• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.106-111
• /
• 2010

Magneto-rheological elastomers (MREs) were manufactured by incorporation of magnetic responsible powder (MRP) into natural rubber and silicone rubber. The optimum loading amounts of MRP was 30 vol.% and the natural rubber based MRE (NR-MRE) showed better mechanical property than that of silicone rubber based MRE (S-MRE). However, the modulus shift ratio caused by S-MRE, measured by Self-modified Electromagnet Applied Fast Fourier Transform Analyser (SEFFTA), was higher than that of NR-MRE. The modulus shift ratio caused by NR-MRE was 10%, while the modulus shift ratio caused by S-MRE was 35.7%. The modulus shift ratio could be improved by orienting the magnetic direction of MRP before crosslinking the MRE. The degree of orientation of MRP was analyzed using SEM.

• Rubber Technology
• /
• v.3 no.2
• /
• pp.131-144
• /
• 2002

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1652-1654
• /
• 2004

초고압 지중 케이블을 전기적, 기계적으로 연결하는 역할을 하는 중간 접속함은 미가교 폴리에틸렌을 사용하여 현장에서 가교시키는 TMJ(tape molded Joint), 에폭시와 EPDM고무의 복합 절연구조를 가지고 있는 PJ(Prefabricated Joint), 그리고 EPDM또는 실리콘 고무를 단독으로 사용하는 PMJ(Premolded Joint)로 대표된다. 그러나 TMJ는 현장에서 가교하는 방식으로 조립 후 품질을 파악하기가 쉽지 않으며 PJ는 공장에서 미리 성형한 제품을 현장에서 조립만 하면 되는 구조이나 그 부품의 수가 많고, 이종 계면을 가지고 있는 복합절연구조를 가지고 있어 최근에는 부품의 수도 적고 조립이 간편하며 이종 계변의 수를 최소화하여 전기적 안정성을 높인 조립형 접속함인 PMJ를 선호하는 경향을 보이고 있다. 본 논문에서는 PMJ용으로 사용되는 실리콘 고무의 절연과 반도전 계면에서의 접착력과 전기적 파괴 특성간의 상관 관계를 규명하였고 또한 실리콘 고무의 상온 및 고온에서의 AC 및 Impulse 전압의 특성 변화와 Impulse 전압의 극성효과에 대해 규명하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.46-49
• /
• 2003

Microsystem technology (MST) which originated from semiconductor processes has been widely spreaded into tile other industry such as sensors, micro fluidics and displays. The MST, however. has been troubled in spreading with its high cost and material limitations. So, in this paper, new process for micromolding technology using silicone rubber mold was introduced. Silicone rubber mold, which was fabricated by vacuum casting. can be transferred a master pattern to a final product with the same shape but different materials. In order to verify the possibility of application of silicone rubber mold to the MST, its transferability was evaluated. and then it applied to the fabrications of polishing pad and PDP barrier ribs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1380-1387
• /
• 2003

Microsystem technology (MST) which originated from semiconductor processes has been widely spreaded into the other industry such as sensors, micro fluidics and displays. The MST, however, has been troubled in spreading with its high cost and material limitations. So, in this paper, new process for micromolding technology using silicone rubber mold was introduced. Silicone rubber mold, which was fabricated by vacuum casting, can be transferred a master pattern to a final product with the same shape but different materials. In order to verify the possibility of application of silicone rubber mold to the MST, its transferability was evaluated, and then it applied to the fabrications of polishing pad and PDP barrier ribs.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.619-620
• /
• 2007

본 논문에서는 초고압 케이블용 중간접속재의 하나인 프리몰드형 직선접속재의 기본 설계를 바탕으로 당사에서 지난 2006년 네덜란드 KEMA에서 IEC 62067 규격에 맞는 접속재를 개발하여 신뢰성 인증을 받았다. 그 접속재에 저유전율을 갖는 실리콘 고무를 적용했을 때의 전계집중지역의 전계를 완화시키는 방안을 고안하였다. 프리몰드형 직선접속재의 소형화를 위해 고유전율 실리콘 고무와 저유전율 실리콘를 적용하였다. 실제 제품을 생산에 앞서 전계해석 시뮬레이션을 통해 프리몰드형 직선 접속재의 소형화 가능성을 예측해 본다.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.424-429
• /
• 2000

