• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.78-79
• /
• 2020

국내 연안의 카페리선박의 고박안전성은 화물의 중량과 적재된 위치에서 발생할 수 있는 선체가속도를 기반으로 한 작용 외력과 고박장치의 고박력 비교를 통해 평가하고 있다. 국내 기준상의 선체가속도는 선박의 특성 및 항해조건의 반영이 없이 적용됨에 따라, 본 연구에서는 국내 연안 카페리선박의 선체가속도를 분석하고자 부산-제주를 통항하는 DWT 6,800톤급 선속 15.5 knots의 선박을 기준으로 선체의 4개 지점에서 총 12회의 가속도 계측을 수행하였고, 수치 시뮬레이션을 통하여 가속도 해석을 수행하였다. 가속도 비교 결과를 통하여 고박안전성 평가에 적용되어야 하는 가속도 적용 및 고박안전성 평가 방법에 대한 검토를 제시하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.131-132
• /
• 2020

자율운항선박 지원 6종서비스는 자율운항선박의 도입에 따른 항계 및 협수로 내에서 터미널까지 안정적으로 통항과 자율적인 이·접안 및 화물 적·하역이 가능하도록 안전운항을 지원하는 기술을 의미한다. 자율운항선박 지원 6종서비스에는 근접 선박에 대한 연속 회피가 가능한 자율운항 지원 서비스, 인공지능 센서 융합을 통한 접·이안 및 계류 지원 서비스, 스마트 해상 물류 프로세스를 위한 화물 양·적하 및 선박 입출항 지원 서비스, PSC 점검율 제고를 위한 PSC 점검 지원 서비스, 선박의 주요 기기를 육상에서 관찰하기 위한 상태모니터링 지원 서비스, 해양사고 발생 시 신속한 조치를 위한 사고대응 지원 서비스로 이루어져 있다. 이 연구에서는 개발되는 안전운항 지원서비스 6종의 실용성 및 현장 적용 가능성을 테스트하기 위한 실선박 기반의 검증 시나리오를 개발하고 6종 서비스의 육상 시범 운용을 위한 인프라를 구축하고자 하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.78-79
• /
• 2022

육상제어센터의 원격제어시스템은 원격모니터링시스템, 원격제어시스템, 메시지 교환장치 및 선박모사장치로 구성되었다. 본 연구에서는 육상제어센터의 원격제어시스템 실험을 위해 실습선 한나라호와 육상제어센터 간 통신망(VSAT, LTE)를 활용하여 1) 장비테스트, 2) 시나리오 기반 테스트를 실시하였다. 먼저, 장비테스트는 정박 및 항해중 필수장비(Rudder, Engine, Thruster)에 대해 이루어졌으며, 시나리오 기반 테스트는 항해중 안전수역내에서 제어실험이 이루어졌다. 장비테스트 결과는 선박-육상 간 지연시간은 0.1초이내이며, 시나리오 기반 테스트 결과는 선박에서 육상제어센터까지 평균지연시간은 0.87초이며 최대 9.88분, 육상제어센터에서 선박까지 평균지연시간은 1.14초이며, 최대 8.9분이다. 이와 같이, 선박과 육상간 송수신된 데이터 분석을 통해 선박과 육상 간의 원격제어 및 통신네트워크의 문제점 식별하고, 이에 대한 대안방안 등을 제시하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.82-83
• /
• 2023

자율운항선박 원격제어시스템은 선박운항상태모니터링시스템, 통신시스템, 선박제어시스템으로 구성되어 있다. 육상제어센터는 자율운항선박의 원활한 원격제어를 위해 각 개별시스템의 통합절차를 거쳐 육상제어센터의 통합시스템을 구축하였다. 이에 본 연구에서는 원격제어 실선실험을 통해 작동성능시험, 제어성능시험, 조종성능시험 등 3종 성능평가를 시행, 원격제어시스템을 평가하고자 한다. 이중에서 일부 성능평가를 시행하여 식별된 문제점과 이를 해결하기 위한 방안을 제시, 향후 진행되는 추가성능시험을 통해 원격제어시스템의 안정성을 확보하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.238-238
• /
• 2023

소형선박인 어선·낚시어선의 전복 사고로 인한 인명 사고가 지속적으로 발생 되어지고 있다. 소형선박인 어선·낚시어선의 운항 시 선박의 운항자가 선박의 실시간 복원성 상태 인지 없이 어업 또는 낚시 활동하는 동안 해양 환경 상태 또는 적화 상태 변화와 추가적인 외력에 의해서 선박의 전복 사고가 발생 되어진다. 본 연구에서는 소형선박 어선·낚시어선의 실시간 복원성 감시를 위한 안전키트의 실험적 검증을 실시했다. 안전키트의 자이로센서를 활용하여 실시간 횡요각 데이터 측정 및 주파수 분석하여 횡요주기를 도출하고 횡메타센터(GM)을 도출한다. 또한, 실사간 도출된 GM에 따라 국제해사기구(IMO, International Maritime Organization) 비손상 복원성 평가 기준 값을 추정한다. 실험적 검증을 통하여 개발된 소형선박 어선·낚시어선용 안전키트의 정확도 확인 및 개선점을 발견하였으며, 향후 연구 계획에 대해서 제시했다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.226-233
• /
• 2002

