• 제목/요약/키워드: 실린더 배럴

검색결과 5건 처리시간 0.018초

유체유발하중을 받는 상부안내구조물의 랜덤진동 및 조화응답해석 (Random Vibration and Harmonic Response Analyses of Upper Guide Structure Assembly to Flow Induced Loads)

  • 지용관;이영신
    • 한국전산구조공학회논문집
    • /
    • 제15권1호
    • /
    • pp.59-68
    • /
    • 2002
  • 원자로 내부구조물의 상부안내구조물집합체는 노심지지배럴과 내부배럴집합체와 함께 원통형의 실린더 구조이며, 유체의 난류하중과 펌프의 맥동하중으로 인한 유체유발하중을 수평방향으로 받는다. 본 논문에서는 이 유체유발하중에 대한 랜덤진동해석과 조화응답해석을 수행한 내용을 기술하였다. 이 해석을 위해 집중질량 보 요소 모델을 사용하였고, 랜덤하중과 펌프맥동하중으로 발생되는 동적응답특성을 평가하였다. 특히 원통형태의 상부안내구조물, 노심지지배럴, 내부배럴집합체 사이에서 형성되는 환형공간의 동수력 연성 효과를 고려하여 모델링 하였고, 상부안내구조물 안쪽에 설치되는 내부배럴집합체의 추가 영향을 검토하였다. 내부배럴집합체의 추가로 인한 하중조건별 최대동적응답은 구조물의 고유진동수에 영향을 받으며, 따라서 구조물의 최대동적응답은 여러 하중 조건별 동적해석 평가를 통해 보수적으로 구하여져야 한다.

Cr-X-N(X=Si, Zr) 코팅된 유압펌프 부품의 마모특성 향상에 관한 연구 (Improvement of Tribological Properties of Cr-X-N(X=Si, Zr) Coatings Deposited on Hydraulic Pump Part)

  • 김범석;김정택;이상율
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2007년도 춘계학술발표회 초록집
    • /
    • pp.59-60
    • /
    • 2007
  • 전기 정유압장치는 밸브플레이트, 실린더 배럴, 피스톤, 샤프트등으로 이루어진 유압펌프의 부품에 요구되는 기계적 성질을 향상하기위하여 이온 질화를 포함한 다양한 연구가 진행 되어지고 있다. 그러나 본실험에서는 이온질화시 발생하는 열변형등의 단점을 해결하기 위하여 PVD 박막을 실시하여 유압펌프 부품의 마모특성 향상에 관한 연구를 실시하였다.

  • PDF

세계의 에너지현황, 신연료의 개발 및 에너지절약 기관에 대하여 (Present status of energy, development of alternative fuels and energy saving engines)

  • 한영출
    • 오토저널
    • /
    • 제6권3호
    • /
    • pp.24-35
    • /
    • 1984
  • 에너지 문제가 세계적으로 정치, 경제, 기술, 즉 일반생활의 모든 분야에 있어서 가장 중요한 과제로 대두되고 있다. 이는 산유지의 지하에서는 계속해서 생산되고 있으나 무한정으로 원유가 매장되어 있으리라고는 생각되지 않는다. 현재 세계는 정치, 경제적 책략 때문에 석유의 생산부족 및 고가화되어 가면서도 석유의 고갈현상이 시작되어 21세기초에는 석유생산이 수요를 따를 수 없게 될 것 같다. 이러한 석유자원의 감소와 산유국의 정책변환에 따라 1973년 제 1 차 오일 쇼크에 이어 1978년말부터 제 2 차 오일쇼크를 가져와 70년대초 1배럴당 2-3달러에 불과하던 유가가 34달러까지 폭등하여 세계경제에 막대한 영향을 미쳤다. 본고에서는 현재 세계 에너지 자원의 매장량과 앞으로의 에너지 수요증가 및 석유생산의 예측 등을 살펴봄으로써 에너지의 심각성을 인식케하며, 또한 앞으로 에너지자원의 의존도가 가장 클 여러가지 대체연료에 대하여 이용기술의 현황, 대체연료로서의 적성 및 그 장래문제에 대하여 언급하고자 한다. 끝으로, 최 근의 에너지절약 방법으로 연구개발되고 있는 기관의 배기에너지의 유료이용, 신현 원동기의 에너지절약성 및 가변실린더수의 기란 등에 대하여 기술하고자 한다.

  • PDF

사축식 유압 피스톤 펌프의 저속 마찰 특성 개선 (Improvement of the Low-speed Friction Characteristics of a Bent-Axis Type Hydraulic Piston Pump)

  • 홍예선;이상율;김치붕;김성훈;임현식;김성대
    • 유공압시스템학회논문집
    • /
    • 제1권3호
    • /
    • pp.7-13
    • /
    • 2004
  • The hydraulic pump for a Electro-hydrostatic Actuator for aircrafts should be able to quickly feed large volume of oil into hydraulic cylinder in order to reduce the response time. On the other hand, it should be also able to precisely dispense small amount of oil by low-speed operation so that the steady state position control error of the EHA can be accurately compensated. This paper is focused on the investigation how the plasma coating surface treatment of cylinder barrel with CrSiN can contribute to the reduction of low-speed friction torque of a bent-axis type piston pump. The results showed that the reduction of the friction torque was not remarkable, but that the anti-wear characteristics of the CrSiN-coated cylinder barrel were much better that those of the original one.

  • PDF

표면가공무늬가 사판식 액셜 피스톤펌프의 밸브부 윤활특성에 미치는 영향에 관한 연구 (Surface Lay Effects on the Lubrication Characteristics in the Valve Part of a Swash-plate Type Axial Piston Pump)

  • 신정훈;강보식;김경웅
    • Tribology and Lubricants
    • /
    • 제28권1호
    • /
    • pp.12-18
    • /
    • 2012
  • This application study of a swash-plate type axial piston pump was concerned about the lubrication characteristics between cylinder barrel and valve plate which are the main rotating body and its opposite sliding part respectively. A computer simulation was implemented to assess bearing and sealing functions of the fluid film between cylinder barrel and valve plate. A numerical algorithm was developed to facilitate simultaneous calculations of dynamic cylinder pressure, 3 degree-of-freedom barrel motions considering inertia effect, and fluid film pressure assuming full fluid film lubrication regime. Central clearance, tilt angle, and azimuth angle of the rotating body were calculated for each time step. Surface waviness was found to be an influential factor due to the small fluid film thickness which can appear in flat land bearings. Five surface lays which can form on the lubrication surface in accordance with machining process were defined and analyzed using the simulation tool. Oil leakage flow and frictional torque in the fluid film between cylinder barrel and valve plate were also calculated to discuss in the viewpoint of energy loss. The simulation results showed that in actual sliding conditions proper surface non-flatness can make a positive effect on the energy efficiency and reliability of the thrust bearing.