A novel differential pressure sensor has been developed with silicon beams embedded in a silicone rubber membrane. The transducer is usable for most applications involving exposure to harsh media. A piezoresistive differential pressure sensor using silicone rubber membrane has been fabricated on the selectively diffused (100)-oriented n/n+/n silicon substrates by a unique silicon micro-machining technique using porous silicon etching. The pressure sensitivity is about $0.66\;{\mu}V/mmHg$ and the non-linearity is less than 0.1%.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1141-1142
• /
• 2015

실리콘 고무는 옥외용 폴리머 애자 또는 부싱 등에 주로 사용되고 있으며, 이에 대한 연구가 많이 진행되어 지고 있다. 최근에는 나노 기술이 발달함에 따라 전기 재료에 나노 사이즈의 필러를 첨가하여 재료의 특정 특성들을 향상시키는 연구들이 진행되어 지고 있다. 본 논문에서는 전기적인 성능을 향상시키고자 나노 사이즈의 $Al_2O_3$를 첨가한 상온 경화형 실리콘 고무에 대한 연구를 진행하였으며, DC 전계와 오염 상황 하에서 연면 파괴 강도를 측정하였으며, 접촉각과 표면 저향률을 측정하였다. 실험 결과, 필러 함량이 증가할수록 연면 절연 파괴 강도와 표면 저항률은 증가하였으며 접촉각은 감소하였다. 또한, 일정 함량 이상에서는 연면 절연 파괴 강도와 표면 저항율이 감소하는 것으로 나타났다.

• Journal of dental hygiene science
• /
• v.10 no.3
• /
• pp.177-183
• /
• 2010

This study was begun to search effect of contact angles of elastic rubber impression materials on the surface of working cast. Of elastic rubber impression materials with a Type III consistency, such as polysulfide, polyether and addition silicone, we selected one and then measured the contact angle after dripping a distilled water 3.3ml. Then, after pouring a dental anhydrite in three types of impression materials, we prepared a working cast and then examined its surface. Contact angle was measured using a full automatic contact angle measuring system (DM-700, KYOWA, Japan), and the surface of working cast was observed using a field emission scanning electron microscope (JSM-6700F, JEOL Ltd., JAPAN). The following results were obtained: 1) $Mean{\pm}SD$ (SD: standard deviation) of the initial contact angles were $91.3{\pm}20.5^{\circ}$ in the addition silicone materials, $90.0{\pm}2.2^{\circ}$ in the polyethers and $101.5{\pm}2.3^{\circ}$ in the polysulfides. These results indicate that mean values were similar but standard deviations of the three materials showed a great discrepancy. 2) As the time elapsed, addition silicone materials were found to have a contact angle decreased abruptly as compared with the remaining two types. That is, the initial contact angle was $91.3^{\circ}$ and it was abruptly decreased to $29.4^{\circ}$ after 25 seconds. 3) In the polyethers, the initial contact angle was $101.5^{\circ}$ and it was decreased to $90.7^{\circ}$ after 25 seconds. In the polysulfides, however, the initial contact angle was $90.0^{\circ}$ and it was $84.2^{\circ}$ after 25 seconds. This showed almost no changes in the initial contact angles. Moreover, its magnitude was greater than that seen in additional silicones. 4) There were significant differences in the contact angles between the three types of elastic rubber impression materials as the time elapsed (p<0.001). On an observation on the surface of working cast, addition silicone materials were found to have the most dense surface. This was followed by polysulfides and polyethers in a descending order.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2256-2258
• /
• 2005

우리는 기존의 현장몰드방식의 TMJ(Tape Molded Joint)와 부품조립방식 의 PJ(Prefabricated Joint) 보다 조립시간과 숙련도가 덜 필요한 고무몰드접속함을 탄성 및 우수한 절연특성을 가진 silicone 고무를 사용하여 조립공정과 절연특성, 탄성특성, 계면특성, 열적 특성 등을 연구하여 개발에 성공하였다. 고무 몰드 접속함은 실리콘 재료의 우수한 탄성에 의해 동일 케이블의 다양한 size에 적용이 가능하다.