• Proceedings of the Korean Society for the Gifted Conference
• /
• 2003.11a
• /
• pp.185-186
• /
• 2003

영재교육 프로그램 개발의 핵심적인 부분은 영재들에게 적절한 교육과정이며, 대표적인 영재교육과정모형으로 삼부심화학습모형(Enrichment Triad Model: ETM), 학교단위 심화학습모형(Schoolwide Enrichment Model： SEM), 자기주도적 학습모형 (Self-Directed Learning Model), 퍼듀 3단계 심화학습 모형(Purdue Three-Stage Enrichment Model) 등이 있다. 이들 모형에 대한 적용 연구가 일부 초등학교냐 중학교의 시범적인 속진 및 심화 프로그램 실시로 적용된 바는 있으나 정규 교육과정에서는 실시될 기회가 없었다. 국내에서도 2002년 영재교육법 시행령 적용 이후 과학영재학교가 지정되어 운영되고 있기에, 영재교육을 위한 모형을 정규 교육과정 및 교수-학습 과정에 적용하고 그 효과를 밝히는 연구가 필요하다. 이에 본 연구에서는 삼부심화학습모형을 적용하기 위한 구체적인 교수·학습 과정안을 개발하고, 이를 과학영재학교 물리수업에 적용하여 그 과정과 학생들의 인식을 분석하고자 한다. 본 연구의 대상은 과학영재고등학교 1학년 72명이며 검사결과 지능지수, 추리력, 수리력, 지각력 면에서 매우 우수한 집단으로 나타났다. 삼부심화학습모형을 실시한 기간은, 1단계 활동을 2주간 실시하였고, 2단계 활동은 4개월간 진행하고 있으며, 3단계 활동은 겨울방학을 이용하여 실시할 계획이다. 삼부심화학습모형에 의하면 1단계는‘일반 탐색 활동을 통한 심화 학습’단계로 정규 교육과정 속에 포함되어 있지 않은 새롭고, 흥미로운 주제나 지식 영역들에 학생들이 접할 수 있도록 설계된 일반적 탐구 혹은 탐색 경험들을 제공하는 것으로 구성된다. 점수를 종속변인으로 하여 회귀분석을 한 결과 TTCT 도형과 언어 검사 모두 WAIS 소검사중의 기본지식문제가 TTCT 전체점수에 가장 높은 영향력을 미쳤다. 지능이 높은 그룹과 낮은 그룹에 대해 WAIS 11개 소검사와 TTCT 전체점수와의 상관을 구한 결과, 지능이 높은 그룹에서는 유의미한 상관을 의미는 소검사가 거의 없었던 것과는 달리, 지능이 낮은 그룹에서는 결정성지능을 대표하는 소 검사와 TTCT 도형검사 점수간의 상관이 유의미하게 나타났다. 이상의 결과를 통해 TTCT는 도형과 언어 검사 모두 유동성지능 보다는 결정성지능과 상관이 있음을 알 수 있는데, 이는 창의력 검사가 문제 해결 상황에 기존의 지식을 이용하는 능력을 측정하고 있기 때문으로 추정된다. 또한 지능이 낮은 그룹에서 높은 그룹에 비해 창의력 검사와 지능 검사 사이의 상관의 정도가 높았는데, 이는 일정 수준까지는 창의적 능력이 결정성 지능에 의해 제한을 받으나 일정 수준 이상의 결정성 지능을 갖게 되면 더 이상 결정성 지능이 창의적 능력을 제한하지 않기 때문인 것으로 해석된다.circ}C$에서 2.5~8.2mg$CO_2$/kg.hr로 일반적으로 보고되고 있는 토마토 호흡속도와 일치하는 결과를 나타내었다.다.환원당인 sucrose 함량은 계속 증가하였고 fructose, glucose, sorbitol의 함량(추황의 sorbitol을 제외)은 생장이 촉진됨에 따라 증가하다가 다시 점차적으로 감소하였다. 이러한 결과는 총당과 환원당의 측정결과와 일치한 것으로 나타났다. 결론적으로 배의 성장에 따라 산 함량은 감소하였고 당 함량은 증가하였다.luco-pyranoside, quercetin 7-O

