• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.213-216
• /
• 2004

폐슬러지 실리콘과 흑연의 혼합물에 물을 주입하고 열처리하여, 마이크론 크기의 이산화 실리콘 구형입자를 제조하였다. 제조된 이산화 실리콘의 직경은 균일하고 약 $1.7\mu\textrm{m}$이다. 탄화 실리콘이 이산화 실리콘 구형입자와 함께 존재하였으며, 그 모양은 휘스커와 다면체였다. 폐슬러지 실리콘과 탄소의 혼합물을 고온에서 열처리하면 일산화 실리콘 기체가 생성된다. 물이 산소의 공급원으로 주입되면 일산화 실리콘 기체는 산소와 반응하여 이산화 실리콘 고체가 형성될 수 있다. 실리콘 공급원으로 일산화 실리콘이 반응기 내에 균일하게 분포하고 물을 주입하여 이산화 실리콘이 형성되는 메커니즘은 액상에서 수산화 실리콘 구형입자를 형성하는 메커니즘과 유사하다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.147-151
• /
• 2005

실리콘 잉곳의 절단공정에서 발생하는 폐실리콘 슬러지는 실리콘과 실리콘카바이드 등의 유가자원이 함유되어 있는데, 본 연구에서는 폐실리콘 슬러지 중의 실리콘 분말을 효과적으로 분리, 회수하는 방법에 대해 검토하였다. 폐실리콘 슬러지는 상당량의 절삭유와 소량의 철분말이 포함되어 있는데 절삭유는 유기 용매에 용해시켜 효과적으로 분리하였고, 철분말은 자력선별에 의해 제거하였다. 절삭유와 철성분이 제거된 잔사인 실리콘과 실리콘 카바이드의 혼합 분말로부터 초음파 분산 선별법을 사용하여 실리콘 분말을 효율적으로 분리회수 하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.67-71
• /
• 2003

Sawing silicon ingot with abrasive slurry generates sludge that includes abrasive powders, cutting oil, and silicon powders. The abrasive powders and cutting oil are being separated and reused. Mixing the remained stodged silicon powders with carbon powders and subsequent heat-treatment are conducted to produce silicon carbide. The size of SiC whiskers and powders was smaller than the conventionally grown silicon carbide whiskers that were synthesized by adding micron-size metal impurities. Impurity related mechanism is attributed to the formation of the silicon carbide whiskers, as metal impurities are contained in the stodged silicon powders.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.186-190
• /
• 2004

실리콘 잉곳의 절단공정에서 발생하는 폐슬러지는 실리콘과 실리콘카바이드 등의 유가자원이 함유되어 있으며, 이를 효과적으로 분리, 회수하는 방법에 대해 검토하였다. 폐슬러지에 함유된 오일은 유기 용매에 의해 용해되어 효과적으로 분리되었고, 불순물인 철분은 자력선별에 의해 제거할 수가 있었다. 또한 실리콘과 실리콘카바이드의 혼합 분말은 중액선별을 통하여 고순도의 실리콘과 실리콘카바이드로 분리할 수가 있었다.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.66-76
• /
• 2008

Silicon wafer is used in making semiconductor device of various forms in the semiconductor industry. Silicon wafer is produced by cutting silicon ingot and sludge containing silicon results from cutting process. The amount of silicon sludge is increasing owing to the usage of semiconductor device in many industry sectors. These days the recycling technologies of the waste silicon sludge has been widely studied from view point of economy and efficiency. In this study, patents on the recycling technologies of the waste silicon sludge were analyzed. The range of search was limited in the open patents of USA, European Union, Japan, and Korea up to september, 2007. Patents were collected using key-words and filtered by filtering criteria. The trend of the patents was analyzed by the years, countries, companies, and technologies.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.98-102
• /
• 2004

