• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.3
• /
• pp.199-205
• /
• 2013

In this study, the methodology for the fatigue life prediction using finite element method(FEM) in wire, bundle and assembly level of the wire harness system and the development of the fatigue life test machine for the numerical analysis are investigated. To obtain stress-life(S-N) histories of the componential wires of the system, five kinds of wires are prepared and applied to the repeated bending motion using developed fatigue life test equipment. Equivalent model of the wire from the rule of mixtures theory is used for the material modeling of sheath and wire core combination. Contact conditions among the wires, taping conditions are established through the bundle level test and numerical bundle analysis. Wire and bundle level results are adopted for the assembly level analysis. For the assembly level analysis, real wire harness system including bundle and grommet is numerically modeled and applied contact condition between wires with real opening motion. The fatigue life more than 700,000 cycles of the assembly is obtained from the FEM, and it is confirmed that the result has good agreement with the experimental result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.64-68
• /
• 1998

본 연구의 목적은 수도권 지하철차량의 소음과 진동에 방음차륜(또는 탄성차륜)이 어느 정도의 효과를 가져오는가를 평가하기 위한 것이다. 실차시험을 통하여 일체차륜이 장착된 차량과 방음차륜이 장착된 차량의 차내소음 및 차체진동을 비교하여 보았다. 그 결과 방음차륜은 지하철차량의 소음과 진동에 효과가 있음을 알 수 있었다. 그러나 실제 적용은 소음과 진동 이외에도 여러 가지 측면에서의 검토가 이루어져야만 가능할 것이다.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2373-2375
• /
• 2002

전자 제어식 미끄럼 방지 제동 장치(ABS, Anti-lock Brake System)를 장착한 차량의 실차 제동 시험은 시험용 차량을 비롯하여, 많은 분석장비를 필요로 한다. 이러한 고가의 장비는 구하기가 어려울 뿐만 아니라 사용방법을 학습하는 데에도 상당한 기간을 필요로 하므로, 개발중인 ABS에 대하여 적용해 보기에는 그 사용에 제약을 받는다. 본 논문에서는 개발중인 미끄럼방지 제동 알고리즘과 전자제어장치(ECU, Electronic Control Unit)를 대형 버스에 장착하여, 저 점착 노면에서 주행 시험을 시행하였고, 그 주행 기록의 분석을 위하여 DAS(Data Acquisition System)를 구현하였다. 개발 ABS 알고리즘 및 ECU의 기능과 성능 검증이 목적인 DAS는 부가적인 센서 및 고가의 장비를 사용하지 않고 제어보드와 휴대용 노트북 컴퓨터를 이용하였다. 고정밀도의 자료를 획득할 수는 없었지만, 개발 DAS를 이용한 차량 실차 제동 시험은 경제적이면서도 효과적인 ECU 및 알고리즘의 성능 분석을 이룰 수 있었다. 특히 개발 DAS는 제어 및 Data Acquisition을 동일한 보드를 사용하여 구현함으로써, ABS 장착 실차 주행 시험 결과를 제어알고리즘에 즉각적으로 반영시킨 수 있었다. 이러한 One Board System 및 On-Vehicle Programming을 이용한 방법은 개발 알고리즘의 빠른 Debugging 및 파라미터 조정(Tuning)을 가능하게 하였으므로, 실차 제동 시험을 위한 한정된 기간 내에 개발 ABS ECU 및 제어 알고리즘의 성능을 효과적으로 검증할 수 있었다.

