• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.59-68
• /
• 2002

The cylindrical Upper Guide Structure assembly of the reactor intervals wish the Core Support Barrel and the Inner Barrel Assembly is subjected to flow induced loads horizontally which include random pressure fluctuation due to turbulent flow and pump pulsation pressures. The purpose of this papers is to perform random vibration and harmonic response analyses fort flow induced loads. The dynamic response characteristics due to random turbulence and pump pulsation loads were evaluated using the lumped mass beam model. Especially the model considered the annulus effects due to water gaps existing between cylindrical structures such as the Upper Guide Structure Barrel, the Core Support Barrel, and the Inner Barrel Assembly. The effect of the Inner Barrel Assembly inside the Upper Guide Structure assembly was studied. The peak dynamic responses lot each loading condition due to the addition of IBA were affected by the natural frequencies of the structures. Therefore the peak dynamic responses of the structures should be conservatively obtained from evaluation of dynamic analysis for various loading conditions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.59-60
• /
• 2007

전기 정유압장치는 밸브플레이트, 실린더 배럴, 피스톤, 샤프트등으로 이루어진 유압펌프의 부품에 요구되는 기계적 성질을 향상하기위하여 이온 질화를 포함한 다양한 연구가 진행 되어지고 있다. 그러나 본실험에서는 이온질화시 발생하는 열변형등의 단점을 해결하기 위하여 PVD 박막을 실시하여 유압펌프 부품의 마모특성 향상에 관한 연구를 실시하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.24-35
• /
• 1984

에너지 문제가 세계적으로 정치, 경제, 기술, 즉 일반생활의 모든 분야에 있어서 가장 중요한 과제로 대두되고 있다. 이는 산유지의 지하에서는 계속해서 생산되고 있으나 무한정으로 원유가 매장되어 있으리라고는 생각되지 않는다. 현재 세계는 정치, 경제적 책략 때문에 석유의 생산부족 및 고가화되어 가면서도 석유의 고갈현상이 시작되어 21세기초에는 석유생산이 수요를 따를 수 없게 될 것 같다. 이러한 석유자원의 감소와 산유국의 정책변환에 따라 1973년 제 1 차 오일 쇼크에 이어 1978년말부터 제 2 차 오일쇼크를 가져와 70년대초 1배럴당 2-3달러에 불과하던 유가가 34달러까지 폭등하여 세계경제에 막대한 영향을 미쳤다. 본고에서는 현재 세계 에너지 자원의 매장량과 앞으로의 에너지 수요증가 및 석유생산의 예측 등을 살펴봄으로써 에너지의 심각성을 인식케하며, 또한 앞으로 에너지자원의 의존도가 가장 클 여러가지 대체연료에 대하여 이용기술의 현황, 대체연료로서의 적성 및 그 장래문제에 대하여 언급하고자 한다. 끝으로, 최 근의 에너지절약 방법으로 연구개발되고 있는 기관의 배기에너지의 유료이용, 신현 원동기의 에너지절약성 및 가변실린더수의 기란 등에 대하여 기술하고자 한다.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.1 no.3
• /
• pp.7-13
• /
• 2004

The hydraulic pump for a Electro-hydrostatic Actuator for aircrafts should be able to quickly feed large volume of oil into hydraulic cylinder in order to reduce the response time. On the other hand, it should be also able to precisely dispense small amount of oil by low-speed operation so that the steady state position control error of the EHA can be accurately compensated. This paper is focused on the investigation how the plasma coating surface treatment of cylinder barrel with CrSiN can contribute to the reduction of low-speed friction torque of a bent-axis type piston pump. The results showed that the reduction of the friction torque was not remarkable, but that the anti-wear characteristics of the CrSiN-coated cylinder barrel were much better that those of the original one.

• Tribology and Lubricants
• /
• v.28 no.1
• /
• pp.12-18
• /
• 2012

This application study of a swash-plate type axial piston pump was concerned about the lubrication characteristics between cylinder barrel and valve plate which are the main rotating body and its opposite sliding part respectively. A computer simulation was implemented to assess bearing and sealing functions of the fluid film between cylinder barrel and valve plate. A numerical algorithm was developed to facilitate simultaneous calculations of dynamic cylinder pressure, 3 degree-of-freedom barrel motions considering inertia effect, and fluid film pressure assuming full fluid film lubrication regime. Central clearance, tilt angle, and azimuth angle of the rotating body were calculated for each time step. Surface waviness was found to be an influential factor due to the small fluid film thickness which can appear in flat land bearings. Five surface lays which can form on the lubrication surface in accordance with machining process were defined and analyzed using the simulation tool. Oil leakage flow and frictional torque in the fluid film between cylinder barrel and valve plate were also calculated to discuss in the viewpoint of energy loss. The simulation results showed that in actual sliding conditions proper surface non-flatness can make a positive effect on the energy efficiency and reliability of the thrust bearing.