• Journal of the korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.98-103
• /
• 2002

이제 카트 정렬과 휠 셋업에 필요한 최적의 변수들을 알아보았다. 실제 세팅은 위에서 언급한 내용 이외에도 많은 것들을 고려하여야 한다. 타이어 접지력의 세팅은 경기장, 날씨, 제품의 불 균일성 등을 고려하여 야 한다. 즉, 어떤 경기장은 코너의 반경이 다른 경기 장 보다 크며 어떤 경기장은 코너가 매우 많기도 하여 세팅을 상황에 맞게 하여야 하는 것이다. 각각의 변수를 세팅할 경우는 중간 값을 취하는 것이 바람직하여 이 중간 값을 취하는 것이 바람직하며 이 중간 값을 각각의 경기장의 특성에 맞추어 변화시키면 되는 것이다. 예를 들면, 접지력이 작게 발생되는 경기장(혹은 매우 추운날씨) 에서는 캐스터를 코기 하여 초기 회전 발생이 용이하게 할 수도 있다. 또한 토우인 값을 크게 하여 타이어가 마찰을 더욱 많이 발생하여 타이어의 온도가 급격히 상승하여 원하는 접지력의 수준에 용이하게 도달할 수 있게 하는 것이다. 그러나 이러한 세팅은 다른 핸들링 문제를 야기할 수 있다는 것을 이해하여야 하며 이러한 문제를 해결하는 또 다른 노력이 필요하게 되는 것이다. 가장 중요한 것은 후륜 내측으로부터는 조종 성능을 향상시키는데 필요한 접지력을 거의 기대하지 못한다는 것이며 마찰이 적게 발생하여 손쉽게 동력 손실을 초래하고 있다는 것이다. 그러므로 회전을 할 경우에도 속도를 낮추어서는 안되며 이렇게 하이야 핸들링이 매우 용이하게 되는 것이다. 그러나 위의 설명에서도 보았듯이 일부 세팅을 변경하면 여러 곳이 그 효과가 나타난다. 예를 들어 후륜의 간격을 변화시키면 카트에서 무게이동 뿐만 아니라 회전 시에 가속이나 감속에 의한 회전 토크의 효과도 달라지게 된다. 특정한 세팅의 변화가 어떻게 작용할 것이라는 확신을 가지고 있다고 할지라도 세팅에서 가장 중요한 것은 주행 기록이다. 여기서 설명되어진 많은 내용이 주행 기록을 향상시키기를 바라는 바이다.간이 육색과 총육색소 함량에는 영향을 미치지 않는 것으로 나타났다. 관능적 특성평가 중 육색과 육즙참출은 대조구와 비교하여 CLA급여 처리구가 유의적인 차이가 없었으나, 근내지방 축적 정도와 전체적인 기호성은 대조구에 비하여 CLA 급여 처리구가 유의적으로 높은 평가를 받았다(p<0.05). 간격은 술 후 1년 후까지도 지속적으로 감소하는 경향을 보였다. 따라서 이 기간동안에는 추적관찰이 필요한 것으로 생각된다.경미하게 나타났으며, 이는 2% 흥국 첨가식이의 섭취로 인한 bromobenzene 대사 및 유해산소 해독의 촉진에 기인되기 때문일 것으로 생각된다.다.과 및 지질과산화억제효과의 순과 일치하였다. 총 flavonoid 함량은 DPPH 라디칼 제거효과에 대한 $IC_{50}$/ 값과 높은 상관관계(r=-0.9924, p<0.01)를 나타내었다.이 우수한 심근보호 효과를 나타내나, 허혈시간이 2시간을 초과하면 심근의 혈역학적 기능과 미세구조의 변화는 중등도의 저온(22∼24$^{\circ}C$)에서 유의하게 악화되었다. 이 같은 결과로 볼 때 심근 허혈시간이 2시간을 초과한다면 심근 온도를 낮추어야 할 것으로 판단된다. 7.2, with 64.0% of office workers having an average level between 6- and 9. The degree of stress was higher for females than males, for unmarried salaried and hot-tempered persons. Those not doing exercise were subject to the highest levels of stress, and those a having sufficient sleep were found to be subject to less stress.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.31-41
• /
• 1997

