• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.188-197
• /
• 2007

Active flow control, in the form of steady and unsteady momentum injection via jet blowing was studied. A jet was obtained by pressing a plenum inside the airfoil and ejecting flow out of a thin slot. The normal and drag forces were measured with leading edge or trailing edge blowing Jet and compared with the results obtained with no blowing. The blowing jet has been shown to improve the aerodynamic performance of the airfoil. The steady jet proved more effective than pulsating jet in these experimental conditions. Furthermore for the case of leading edge steady blowing jet, the alleviation of non-linearity in the normal force curve slope can be seen at higher angles of attack. No effective trailing edge jet was observed in this highly separated flow. This shows that the stall control is highly depends on the characteristics of the boundary layer near the jet slot.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.373-375
• /
• 2003

상반회전 풍력발전 시스템의 경우 전방에 위치한 로터의 후류 효과를 적절히 반영하여 설계에 이용해야 한다. 본 연구에서는 이러한 로터의 후류효과 및 블레이드의 실속후 모델을 고려하여 30kW급 상반회전시스템의 설계형상에 대한 검토연구를 수행하였다 기본공력이론은 모멘텀 이론과 2차원 준정상 공기력 이론을 통합한 형태를 사용하였다. 로터의 후류영향을 고려하기 위해 축소형 풍차 블레이드 모델에 대한 풍동시험 결과를 적절히 이용하며, 이로부터 보조로터를 지난 후류의 축속도 및 각속도 성분을 결정하였다. 최종적으로 상반회전 시스템의 로터 반경 및 상호 이격거리 등을 고려한 성능해석을 수행하고 이로부터 최적 설계형상에 대한 파라미터 연구결과를 제시하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.8
• /
• pp.726-736
• /
• 2012

This paper deals with Spin/Stall Recovery Parachute System from design to ground taxiing stage which would be deployed on the high speed taxi of turbo-prop airplane. In detail design phase, design parameters- riser length, parachute type, size, porosity, parachute canopy filling time, and deployment method- were considered based on the analytical disciplines such as aerodynamics, structures, and stability & control. Before the installation of Spin/Stall Recovery System of turbo-prop airplane, all control functions of this system were validated by the SBTB(System Breakout Test Box) in the laboratory. SBTB was used to confirm if it can detect faults, and simulate the firing of pyrotechnic devices that control the deployment and jettison of it. Once confirmed normal operation, deployment of parachute on the high speed taxiing were performed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.20-28
• /
• 2002

In this paper, the aerodynamic performance prediction of a 30kW counter-rotating (C/R) wind turbine system has been made by using the momentum theory as well as the two-dimensional quasi-steady strip theory with special care on the wake and the post-stall effects. In order to take into account the wake effects in the performance analysis, the wind tunnel test data obtained for a scaled blade are used. Both the axial and rotational inductions behind the auxiliary rotors are determined through the wake model. In addition, the optimum chord and twist distributions along the blades are obtained from the Glauert's optimum actuator disk model considering the Prandtl's tip loss effect. The performance results of the counter-rotating wind turbine system are compared with those of the conventional single rotor system and demonstrated the effectiveness of the counter-rotating wind turbine system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.575-578
• /
• 2005

The optimum design and the performance analysis software called POSEIDON for the HAWT (Horizontal Axis Wind Turbine) was developed by use of BEMT. The Prandtl's tip loss theory was adopted to consider the blade tip loss. The lift and the drag coefficient of S-809 airfoil were predicted via X-FOIL and also the post stall characteristics of S-809 were estimated by the Viterna's equations. All the predicted aerodynamic characteristics are fairly well agreed with the wind tunnel test results, performed by Sommers in Delft university of technology. The rated power of the testing rotor is 20kW(FIL-20) at design conditions. The experimental aerodynamic parameters and the X-FOIL data were used for the power prediction of the FIL-20 respectively. The comparison results shows good agreement in power prediction.

