value is set. Smartphone synchronization has been set is stored that smartphone data is automatically backed up is stored When connected to a PC with a smartphone dedicated cable. The backup data is a common technique to analyze the content to be difficult to apply forensic techniques can find out information on criminal suspects. In this paper, the backup data is synchronized to the smartphone through forensic analysis is the study of forensic evidence. In a lab environment to send personal financial information on smartphone, smartphone is assumed that the experiment is compromised. Smartphone's backup data by using the forensic tools in crime associated with personal financial information and analyze data. And, to be adopted by the court will study the evidence leveraging forensic technology. Through this paper as a basis for smartphone forensic analysis will be utilized.

  • PDF

A Study on the Estimation of Discharge in Unsteady Condition by Using the Entropy Concept (엔트로피 개념에 의한 부정류 유량 산정에 관한 연구)

  • Choo, Tai Ho;Chae, Soo Kwon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.12
    • /
    • pp.6159-6166
    • /
    • 2012
  • A discharge measurement is difficult in flood season which is especially important in the water resources field and the continuous discharge measurement for all rivers is impossible on the present system. So, the stage-discharge curve has been used for a long time to produce discharge data of rivers. However, there has been problems from a reliability angle due to the fact that this method uses only stage-discharge relationship, although the stage-discharge curve has the convenience. Therefore, a new mean velocity equation was derived by using Chiu's 2D velocity formula of the entropy concept in this paper. The derived equation reflected hydraulic characteristics such as the depth, gravity acceleration, hydraulic radius, energy slope, kinematic coefficient of viscosity, etc. and estimated also a maximum velocity. In addition, this method verified the relationship between a mean and maximum velocity and estimates an equilibrium state ${\phi}(M)$ well presenting properties of a river cross section as the results. The mean velocity was estimated by using the equilibrium state ${\phi}(M)$, and then the discharge was estimated. To prove this equation to be accurate, the comparison between the measured and estimated discharge is conducted by using the measured laboratory data in the unsteady condition flow showing loop state and the results are consistent. If this study is constantly carried out by using various laboratory and river data, this method will be widely utilized in water resources field.

ECG simulator design with Spartan-3 FPGA (Spartan-3 FPGA를 이용한 ECG 시뮬레이터 설계)

  • Woo, Sung-hee;Lee, Won-pyo;Ryu, Geun-teak
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2015.10a
    • /
    • pp.834-837
    • /
    • 2015
  • In this paper, we designed the FPGA hardware-based real-time ECG simulator, which generates an analog ECG signal within the range of 0 to 5 volts and described function. The ECG signal generated by the simulator can be applied to laboratory tests, the medical device, and the calibration study in various ways. ECG signals generated by simulator are obtained with conventional 24bit quantization to generate the signal data, and they are sampled and quantized to 1kHz of the 8-bit resolution when used as actual data. The proposed simulator is implemented using xilix Spartan-3 and data are transmitted through an RS-232 between the PC and the FPGA simulator. The transmitted data are stored in the memory and the stored data are printed out with the analog ECG signal through DAC (0808). It can also control the heart rate (HR) via the two buttons level UP-DOWN. We used existing ECG input rating for the evaluation of the designed system and evaluated differential circuit for obtaining QRS waveform and the output signal. We finally could obtained proper the result.

  • PDF

Experimental Study on Application of an Anomaly Detection Algorithm in Electric Current Datasets Generated from Marine Air Compressor with Time-series Features (시계열 특징을 갖는 선박용 공기 압축기 전류 데이터의 이상 탐지 알고리즘 적용 실험)

  • Lee, Jung-Hyung
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.27 no.1
    • /
    • pp.127-134
    • /
    • 2021
  • In this study, an anomaly detection (AD) algorithm was implemented to detect the failure of a marine air compressor. A lab-scale experiment was designed to produce fault datasets (time-series electric current measurements) for 10 failure modes of the air compressor. The results demonstrated that the temporal pattern of the datasets showed periodicity with a different period, depending on the failure mode. An AD model with a convolutional autoencoder was developed and trained based on a normal operation dataset. The reconstruction error was used as the threshold for AD. The reconstruction error was noted to be dependent on the AD model and hyperparameter tuning. The AD model was applied to the synthetic dataset, which comprised both normal and abnormal conditions of the air compressor for validation. The AD model exhibited good detection performance on anomalies showing periodicity but poor performance on anomalies resulting from subtle load changes in the motor.

