• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.40-42
• /
• 2011

예선이 부선을 선미 예인하는 상황에서의 예부선 조종특성을 확인하기 위하여, 예부선 통합 자유항주 모형시험을 수행하였다. 기존의 실선시운전에서는 관측하지 못한 부선의 불안정한 거동을 확인하였으며, 브라이들을 이용한 2점 예인 상태로, 우현 10도, 20도, 30도 선회시험을 수행하여 예선과 부선의 선회반경을 측정하였다. 시험수행조건이 다르나, 실선시운전 결과와 비교하여 선회반경이 약 3배 이상 커진 것을 확인할 수 있었다. 또한 부선의 선회궤적이 예선의 선회궤적 안쪽에 존재하는 것도 재확인할 수 있었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.50-59
• /
• 1997

Shipbuilder checks the status of main engine and propeller operation before sea trial. Generally these tests are carried out at a quay during fitting out of the ship. For these tests the operator has to estimate the maximum RPM with permissible torque and thrust to ensure the safety of the mooring line and ship. In this paper, the propeller characteristics according to the draft variation for a moored ship is inveatigated. From these tests, it is shown that shaft submergence is a dominant parameter in the propeller performance at shallow shaft submergence and that the propeller performance is dependent upon the propeller RPM when the shaft submergence is kept unchanged. In this study, a simple formula of the required thrust for a given propeller shaft submergence and propeller RPM is derived. 1be propeller thrust, which is calculated by another formula in case of dtep draft, is compared with results of bollard pull test for FPSO.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.5 no.2
• /
• pp.93-102
• /
• 1968

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.257-258
• /
• 2019

이 연구는 기 개발한 간이 선박조종 시뮬레이터의 조종성능 개선에 관한 것이다. 선박조종 시뮬레이터에서 모델선박의 조종성 지수는 임의로 정하는 것이 아니라 가능한 모델대상선박의 실제 움직임과 동등하거나 유사하게 설정되어야 한다. 선행연구에서는 이미 발표된 대학교 실습선(한바다호)의 선박조종 실선데이터를 기반으로 모델선박의 조종성 지수를 도출하였으나, 타각이 10°를 초과할 경우 네 종류의 실선시험 결과와 평균 17.9%의 상대오차가 발생하였다. 이에, 타각 10°, 20° 및 35°에서의 한바다호 조종성 지수에 대해 에르미트 보간을 이용하여 3차 다항식을 산출하고, 이를 모델선박에 적용하였다. 그 결과 타각 35° 이내의 전 구간에서 조종성능의 상대오차가 평균 13.7%에서 11.6%로 약 2.1% 개선됨을 확인하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.1
• /
• pp.52-59
• /
• 2020

This study aims to investigate the bow thruster performance of the research vessel "NARA" by full-scale maneuvering trials. The thruster test method refers to ITTC's recommended procedures and guidelines. Turning tests with the bow thruster are performed at speed conditions of 0, 2, and 4 knots. The test results indicate that the Rate of Turn (ROT) increased when the ship is in a higher speed condition. Due to the position of the propeller and the housing of the bow thruster, there is difference in the efficiency of the bow thruster according to the turning direction. Zigzag tests with the bow thruster were conducted at speed conditions of 2 and 4 knots. At speeds above 4 knots, it seems difficult to change the course only with the bow thruster.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.22-30
• /
• 2010

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.171-179
• /
• 2016

In order to study correlation of the propeller cavitation performance between a full-scale ship and a model ship for the MR Tanker, the full-scale ship and the model tests were conducted. The full-scale ship test is composed of cavitation observation, pressure fluctuation and noise measurements, which are conducted using 2 observation windows and 8 pressure transducers installed inside the full-scale ship above the propeller. The model test in the Large Cavitation Tunnel(LCT) was conducted at the same conditions as that of the full-scale ship and its results are compared with those of the full-scale ship. Through the model-ship correlation analysis, it is considered that the experimental technique for the MR Tanker class ship was verified in LCT.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.12-13
• /
• 2018

For navigation safety, navigators have to be familiar with maneuverabilities. When a vessel encounters a danger of collisions and stranding, maneuverability is essential for the safety of ship. It is composed of turning, course change, speed change, etc. In the latter part, maneuverabilities and motion of Training Ship HANBADA are provided by full-scale measurement in the $10^{\circ}/10^{\circ}$ Zig-Zag Test, $20^{\circ}/20^{\circ}$ Zig-Zag Test and Turning Circle Test(Port and Starboard). It aims to provide information on maneuverabilities and motion of Training Ship HANBADA so that the navigators can take proper action to avoid.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.3
• /
• pp.19-28
• /
• 1995

This paper presents hull form design details and performance characteristics of the SWATH ship 'SEON JIN' built as an underwater test support ship. The hull form is developed systematically varing sets of 11 form parameters which define a unique hull under waterline. Using this geometry variation scheme we have generated a number of alternatives and selected the final hull which fulfills the design objectives and matches the design constraints. After selecting the final hull form we have investigated performances thoroughly through model tests, and confirmed through sea trials that the performance goals be achieved.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.4
• /
• pp.222-227
• /
• 2018

Most underwater acoustic arrays for low frequency operation are deployed vertically, but a mid-range frequency horizontal array system is being developed by the Korea Research Institute of Ships and Ocean Engineering (KRISO). The horizontal array platform is deployed underwater and kept in place by weather vaning mooring. This is essential because it is nearly impossible to keep a submerged body at a given position in the water without any external force. Hence, the horizontal array platform can maintain the desired position in the presence of a weak tidal current. The objective of this study is to design an underwater platform that can maintain its horizontal position in a weak current. First, the authors investigated various virtual models, selected one of the models, and performed a small model test of the selected model at a basin. We calculated the external forces associated with the 2D motion, and then we conducted a large basin test followed by a circulation water channel test for the manufactured array platform. The results of the simplified 2D motion calculation essentially matched the results of the underwater test.