• The tire
• /
• s.122
• /
• pp.32-38
• /
• 1986

타이어는 승용차를 비롯한 각종차량이나 항공기 등의 중요부품으로서 실로 광범위한 기능을 다하고 있는 것이다. 타이어는 무엇보다도 안전주행을 할 수 있어야 하고 자동차를 사용하는데 있어서의 경제성도 고려되어야 한다. 그리고 특히 승용차인 경우에는 차의 조종ㆍ안정성이나 진동ㆍ승차감ㆍ소음 등의 각종 요구에도 만족되어야 한다. 따라서 타이어가 이와같은 각종 요구조건을 만족시키고 있는가를 알기 위해서는 여러가지 시험을 통해서 평가하지 않으면 안된다. 또한 당연한 일이겠지만 이와같은 결과는 타이어 개발에 많이 활용되어야만 될 것이다. 타이어의 역할은 차량에 낀 다음부터 나타나게 되므로 타이어의 최종적인 평가는 실차시험에 따르는 것이 가장 좋으나, 시험의 능률, 경제성, 정밀도, 재현성 등의 여러가지 문제가 있기 때문에 실내시험으로 대체할 수 있는 제특성에 대해서는 가능한 한 여러가지의 실내시험기로 측정하는 방법을 택하고 있다. 그러나 자동차와의 조화로 나타나는 조종안정성이나 진동ㆍ소음: 승차감 등에 대해서는 실차시험으로 최종적인 평가ㆍ판정을 하는 수 밖에 없으므로 현재 세계의 많은 타이어 메이커들은 타이어 테스트코스를 설치하여 많은 시험차를 가지고 시험하고 있다. 따라서 여기서는 타이어의 시험이 어떠한 방법으로 이루어지고 있는지를 살펴보고자 한다.

• The tire
• /
• s.38
• /
• pp.5-6
• /
• 1972

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.57-64
• /
• 2020

The leading technologies of the ADAS (Advanced Driver Assist System) are ACC (Advanced Cruise Control), LKAS (Lane Keeping Assist System), and AEB (Autonomous Emergency Braking). LKAS is a system that uses cameras and infrared sensors to control steering and return to its running lane in the event of unintentional deviations. The actual test is performed for a safety evaluation and verification of the system. On the other hand, research on the system evaluation method is insufficient when an additional steering angle is applied. In this study, a model using Prescan was developed and simulated for the scenarios proposed in the preceding study. Comparative analyses of the simulation and the actual test were performed. As a result, the modeling validity was verified. A difference between the front wheels and the lane occurred due to the return velocity. The results revealed a maximum error of 0.56 m. The error occurred because the lateral velocity of the car was relatively small. On the other hand, the distance from wheels to the lanes displayed a tendency of approximately 0.5 m. This can be verified reliably.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.266-275
• /
• 2008

The performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle has been focused so far. However, for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module and vehicle level. The test procedure to evaluate vibration and collision safety of high pressure hydrogen storage system for the fuel cell vehicle is established and its reliability is verified.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.141-158
• /
• 2022

Currently, there are some aptitude test systems for older drivers in Korea. However, there are no methods and systems to evaluate the real driving ability for older drivers based on filed driving test. This study was conducted to investigate the availability to use the driving course test used for driving license for identifying difference in driving ability of older and non-older drivers. For the research purpose, filed experiments were conducted using the real driving course test site and evaluation times used in the field. In particular, driving behavior data that obtained from the experiments for two driver groups, older and non-older drivers, were analyzed and compared. From several statistical analyses of driving ability and vision and cognitive ability, it was found that the currently used driving course test site and evaluation times were not appropriated to identify driving ability deficiency of older drivers. To solve the problem, this study developed five evaluation items to identify driving ability deficiency of older drivers using the currently used driving course test site. It was also found that the developed five evaluation items have statistically significant correlation with vision and cognitive ability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.555-560
• /
• 2018

In this paper, we focus on the study of educational contents using real vehicle based electric vehicle diagnosis system. To understand the electric vehicle, we describe the driving modes and operating principles of the core components and electric vehicles that make up the electric vehicles. In addition, we implemented a diagnostic system for analyzing the characteristics of the electric vehicle test bed and analyzed the characteristics of the vehicle based on the driving mode.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.705-710
• /
• 2012

In this study, an experiment on an air conditioning test bench was performed to verify the possibility of fuel economy simulation for the SC03 mode, North America fuel economy certification mode with a/c on condition, one of the vehicle fuel economy evaluation modes. The air conditioning test bench used in this study had each chamber simulating the actual vehicle air conditioning system and the controlling temperature, humidity, and air flow velocity to reproduce environmental conditions. Reliable results were obtained about the compressor RPM and inlet air velocity in front of the condenser corresponding to vehicle speed and air velocity in front of the vehicle, respectively, in the simulation of the SC03 mode, previously performed in CWT, in an air conditioning test bench. It was also discovered that there was a distinct difference in the fuel economy depending on the difference in the compressor displacement in the simulation test of the SC03 mode in the air conditioning test bench under various displacement conditions of the compressor.