In the field of research of sea keeping quality, much development has been made in recent years using the method of calculation based on the strip theory. It is very important to investigate the hull response of a fishing vessel in waves to ensure the safe navigation and fishing operation in rough seas by preserving excellent sea keeping qualities. For this purpose, the author measured various responses of three fishing vessels in waves using real sea experimental measuring system and analyzed the experimental data The results obtained can be summarized as follow. 1. The amplitudes of pitching motion in the experiments appeared low values with more than one peak occasionally in following sea and quartering sea, and the band width of those was found to be wide relatively. 2. The amplitudes of rolling motion in the experiments appeared high values with only one peak in following sea and quartering sea regardless of ship's tonnage, and the band width of those was found to be narrow relatively. 3. The comparisions of theoretical results with those of experiments for the pitching motions and rolling motion in following sea and quartering sea show that the theoretical values are higher slightly than those of experiments in both directions and the period at which the peak appears in the calculations and the experiments has good agreement approximately 4. The calculated responses of two vessels under a assumed wave of 2.2m height and 5.0sec period showed that the response of pitching motion of ship-A are 2.2 times bigger than those of ship-C in following sea and quartering sea, and the response of rolling motion of ship-A is 4.2 times bigger than that of ship-C in quartering sea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.447-454
• /
• 2017

Using two large coast guard ships at sea, we created four encounter situations ($000^{\circ}$, $045^{\circ}$, $090^{\circ}$, $135^{\circ}$) with high possibility of collision, from 3 NM up to 0.25 NM. As relative distance was gradually decreased, the subjects were measured at 0.25 NM intervals and perceived ship collision risk (PSCR) was determined by looking at the opponent ship. Characteristics were statistically analyzed using the obtained data. The purpose of this study was to analyze the characteristics of collision risk values obtained from twelve intervals, from 3 NM to 0.25 NM relative to encounter situations by curve fitting with appropriate polynomials, to determine the distance from which the change in perceived collision risk is greatest. As a result, an optimal regression equation for each distance interval was derived from each analysis direction. The greatest variation in average collision risk value was over the range 1.25 ~ 1 NM, and the collision risk value was largest at 1 NM. The maximum change in perceived collision risk was at 1 NM. These results can contribute to preventive guidelines to minimize human error in close proximity situations with a high probability of ship collision.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.439-446
• /
• 2006

In ship structures many of the structural plates have cutouts, for example, at inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has a cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed In general, actual ship structure adopted reinforcement of stiffener around the cutout in order to preventing from buckling so it need to examine a buckling and ultimate strength behaviour considering a cutout because In many ship yards used class rule for calculating buckling strength but it is difficult to evaluate perforate stiffened plate with random size. In the present paper, we investigated several kinds of perforated stiffened model from actual ship and then was performed finite element series analysis varying the cutout ratio, web height, thickness and type of cross-section using commercial FEA program(ANSYS) under compressive load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.143-153
• /
• 2018

Environmental regulations, which are discussed through the International Maritime Organization, focus on two aspects: the economic supply of fuel oil and, ultimately, securing next-generation energy sources. At present, there are limitations in relation to the basic quality of fuel oil and the direct relation through basic quality when applied to ships and traps in relation to environmental regulations, and the standard for the basic quality of fuel oil is generally used. There are many cases where the composition is very complicated, and the interpretation and analysis of basic quality deviate from the range of the basic standard. In other words, it is difficult to classify and apply the problem when analyzing it in connection with fuel quality and ship operations. In this paper are various factors for the basic quality of fuel oil, and a proposed possibility for the scope of the standard.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.15-21
• /
• 2020

This study analyzes the results of applying the ISO19030 (hull and propeller performance monitoring method) standard to an actual 178 k bulk vessel. Recently, there have been many attempts to apply various energy reduction solutions to vessels to continuously strengthen GHG reduction regulations and secure maritime competitiveness. However, it is not easy to quantitatively analyze the performance of a ship. To resolve these problems, shipping companies, marine paint companies, ship owners, and transportation associations have appointed specialists and standardized the ISO19030 (standard of hull and propeller performance monitoring method) guidelines in 2016 after three years of continuous review. The ISO19030 standard provides methods to monitor hull and propeller performance quantitatively through standardized procedures, thus allowing ship managers to arrive at informed decisions for hull and propeller maintenance, and to evaluate energy-saving solutions and ship-maintenance efficiency. The ISO19030 standard provides a method of analyzing the ship's own performance by collecting the ship's operation and agency data and correcting its environmental and operating factors. In this paper, we apply the ISO19030 standard to three actual ships and propose the ISO19030 application result and the improvement point of the current ISO19030 standard.