• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.10
• /
• pp.719-726
• /
• 2010

In this paper, the appropriate thermal storage time of an air-conditioning system with slab thermal storage was considered by use of summer measurement values. Two standards of heat extraction rate and criterion function were established as the standard that evaluates appropriateness. When heat extraction rate was a standard, zero hour and seven hours were obtained as appropriate thermal storage time, in the case of evaluation by energy consumption and running cost individually. Also, when criterion function was a standard, the difference between energy consumption and running cost was small, it was because the weight function to room air temperature deviation was much bigger than heat extraction rate.

• Geotechnical Engineering
• /
• v.3 no.4
• /
• pp.7-20
• /
• 1987

This study was performed to investigate the effect of time-dependent creep on the deformation analysis of multi-dimensional consolidation using the finite element method for young Sedimentary clay. It was assumed that the creep in the clay had occured during consolidation. In the analysis, the Modified cam-clay theory originated from the critical state theory was used as the constitutive equation, in which a term equivalent to the creep was supplemnted. The results of the analysis were in good agreement with the observed values in the field.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.755-762
• /
• 2023

The reliability of measuring instruments is essential in measuring cosmic radiation. To demonstrate this importance, this study measured and compared the amount of cosmic radiation using Liulin and TEPC, operated in South Korea, on a flight between Incheon, South Korea and LA, the US. In addition, since prior analysis based on a prediction program is necessary in advance to check the dose of cosmic radiation, this study utilized KREAM developed in Korea and the CARI-6M developed by the FAA to acquire the predicted value. As a result of the verification, the reliability of the two devices falls within the acceptable level of 20%, proving the reliability. Moreover, the differences between the values acquired by each prediction program were only subtle. Nevertheless, the analysis demonstrated that the prediction value obtained by the programs and the measured value had significant differences. Therefore, additional correction of the discrepancies or continuous research for such is required to match the predicted values are similar to the actual measured values.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4700-4705
• /
• 2013

The purpose of this study is to investigate the usability and user interface in different types of smart phones. KLM(key-stroke-level model) model estimation and observation values were calculated to perform 12 functional factors in 3 different groups. In results, it was found that the usability of smart phones are similar in basic and general functions. On the contrary, the usability of smart phones are different in more complex functions. Current results can be used to anticipate the future effort to improve user interface design in smart phone.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.2
• /
• pp.23-32
• /
• 2001

A soil wall reinforced by soil nailing is excavated in the typical soil conditions which are consisted of weathered soil, weathered rock and soft rock. The resulting nail loads computed are compared to loads measured by utilizing strain gauges during construction. The wall deflection at two locations are related to construction events and specific soil conditions, providing an understanding of the behavior of soil nailed walls. The load distribution along the nail indicated relatively high loads close to the wall. The mobilized load on the nail is proportional to the wall deflection showing the maximum value at the surface of the wall. The construction monitoring for this project provided valuable information in understanding the behavior of soil nailed walls.

• Geotechnical Engineering
• /
• v.3 no.3
• /
• pp.21-30
• /
• 1987

Some methods are presented to estimate the ultimate lateral resistance of single active piles subjected to lateral loads above the ground surface, considering the lateral soil reaction, the pile length and the fixity condition of a pile head. The lateral soil reaction acting on a single active pile embedded in soil due to pile movement can be estimated by use of a theoretical equation which is derived by considering especially the plastic state of ground surrounding the pile and the pile- section shape. The piles are named short or long depending upon the relative magnitude of the induced bending moment to the yielding moment. As for the fixity condition of a pile head, the free head and the unrotated head are considered. Comparison with other experimental results gives that the calculated ultimate lateral resistance obtained by the author's theory is closer to experimental results than the one obtained by Brom's theory.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1264-1270
• /
• 2006

In this study, semi-two dimension numerical model(GSTARS 2.1 model) were applied to study on the hydraulic and sedimentologic characteristics of downstream channel section in Dal stream. GSTARS 2.1 model was applied for the four selected sediment transport formulas(Meyer-Peter and Muller, Acker and White's, Engelund and Hanson, Yang formula) from 1984 to 1992 measured data on each section. The simulation results of Meyer-Peter and Muller formula for long-term bed changes are good when compared to the measured data. When quantitatively compared, it appears that the results data is relatively underestimated compared to the 1992 measured data on each section. Using Meyer-Peter and Muller formula, analyse the effects of bed changes by stream tube number.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.05a
• /
• pp.313-314
• /
• 2008

• Proceedings of the Korea Water Resources Association Conference
• /
• 1996.05a
• /
• pp.167-172
• /
• 1996

• Journal of Korea Water Resources Association
• /
• v.51 no.2
• /
• pp.151-163
• /
• 2018

The objective of this study was to estimate LOADEST (LOAD Estimator) coefficients for simulating pollutant loads in ungauged watersheds. Regression models of LOADEST were used to simulate pollutant loads, and the multiple linear regression (MLR) was used for coefficients estimation on watershed characteristics. The fifth and third model of LOADEST were selected to simulate T-N (Total-Nitrogen) and T-P (Total-Phosphorous) loads, respectively. The results and statistics indicated that regression models based on LOADEST simulated pollutant loads reasonably and model coefficients were reliable. However, the results also indicated that LOADEST underestimated pollutant loads and had a bias. For this reason, simulated loads were corrected the bias by a quantile mapping method in this study. Corrected loads indicated that the bias correction was effective. Using multiple regression analysis, a coefficient estimation methods according to the watershed characteristic were developed. Coefficients which calculated by MLR were used in models. The simulated result and statistics indicated that MLR estimated the model coefficients reasonably. Regression models developed in this study would help simulate pollutant loads for ungauged watersheds and be a screen model for policy decision.