• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.611-612
• /
• 2012

친환경자동차의 고전압시스템에 대한 인체 감전 사고 예방을 위한 전기안전 평가요소는 절연성능 평가이다. 고전압시스템을 사용하는 자동차의 절연성능은 $100{\Omega}/Vdc$, $500{\Omega}/Vac$ 이상으로 규정하고 있으며, 평가방법은 UNECE WP.29의 GTR 등에서 여러 가지 방법을 제시하고 있지만, 실차에 대한 측정을 통하여 몇 가지 문제점이 도출되었다. 본 연구에서는 실차상태의 절연성능 평가의 문제점 분석을 통하여 In Use 상태와 Post Crash 상태의 실차에 대한 절연성능 평가 방법을 제시하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.143-147
• /
• 2017

In this study, a driving load measuring method has developed without utilizing WFT. To measure the driving load, we developed a three-axis load cell with a strain gage. A method to verify the performance of load cells was developed. A system to measure the input load was proposed, and it was verified by evaluation. The measurement error of the impact road surface was found to be less than 20％. However, except under impact road surface conditions, the proposed system can be applied for actual vehicle input load measurement. The influence of tire evaluation tests were carried out through the handling verification evaluation. The input load measurement methods proposed in the present study make performance verification possible without using WFT.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.486-487
• /
• 2009

Recently active engine mounting system is developed for improvement of vehicle NVH Problem which is caused by development of high efficient powertrain and lightweight vehicle body. The aims in the development of active engine mounting system is performance confirmation of vehicle to apply active engine mount. In this paper, NVH test was done on test vehicle including active engine mount. And performance of active engine mount is evaluated by controlling active engine mount.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.295-301
• /
• 1997

본 연구의 목적은 수도권 전동차량의 주행성능을 평가하는 방법으로 진동성능을 비교검토하기 위하여 실차측정하고 분석한 것이다. 전동차량의 제작년도별로 측정대상차량을 샘플링하여 다양한 조건에서 진동을 측정하고 실측데이타를 시간영역의 통계적 방법으로 분석한 결과 제작년도에 따른 영향도 약간 나타났으며 전동차량의 2차 현가장치의 종류에 따른 영향을 발견할 수 있었다. 또한 측정선로구간의 특성에 따른 영향도 비교적 잘 나타나고 있음을 알 수 있었다.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.304-313
• /
• 2016

It is necessary to receive telegrams transmitted by transponder tags installed along the track in order to detect the exact position of a high-speed train. In a high-speed railway environment, telegrams can be corrupted by the electromagnetic interference that comes from onboard electric train power equipment or wayside devices. In this study, we verified the railway environment compatibility of a high-speed transponder system developed as a train position detection system. We installed transponder tags on the Honam high-speed line and measured the number of error-free telegrams received from the transponder tag while the HEMU-430X was running at 268km/h~334km/h. Based on the measurement, we estimated the length of the contact zone formed between the transponder reader and tag. Field test results allow us to estimate how many error-free telegrams can be received when HEMU-430X is at speeds up to 400km/h.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.561-562
• /
• 2009

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.347-354
• /
• 2000

This paper presents performance characteristics of a semi-active suspension featuring continuously variable ER (electro-rheological) dampers. These are evaluated through the field test of a passeng er car. Four ER dampers (two for front and two for rear part) are manufactured and their field-dependent damping properties are experimentally investigated. The damping force responses to step input fields are also identified by employing small size of high voltage amplifiers which are made adaptable to the field test. A skyhook controller considering the vertical, pitch and roll motions is formulated and incorporated with a car to be tested. The field test is then undertaken in order to evaluate both comfortability and steering stability showing bump, dive and squat responses.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1421-1426
• /
• 2012

Cornering maneuvers with reduced body roll and without comfort loss are important requirements for car manufacturers. An electric active roll control(ARC) system controls the body roll angle by using motor-driven actuators installed at the centers of the front and rear stabilizer bars. Co-simulation using the Matlab/Simulink controller model and the CarSim vehicle model was proposed to evaluate the performance of the ARC control algorithm. To validate the performance of the ARC actuator and system, bench tests and vehicle tests were proposed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1436-1445
• /
• 1990

Performance of vehicles depends mainly on engine performance, transmission gear ration and shifting pattern. In this paper, determination method of gear ratios and shifting pattern for automatic transmission equipped vehicles has been proposed. Computer programs for gear ratio determination and shifting pattern decision using optimal design technique have been developed for the purpose of increasing vehicle acceleration performance. For preceding study, computer simulation of vehicle performance is carried out using numerical technique.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.11-18
• /
• 2011

In this study, the performance of a steel-FRP composite bridge safety barrier was evaluated through vehicle crash simulation. Surface veil, DB and Roving fibers were used for FRP. The MAT58 material model provided by LS-DYNA software was used to model FRP material. Spot weld option was used for modeling contact between steel and FRP beam. The structural strength performance, the passenger protection performance, and the vehicle behavior after crash were evaluated corresponding to the vehicle crash manual. As the result, A steel-FRP composite safety barrier was satisfied with the required performance.