• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.7-11
• /
• 1999

In this paper, the result of study in artificial lighting uniformity ratio yield Irethod subjtrt to lecture room are reported. It is desirable that the aWication of equation $\circled1 U=Ei/Ex\times100$ cannot be used to the rrean value in place to be efftrtive of light and darkness. And it is desirable that the awlication of equatioo $\circled2 U=Ei/Ea\times100$ or equation $\circled3 U=(Ea-Ei)/Ea\times100$ be used to the rrean Value equality illumination conditioos. Also, requiring preparation of judgarent standard, uniformity ratio equation agree with actual circumstances in this country. It must be considerai intensity of illumination and specificity of space in established standard.andard.

• Journal of Environmental Health Sciences
• /
• v.43 no.3
• /
• pp.214-222
• /
• 2017

Objectives: A hospital is a complex building that serves many different purposes. The indoor environment in a hospital plays a major role in patient well-being and the work efficiency of the hospital staff. This study was conducted to evaluate overall comfort in two major hospitals over the course of one year. Methods: Various indoor environmental conditions were measured in two general hospitals for one year (April 2014 to April 2015). Monitoring alternated between the hospitals at one month per respective monitoring session. The indoor air temperature, relative humidity (RH), mean radiant temperature and air velocity were measured in order to calculate the predicted mean vote (PMV). Carbon dioxide concentration, noise level and illumination level were concurrently measured and applied to the overall IEQ acceptance model for the hospitals (IEQh). Results: The IEQh at the two general hospitals was different at five spaces within a building. The IEQh for summer and winter were significantly different. Real-time IEQh demonstrated that indoor comfort was affected by the hospital's operating hours due to operation of the HVAC system. The percentage of indoor comfort in the hospitals was higher using PMV than IEQh. Conclusion: IEQh in the hospitals was different at locations with different purposes. Indoor comfort assessment using IEQh was stricter than with PMV. Additional research is needed in order to optimize the IEQh model.

• Land and Housing Review
• /
• v.13 no.1
• /
• pp.131-140
• /
• 2022

A smart window is a new building material that can realize energy savings in a building. Smart windows can freely adjust Visible Light Transmittance (VLT) and solar gain coefficient (g-value) according to the situation. Smart windows include such technologies as Electrochromic (EC), Suspended Particle Device (SPD), and Polymer Dispersed Liquid Crystal (PDLC). Recent research on building energy savings through the VLT and g-value control functions of smart windows is being actively conducted and meaningful results are being drawn. However, since most of the research is focused on energy savings, research on the indoor environment is somewhat lacking. A building is a space where people live and the comfort of life should be prioritized before energy savings. Therefore, in this study, analysis on the daylight performance of an office space was carried out. Through green building standards such as LEED, BREEAM, CASBEE, and G-SEED, the daylight performance was reviewed according to VLT value changes of the smart window. In addition, a study was conducted on the VLT range of the electrochromic façade that can maintain a comfortable indoor environment. The smart window used electrochromic control with a wide range of VLT. The study showed that the minimum VLT of a smart window that can satisfy G-SEED is 25% or more. In addition, it was found that the VLT change of the electrochromic smart window did not significantly affect the uniformity of the room. When the LEED standard was applied, the minimum VLT value of the electrochromic smart window that must be maintained according to each orientation of the building was derived.

• Korean Institute of Interior Design Journal
• /
• v.13 no.2
• /
• pp.120-132
• /
• 2004

고령사회 2001의 발표에 의하면, 노년인구의 증가는 전 세계적으로 21세기까지 지속될 전망이며, 우리나라도 예외가 아니어서 이에 대한 심각한 사회문제가 예상되고, 이들을 위한 특수주거시설에 대한 환경개선이 요망된다. 본 연구는 노인주거복지시설에서 색채와 조명에 대한 개선방향을 제시하기 위한 것으로, 색채와 조명환경을 정량적, 정성적으로 비교 분석하는데 연구의 목적이 있다. 이를 위해 2003년 2월부터 8월까지 우리나라와 미국의 양로시설 20사례에 대한 현장방문조사가 수행되었고, 모든 시설이 공통적으로 가지고 있는 로비, 복도, 식당, 침실 등 4개 영역이 집중적으로 조사되었다. 1) 색상분포도 조사 결과, 한국시설은 미국 시설과 달리 주조색으로 한색을 많이 사용하고 있으며, 보조색, 강조색의 활용도가 낮은 것으로 나타났다. 2) 색상$\cdot$명도의 간격별 조화 정도에 대한 정량적 평가를 통해 한국시설은 명도대비보다는 색상대비가, 유사조화보다는 대비조화가 두드러졌는데 기능적 측면에서는 이상적이나 친근한 분위기를 만들기에는 한계가 있다. 3) 미도(Aesthetic Measure) 측정 결과, 한국과 미국 시설 모두 평균 이상을 보였는데, 특히 한국시설은 색상 대비 이외에 유사색 조화와 같은 질서요소를 강화시킬 필요가 있다. 4) 한국시설은 미국에 비해 조명 환경이 매우 열악하였는데, 자연채광의 유입은 어느정도 만족스러우나 이를 양질의 조명으로 만들기 방안이 요구된다. 5) 조명방식, 광원유형 등 인공조명에 대한 분석 결과, 한국시설은 매우 단순하며 경제적인 방법에 의존하고 있는데 광원의 선택, 배치, 설치 등 기술적인 보완이 요구된다. 6) 한국시설들의 시설별, 영역별 평균조도는 매우 낮은데, 활동시간대의 권장조도 유지는 물론, 영역 간의 조도 차이를 줄이는 방안이 요구된다.신만의 고유한 해결책으로 발전시키는지를 고찰하고자 한다. 본 논문의 목적은 서울을 사례분석 중 하나로 사용하여 인테리어 디자인 분야의 경계를 대도시로 확장하는 동시에 새로운 적용영역의 가능성을 탐구하는데 있다 하겠다.[C/N]의 값을 나타내었다.다.다.화 기술, 구동방법등에 대한 기술개요와 국내외 기술동향에 대하여 소개하고자 한다.었다.다._{2}$가 0.25[wt%] 첨가된 시편의 20[.deg.C]에서의 유전상수는 16,700으로 최대값을 유전손실을 1.28[%]로 최소값을 나타내었다. 또한 모든 시편은 온도 및 주파수에 따라 유전상수가 완만하게 변화하는 유전이완 특성을 나타내었다.다.수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/mL의 early exponential시기의 세포밀도에서 72시간 배양하였을 대 최대 발현양을 나타내었다. 나타내었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.1-7
• /
• 2008