This paper describes a potential-based panel method formulated for the prediction of the steady performance of a waterjet propulsor. The method employs normal dipoles and sources distributed on the solid surfaces such as the impeller/stator blades, hub and duct, and normal dipoles in the shed wakes trailing the impeller and stator to represent the potential flow around the waterjet propulsor. To define a closed boundary surface, the inlet and outlet open boundary surfaces are introduced where the sources and dipoles are distributed. The kinematic boundary condition on the solid boundary surface is satisfied by requiring that the normal component of the total velocity should vanish. On the inlet surface, the total inflow flux into the duct is specified, and on the outlet surface the conservation of mass principle is applied to evaluate the source strength. The solid surfaces are discretized into a set of quadrilateral panel elements and the strengths of sources and dipoles are assumed constant at each panel. Applying this approximation to the boundary conditions leads to a set of simultaneous equations. Systematic numerical tests show that the present numerical method is fast and stable. In order to validate the present method, sample computations are carried out first for the case of a conventional axial flow fan which has a similar geometry as the waterjet propulsor, and then for the case of a waterjet propulsor on which experiments are carried out at KRISO(Korea Research Institute of Ships and Ocean Engineering).

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.313-326
• /
• 2018

This paper introduces core techniques on ship detection and tracking based on a compact HF radar platform which is necessary to establish a wide-area surveillance network. Currently, most HF radar sites are primarily optimized for observing sea surface radial velocities and bearings. Therefore, many ship detection systems are vulnerable to error sources such as environmental noise and clutter when they are applied to these practical surface current observation purpose systems. In addition, due to Korea's geographical features, only compact HF radars which generates non-uniform antenna response and has no information on target information are applicable. The ship detection and tracking techniques discussed in this paper considers these practical conditions and were evaluated by real data collected from the Yellow Sea, Korea. The proposed method is composed of two parts. In the first part, ship detection, a constant false alarm rate based detector was applied and was enhanced by a PCA subspace decomposition method which reduces noise. To merge multiple detections originated from a single target due to the Doppler effect during long CPIs, a clustering method was applied. Finally, data association framework eliminates false detections by considering ship maneuvering over time. According to evaluation results, it is claimed that the proposed method produces satisfactory results within certain ranges.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.39-46
• /
• 2011

Speeding is a major cause of traffic accidents that affects the safety of pedestrians and harms drivers and their families, property and mental health. However, most researches on speeding behavior have been conducted by survey method, so the relationship between cause and effect is not clear. The reliability of the research cannot be carefully examined because most researches involve retrospective methods. It is clear that conducting experimental research is important for overcoming these limitations, but it is impossible to perform tests with real cars in real traffic situations due to the inability to control situational factors (e.g., other vehicles, traffic signal) which affect participants' behavior. A car simulator experiment was designed and the theory of planned behavior was applied to the experiment. Each participant was grouped and assigned to either high speeding intention group or low speeding intention group according to their levels of speeding intention and analyzed the difference of driving behavior indexes between two groups. The results revealed statistically significant differences between two groups on driving speed, speeding frequency, and accelerator pressure deviation. Finally, the limitations and the implications of this study were discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1349-1354
• /
• 2013

Sealing structure to prevent flowing hot gas into the driving device, located between the driving shaft and the liner of On-Off valve for controlling the hot gas flow path was studied. Wear occurs due to the constant movement of the driving shaft controlled by actuator on graphite as the sealing material. In this paper, the dynamic wear behavior in high temperature of graphite(HK-6) to be used as sealing material was evaluated. Reciprocating wear test was carried out for the graphite(HK-6) to the relative motion between shaft materials(W-25Re). The results of friction coefficient and specific wear rate according to contact load, sliding speed at room temperature and $485^{\circ}C$ considering the actual operating environment were evaluated. Through the SEM analysis of the worn surface, third body as lubricant films were observed and lubricant effect of third body was considered.

• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.93-100
• /
• 2011

This study was conducted to verify the applicability of robot milking system through acquisition and analysis of model teat's position information using scanning range finder (SRF). Model teats, same size and shape as real teats, were designed to analyze the properties according to the material, distance error and angle error of the sensor. In addition, 2-dimensional distance information of each teats was obtained at same time with 4 teat models and the result were as follows. 1. In the case of the fingers on the experiment for selection of materials for teat model, the distance error was from 4.3 mm to 1.3 mm, average was 2.8 mm as a minimum record. In the case of rubber material, average distance error was 4.3 mm. So, this material was considered to be a most suitable model. 2. The distance error was maximum at 100 mm distance. The more distance increased, the less error increased up to 300 mm. Then the error increased after 300 mm and decreased again. 3. The maximum angle error of 10.1 mm was measured at $170^{\circ}$, in case of $70^{\circ}$ the error was 0.2 mm as a minimum value. There was no specific tendency to error of angle. 4. In the 2-dimensional location error for 4 teat models, distance error was 3.8 mm as minimum and 7.2 mm as maximum. The angle error was $1.2^{\circ}$ as maximum. All of errors were included within the accuracy of sensor, the robot milking system was considered to be applicable to measure the distance of teats due to the measuring velocity of SRF and the hole size of teat-cup.

• Korean Journal of Food Science and Technology
• /
• v.46 no.2
• /
• pp.121-126
• /
• 2014

Recently, infant formula products made of caprine milk have gained popularity, mainly because the nutritional composition of caprine milk is similar to that of human milk. In addition, caprine milk is considered to be better than bovine milk in terms of nutrient composition and easier digestion. Compared to bovine milk, caprine milk contains more ${\beta}$-casein, but less ${\alpha}$S1-casein. While the lactose concentration of both bovine and caprine milk is almost the same, a content of total oligosaccharides in caprine milk was approximately five to eight times higher than that in bovine milk. However, as the dairy goat industry in Korea is in a nascent stage of milk production and further processing, many nutritional advantages of caprine milk over bovine milk are not fully conveyed to general consumers. It is recommended that scientific research regarding the nutritional benefits of caprine milk needs to be conducted urgently, owing to the increasing domestic sales of infant formula products made of caprine milk.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.134-145
• /
• 2004

With rapid growth in the amount of data transferred on the Internet, traditional storage systems have reached the limits of their capacity and performance. SAN (Storage Area Network), which connects hosts to disk with the Fibre Channel switches, provides one of the powerful solutions to scale the data storage and servers. In this environment, the maintenance of data consistency among hosts is an important issue because multiple hosts share the files on disks attached to the SAN. To preserve data consistency, each host can execute the disk I/O whenever disk read and write operations are requested. However, frequent disk I/O requests cause the deterioration of the overall performance of a SAN cluster. In this paper, we introduce a SANtopia global buffer manager to improve the performance of a SAN cluster reducing the number of disk I/Os. We describe the design and algorithms of the SANtopia global buffer manager, which provides a buffer cache sharing mechanism among the hosts in the SAN cluster. Micro-benchmark results to measure the performance of block I/O operations show that the global buffer manager achieves speed-up by the factor of 1.8-12.8 compared with the existing method using disk I/O operations. Also, File system micro-benchmark results show that SANtopia file system with the global buffer manager improves performance by the factor of 1.06 in case of directories and 1.14 in case of files compared with the file system without a global buffer manager.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.679-691
• /
• 2002

Volume visualization is an important subarea of scientific visualization, and is concerned with techniques that are effectively used in generating meaningful and visual information from abstract and complex volume datasets, defined in three- or higher-dimensional space. It has been increasingly important in various fields including meteorology, medical science, and computational fluid dynamics, and so on. On the other hand, virtual reality is a research field focusing on various techniques that aid gaining experiences in virtual worlds with visual, auditory and tactile senses. In this paper, we have developed a visualization system for CAVE, an immersive 3D virtual environment system, which generates stereoscopic images from huge human volume datasets in real-time using an improved volume visualization technique. In order to complement the 3D texture-mapping based volume rendering methods, that easily slow down as data sizes increase, our system utilizes an image-based rendering technique to guarantee real-time performance. The system has been designed to offer a variety of user interface functionality for effective visualization. In this article, we present detailed description on our real-time stereoscopic visualization system, and show how the Visible Korean Human dataset is effectively visualized on CAVE.