반도체 산업용 실리콘 잉곳의 절단공정에서 발생하는 폐슬러지 중에는 고순도의 실리콘이 함유되어 있으며, 이 슬러지로부터 분리, 회수한 Si로부터 실리콘화합물 합성하였다. 고비점의 potasium alkoxide 촉매 존재하에서 금속 실리콘과 에탄을 혹은 메탄올과 같은 알코올과의 고액반응에 의해 알콕시 실란을 합성할 수가 있었다 알콕시 실란을 합성반응속도는 반응온도에 크게 의존하였고 최적반응 온도는 $180^{\circ}C{\sim}195^{\circ}C$ 정도이었다. 촉매 첨가량에 따라 알콕시 실란의 반응율이 달라졌으며, 알콕시 실란의 반응율은 최고 90%로 높은 값을 나타내었다.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.45-49
• /
• 2017

Most Waste slurry is produced in the process of silicon manufacturing for semiconductor industry, containing silicon (Si) and silicon carbide (SiC). Waste slurry is simply stored with solidifying by cement or buried. On the other hand, it was suggested in this study that the waste slurry should be used for heating source as supplementary material in steel making process. The waste slurry was refined and pulverized, which was recycled into SiC-based sludge briquette. Chemical composition for SiC-based sludge briquette was analyzed and the feature of heating source was observed in accordance with the injection time and input amount. As a result, SiC-based sludge briquette in terms of low cost and high efficiency had an effect on increasing liquid steel temperature in steel making plants.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.308-313
• /
• 2005

실리콘 잉고트의 절단공정에서 발생하는 폐실리콘 슬러지는 실리콘과 실리콘카바이드 등의 유가자원이 함유되어 있으며, 이 중 실리콘 분말은 실리콘 화합물인 알콕시실란 등을 제조하는데 원료로 사용이 가능하다. 본 연구에서는 폐실리콘 슬러지로부터 분리, 합성된 사에 톡시실란(TEOS)을 원료로 이용하여 실리카 나노분말을 합성하였다. TEOS 원료물질을 외부 혼합형 이류체 노즐을 이용하여 미세액적으로 분무하고 화염 속으로 도입시키고 화염열분해 반응을 진행시켜 실리카 나노분말을 합성하였다. 합성된 실리카 나노입자의 특성은 투과형 전자현미경 및 BET에 의하여 입자형상 및 평균 입자크기가 분석되었다. 주요 공정변수인 분산공기의 압력, 반응가스의 조성을 변화시켜 실험한 결과 평균크기가 $9{\sim}68nm$인 실리카 나노분말을 제조하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2012

This paper explained about the sludge recycling system which retrieved the silicon and abrasive from solar cell wafer slicing. The basic process of the recycling system was multiple centrifuge and secondary processes of ultra sonic agitation, addition of alcohol-water solution and heating sludge was added for raising separation efficiency. The recycling rate was about 96% and 94% for 2N, 4N silicon respectively. The SiC abrasive recycling rate was about 80%. To retrieve the high purity of 4N silicon, the heat process in vacuum furnace was added to remove remaining impurity components.

• Clean Technology
• /
• v.22 no.4
• /
• pp.274-280
• /
• 2016

In this study, it was to develop a chemical method that can recycle the cutting oil which accounts for about 25% of the cost of the process among containing materials of silicon waste sludge generated in the process for producing a solar cell wafer. The 7 types of reagents have been used, including acetone, HCl, NaOH, KOH, $Na_2CO_3$, HF, $CH_2Cl_2$, etc. for this experiment. And It was carried out at a speed of 3000 rpm for 60 minutes centrifugation after performing a reaction with a waste sludge at various concentrations. As a result, the best reagents and conditions for separating the solid such as a silicon powder and a metal powder and liquid cutting oil were identified as 0.3 N NaOH. It is found to be pH 6.05 in a post-processing recycled cutting oil with 0.3 N NaOH after reaction of waste sludge and 0.1 N HCl which is effective to remove metal powder in order to adjust the pH to suit the properties of the weak acid is a commercially available cutting oil and it showed excellent turbidity than when applied to sludge with 0.3 N NaOH alone. The results of FT-IR analysis which can compare the properties of the commercially available cutting oil shows it has a possibility of recycling oil. The cutting oil recovery rate obtained through the experiment was found to be 86.9%.