Comparison of WiFi Protocols for Safety Communication Between Hydrogen Refueling Station and Fuel Cell Electric Vehicle (수소충전소와 수소전기차간의 안전통신을 위한 WiFi 프로토콜 비교)

  • Ha-Jin Hwang;Dong-Geon So;Do-Ho Cha;Hye-Jin Chae;Seo-Hee Jung;Sung-Ho Hwang
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.23 no.6
    • /
    • pp.81-87
    • /
    • 2023
  • SAE J2601 and SAE J2799, the communication protocols between a hydrogen refueling station and a fuel cell electric vehicle, only cover hydrogen charging. In this paper, we measure the hydrogen detection, current, and voltage of a fuel cell electric vehicle and transmit the sensor data to the hydrogen refueling station by changing the WiFi protocol. A small-scale laboratory model was built using Raspberry Pi for sensing, controlling, and transmitting sensor data of a fuel cell electric vehicle. The sensor data was stored in the database of the hydrogen refueling station, and a dashboard was configured using Grafana to analyze the stored data. When hydrogen is detected, the dispenser valve of the hydrogen refueling station is locked. Then, we measured the average transmission delay according to the WiFi protocol. The results showed that IEEE 802.11a is the most suitable WiFi protocol for transmitting sensor data between the hydrogen refueling station and the fuel cell electric vehicle.

Top-down Approach for User Abnormal Activity Detection Based on the Accelerometer (가속도 센서 기반 사용자 비정상 행동 검출 탑-다운 접근 방법 제안)

  • Lee, Min-Seok;Lim, Jong-Gwan;Kwon, Dong-Soo
    • 한국HCI학회:학술대회논문집
    • /
    • 2009.02a
    • /
    • pp.368-372
    • /
    • 2009
  • The method to get the feature have been proposed to recognize the user activity by setting specific action for making the user independent result in previous research. However, it was only applied in specific environment and it was difficult to implement because it regarded only some specific feature as the recognized object. To improve this problem we detected the normality/abnormality of the activity based on the repetition and the continuity of the past activity pattern. We applied the unsupervised learning method, not supervised, and clustered the data which was collected within a certain period of time and we regarded it as the basis of the evaluation of the repetition. We demonstrated to be able to detect the abnormal activity based on wether the data was generated repeatedly.

  • PDF

The comparison of Chiu's and Manning Velocity Equation Using Labor Date with Varied Channel Slope (하상경사가 변화는 실험실 데이터를 이용한 Chiu의 유속공식과 Manning 의 유속공식과의 비교분석)

  • Choo, Tai-Ho;Ok, Chi-Youl;Lee, Seoung-Kwan;Je, Sung-Jin
    • Proceedings of the KAIS Fall Conference
    • /
    • 2007.05a
    • /
    • pp.104-107
    • /
    • 2007
  • 현재까지 수리학 분야에서 가장 많이 회자되고 인용된 공식이 있다면 아마도 1800년에 발표한 Manning의 유속 공식이라고 해도 과언은 아닐 것이다. 그만큼 그 쓰임새가 많았을 뿐만 아니라 사용의 편리생과 정확도에서도 매우 우수하였기 때문일 것이다. 그러나, 아무리 우수한 공식이라도 약점이 있듯이, Manning의 유속공식 역시 조도계수n을 추정하는데 많은 어려움이 있는 것도 주지의 사실이다. 이러한 어려움을 극복하기 위하여, 본 연구에서는 확률통계에서 사용되는 엔트로피 개념을 이용한 3차원 유속분포식인 Chiu의 유속공식을 사용하였다. 그러나 지금까지 실증적으로 Chiu의 유속공식과 Manning땅의 유속공식을 비교분석하였던 논문은 Chiu와 Choo의 논문에서 일부 언급된 것 외 논문에서는 찾아볼 수 없는 것이 현실이다. 따라서 본 연구에서는 하상경사를 임의로 변경 가능한 실험수로를 선택하여 정밀법에 의한 유속측정을 우선 실시하였다. 같은 지점의 같은 단면에서 하상경사(${\Theta}$)가 0.000935부터 0.025794까지 28번의 경사변화를 주고 각 경사마다 유량을 측정하여 28개의 유량측정 데이터를, Chiu의 유속공식과 Manning의 유속공식에 각각 적용하여, Chiu의 M과 Manning의 n사이의 관계뿐만 아니라, 하상경사변화에 따른 관련인자들을 함께 분석하였으며, 실측된 평균유속과도 함께 분석하였다.

  • PDF

Judgment Decision, and Choice in Web Searching Behavior - Information Quality and Cognitive Authority - (웹 탐색과정에서 이용자들의 정보의 판단과 선택 -정보의 질 및 권위를 중심으로 -)

  • Rieh, Soo-Young
    • Journal of the Korean Society for Library and Information Science
    • /
    • v.36 no.2
    • /
    • pp.119-138
    • /
    • 2002
  • This study examines the effects of the judgment of information quality and cognitive authority on Web searching behavior. Sixteen scholars from diverse disciplines participated in the experiments, and the data were collected combining search logs, think-aloud during the searches, and post-search interviews in the laboratory setting. The results identified two distinct kinds of judgment, predictive judgment and evaluative judgment. The facets of judgment and criteria used for making Judgments of quality and authority were analyzed associated with the types of task, status of users, and discipline areas of users.