• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1169-1173
• /
• 2000

최근에 미국에서는 실선에 대한 충격파 실험의 제약으로 인하여 수치시뮬레이션의 필요성이 더욱 야기되어 1996년도부터 수상함에 대한 실험대체용 수치계산의 가능성에 대한 연구가 시작되었다. 잠수함등과 같이 잠겨진 구조물에 대한 연구는 활발히 이루어졌으나 수상함에 대한 연구는 단순구조물을 대상으로 한 제한적 연구가 이루어져 왔다. 특히 본 연구에서는 아주 복잡한 수상함 구조물을 최대한 정확히 유한요소법으로 모델링하였다. 이러한 실선 충격연구는 실제 실선에 마운트되는 주요 장비의 안정성평가에 아주 중요한 자료를 제공하여주므로 시급한 과제이다. 하지만 수상함의 경우 유체-구조물 상호작용, 자유표면, cavitation등과 같은 해석상의 어려움과 복잡한 구조물의 모델링시 나타나는 현 단계에서의 계산상의 한계 등등 여러 가지 난제가 존재하고 있는 것도 사실이다. 본 논문에서는 수상함 내충격 수치해석의 현기술을 알아보고 수치계산의 발전방향을 제시보고자 한다.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.109-112
• /
• 2012

선박의 저항을 추정하는 일은 선박설계에 있어 가장 기본적인 작업이다. 그러나 선박의 크기는 매우 크기 때문에 일반적으로 모형선 실험을 통해 선박의 저항을 추정한다. 이 때, 모형선 실험은 Froude 수를 기준으로 수행하게 되는데 이 때문에 모형선과 실선의 Reynolds 수가 서로 다른 영역에 놓이게 된다. 따라서 모형선 실험에서 얻어진 데이터를 실선에 그대로 적용할 수 없기 때문에 모형선-실선 저항추정법을 사용하게 된다. 본 연구에서는 이러한 모형선-실선 저항추정법에 사용되고 있는 2 차원 외삽법을 살펴보고 이 기법에 사용되고 있는 ITTC 마찰저항곡선을 등가평판 주위의 유동장 해석결과와 비교하였으며 ITTC 마찰저항곡선에 대해 고찰하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.538-549
• /
• 2021

In this study, a trim tab on the stern hull of a small high-speed vessel of approximately 10 m length sailing at a Froude number of 1.0 was designed for energy efficiency. The running attitude and resistance performance of the bare hull and trim tab hull at several angles to the base line were analyzed for model and full scale ships using computational fluid dynamics, and compared to investigate the scale effect. The analysis results for the bare hull were quite similar, but a difference in the attitude control under same conditions of the trim tab was observed, resulting in the total resistance error. However, there was no significant difference in tendency of the variation in the resistance with the attitude. Thus, the optimum running attitude could be determined from the tendency despite the scale effect, but a full scale analysis is required to analyze the control of the attitude by the trim tab and flow characteristics near the full scale ship.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.656-665
• /
• 2021

In this study, trim tabs were attached to end of stern hull of a small high-speed vessel of length approximately 10 m and Froude number 1.0 to improve resistance performance and passenger comfort. Before computational fluid dynamics (CFD) simulations to assess the performance according to various geometries of the trim tab, the scale effect had been found through a previous study, so full-scale simulations were performed. The trim tab chord length was set to 0.5 %, 1.0 % and 1.5 % of L_PP, and its angle to base line was varied in intervals of 5°. It decreased trim by stern and flotation: the greater the angle and length, the greater was the effect. Then it had pressure resistance decreased and shear resistance increased, and reduction ratio of total resistance varied accordingly. The results of this study indicated that the resistance performance was improved about 27 % at optimal running attitude that was the trim by stern about 1.5°.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.5
• /
• pp.33-35
• /
• 1995