• New & Renewable Energy
• /
• v.1 no.4 s.4
• /
• pp.38-42
• /
• 2005

The optimum design and the performance analysis software called POSEIDON for the HAWT [Horizontal Axis Wind Turbine] was developed by use of BEMT. The Prandtl's tip loss theory was adopted to consider the blade tip loss. The lift and the drag coefficient of S-809 airfoil were predicted via X-FOIL and also the post stall characteristics of S-809 were estimated by the Viterna's equations. All the predicted aerodynamic characteristics are fairly well agreed with the wind tunnel test results, performed by Sommers in Delft university of technology. The rated power of the testing rotor is 20kW[FIL-20] at design conditions. The experimental aerodynamic parameters and the X-FOIL data were used for the power prediction of the FIL-20 respectively. The comparison results shows good agreement in power prediction.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.444-447
• /
• 2009

The optimum design and the performance analysis software called POSEIDON for the HAWT (Horizontal Axis Wind Turbine) was developed by use of BEMT. The Prandtl's tip loss theory was adopted to consider the blade tip loss. The aerodynamic characteristics of NACA 63415 airfoils were predicted via X-FOIL and the post stall characteristics were estimated by the Viterna's equations. All the predicted aerodynamic characteristics are fairly well agreed with the Velux wind tunnel test results. The rated power of the testing rotor is 5kW at design conditions. The power, estimated by use of predicted lift and drag coefficient via X-FOIL becomes a little higher than experimental one.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.356-362
• /
• 2007

The optimum design and the performance analysis software called POSEIDON for the HAWT (Horizontal Axis Wind Turbine) was developed by use of BEMT. The Prandtl's tip loss theory was adopted to consider the blade tip loss. The aerodynamic characteristics of NACA 63-415 airfoils were predicted via X-FOIL and the post stall characteristics were estimated by the Viterna's equations. All the predicted aerodynamic characteristics are fairly well agreed with the Velux wind tunnel test results. The rated power of the testing rotor is 1 kW at design conditions. The power, estimated by use of predicted lift and drag coefficient via X-FOIL becomes a little higher than experimental one.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.6-6
• /
• 1998

중형항공기용 터보팬 엔진의 정상상태 및 천이상태 성능을 해석하고 제어기 설계를 위한 선형모델을 구하였다. 정상상태 성능해석은 설계점으로 선정한 지상정지조건과 최대상승조건(Mach=0.78, 고도=36000ft) 및 순항조건(Mach=0.78, 고도=39000ft)을 고려하였으며, 저압압축기의 공회전 상태에서 최대 회전속도까지의 부분부하성능해석을 수행하였다. 부분부하 성능해석 결과 90% RPM 조건에서 가장 연료소모율이 적어 경제적임을 알 수 있다. 동적 성능모사는 각각의 대기조건에서 연료가 Step 증가, Ramp 증가 및 감소, Step 증가 후 Ramp 감소하는 경우에 대해 수행하였다. 모사결과 고려된 모든 조건에서 연료의 Step 증가시 고압압축기의 터빈입구온도가 제한온도를 초과하여, 보다 빠른 가속과 최적의 성능을 위해서는 적절한 제어가 필요함을 알 수 있었다. 또한 최대상승조건에서 연료를 Step 증가시킬 경우 고압압축기에서 실속이 발생하여 이에 대한 대책도 필요함을 알 수 있었다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.168-169
• /
• 2005

The optimum design and the performance analysis software called POSEIDON for the HAWT (Horizontal Axis Wind Turbine) was developed by use of BEMT. The Prandtl's tip loss theory was adopted to consider the blade tip loss. The lift and the drag coefficient of S-809 airfoil were predicted via X-FOIL and also the post stall characteristics of S-809 were estimated by the Viterna's equations. All the predicted aerodynamic characteristics are fairly well agreed with the wind tunnel test results, performed by Sommers in Delft university of technology. The rated power of the testing rotor is 20kW(FIL-20) at design conditions. The experimental aerodynamic parameters and the X-FOIL data were used for the power prediction of the FIL-20 respectively. The comparison results shows good agreement in power prediction.