수치 해석적 방법으로서의 CFD(Computational Fluid Dynamics)는 급속한 전산기성능의 발달과 더불어 많은 발전을 거듭하고 있으며, 특히 선박분야에 있어서도 일반선형에 대한 주위의 유 동장해석 및 성능추정, 초기설계에의 응용에서 그 활용성이 입증되고 있다. 따라서, 초고속선에 대하여도, CFD의 대표적 장점이라 할 수 있는 실선에 대한 수치실험이 짧은 시간에 저가의 경비로 가능하다는 것과 그 결과가 모형선 실험결과보다 상세하고 충실한 정보의 확보가능 등을 감안한다면, 앞으로 초기 초고속선 선형개발단계에서 CFD의 적용을 기대해 볼만 할 것이다. 이러한 관점으로부터, 본 고에서는 초고속선의 선형개발에 있어서 CFD의 활용성에 관하여 고 찰해 보고자 한다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.3
• /
• pp.205-211
• /
• 2014

Interests on energy saving devices (ESDs) have been increased with the concern of the energy efficiency design index (EEDI) developed by the international maritime organization (IMO). To study the influence of ESDs, KVLCC2 with energy saving pre-swirl stator (PSS) was selected. To validate the computations, computed nominal wake of the model scale ship was compared with the experimental data, and the numerical uncertainty assessment was done for the full scale ship computations. The PSS changed rotational flow, which was assistant to the propeller thrust for the model and full scale ships. Performances of the full scale ships were predicted by ITTC methods, and new prediction method was proposed.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.61-73
• /
• 1993

In the present study, sloshing problem is analyzed by the application of Finite Difference Method. SOLA-SURF scheme is applied to the analysis of fluid motion considering free surface. Especially, the concept of impact buffer zone is introduced for the prediction of more realistic impact pressure on tank. Numerical computation is carried out for the typical three models, and the computed results show good agreement with experimental data. The computation is also performed for 300,000 tons VLCC as a real-ship application. From the present study, it is proved that this numerical technique is quite practical to the prediction of sloshing impact pressure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.457-464
• /
• 2021

Cargo securing safety, which is one factor for the safe operation of car ferry ships, has been applied since 2015 and evaluated by comparing the hull motion and securing load capacity generated by waves. To ensure the safe operation of the 3700 ton class car ferry, it is important to analyze the hull acceleration motion based on the sea wave information of the navigation area to determine the cargo securing load that can prevent the movement of cargo. In this study, the meteorological information of three wave buoys installed in Busan and Jeju area was analyzed for the past 5 years. In addition, the hull acceleration was measured in actual sea conditions and compared to that of numerical simulations. Under the condition of a significant wave height of 2.5 m from Feb to Mar, except typhoon seasons, the lateral acceleration was observed to be 1.5 m/s² in real ship measuring and 1.8 m/s² in numerical calculation. It was analyzed to be less than 40% under general weather conditions compared to the high wave warning using an approximate formula for estimating the hull motion by wave height. The cargo securing safety proposed in this study will be widely used based on the actual measuring acceleration with the sea wave height.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.78-79
• /
• 2020

국내 연안의 카페리선박의 고박안전성은 화물의 중량과 적재된 위치에서 발생할 수 있는 선체가속도를 기반으로 한 작용 외력과 고박장치의 고박력 비교를 통해 평가하고 있다. 국내 기준상의 선체가속도는 선박의 특성 및 항해조건의 반영이 없이 적용됨에 따라, 본 연구에서는 국내 연안 카페리선박의 선체가속도를 분석하고자 부산-제주를 통항하는 DWT 6,800톤급 선속 15.5 knots의 선박을 기준으로 선체의 4개 지점에서 총 12회의 가속도 계측을 수행하였고, 수치 시뮬레이션을 통하여 가속도 해석을 수행하였다. 가속도 비교 결과를 통하여 고박안전성 평가에 적용되어야 하는 가속도 적용 및 고박안전성 평가 방법에 대한 검토를 제시하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.1-7
• /
• 1999

This paper describes the modification of hull bottom for the air lubrication technique to the passenger boat in service at the Chung-Ju lake, which has a large beam-draft ratio. From numerical analysis of 2-D cavity problem by potential theory, the cavity shape, length and the pressure in cavity are estimated for the simplified geometry of hull bottom, and the non-dimensional parameters affecting air cavity phenomena are investigated. Extensive resistance tests for the model ship which has variation of step height and side strip have been performed to investigate the formation of air cavity and the drag reduction effectiveness. And also, the development of attached cavity to the bottom were observed from the flat bottom made by transparent acrylic plate. From this survey on the modification of bottom shape and the air lubrication technique, the total resistance of model ship could be reduced by about 25% at the design speed compared to the proto type hull form.