This study is intended to compare physical properties of fluorescent luminaires with ones of LED luminaires so as to analyze fundamental characteristics of LED luminaires. For this, a comparative analysis of uniformity ratio of illuminance and luminance distribution of these two luminaires was made, and materials for applying LED luminaires to interior construction space were prepared. This study was carried out in four stages. First, a theoretical review on LED illumination light source was made compared with the existing luminaires. Second, a mock-up to control experimental variables to meet the objective of this study was manufactured. Third uniformity ratio of illuminance and luminance distribution of each luminaire were measured by using the mock-up. Fourth, a comparative analysis of uniformity ratio of illuminance and characteristics of luminance distribution of the existing fluorescent luminaires and LED ones was made. As a result of the study, the uniformity ratio of illuminance of LED luminaires, 0.559, was higher than one of the existing fluorescent luminaires, 0.522. Namely, it was shown that illuminance distribution of LED luminaires was uniform and global diffuse was good. As a result of measuring luminance distribution, it was found that luminance distribution of LED luminaires was more uniform than one of the existing fluorescent luminaires. The maximum luminance of fluorescent luminaires and LED luminaires over the wall was $180.6[cd/m^2]$ and $155.26[cd/m^2]$ respectively. Namely, the maximum luminance of fluorescent luminaires was higher than one of LED luminaires. The average luminance of fluorescent luminaires and LED luminaires was $44.32[cd/m^2]$ and $58.65[cd/m^2]$. Like this, the average luminance of LED luminaires was higher than one of fluorescent luminaires. Considering these results, it's thought that LED luminaires can give a person in the room a more comfortable working environment than fluorescent luminaires.

• Journal of Internet Computing and Services
• /
• v.24 no.2
• /
• pp.19-26
• /
• 2023

Humans have adapted and evolved to natural light. However, as humans stay in indoor longer in modern times, the problem of biorhythm disturbance has been induced. To solve this problem, research is being conducted on lighting that reproduces the correlated color temperature(CCT) of natural light that varies from sunrise to sunset. In order to reproduce the CCT of natural light, multiple LED light sources with different CCTs are used to produce lighting, and then a control index DB is constructed by measuring and collecting the light characteristics of the combination of input currents for each light source in hundreds to thousands of steps, and then using it to control the lighting through the light characteristic matching method. The problem with this control method is that the more detailed the steps of the combination of input currents, the more time and economic costs are incurred. In this paper, an LED lighting control method that applies interpolation and combination calculation based on the minimum spectral power distribution information for each light source is proposed to reproduce the CCT of natural light. First, five minimum SPD information for each channel was measured and collected for the LED lighting, which consisted of light source channels with different CCTs and implemented input current control function of a 256-steps for each channel. Interpolation calculation was performed to generate SPD of 256 steps for each channel for the minimum SPD information, and SPD for all control combinations of LED lighting was generated through combination calculation of SPD for each channel. Illuminance and CCT were calculated through the generated SPD, a control index DB was constructed, and the CCT of natural light was reproduced through a matching technique. In the performance evaluation, the CCT for natural light was provided within the range of an average error rate of 0.18% while meeting the recommended indoor illumination standard.

• Sleep Medicine and Psychophysiology
• /
• v.7 no.2
• /
• pp.88-95
• /
• 2000

Objectives: The object of this experiment was to evaluate the effect of sleep deprivation on mood states of normal adults using a subjective scale and an objective scale, minimizing the effect of other factors other than that of sleep deprivation. Methods: Seventy volunteers were first participated in this sleep deprivation schedule, and 36 of them completed this experiment. The subjects and the control group members were all in their early 20's (mean $age=20.8{\pm}1.35$ vs $20.6{\pm}1.10$) and in good health. A log was checked by these subjects from a week before the laboratory study started. Drugs, alcohol and beverages containing any caffeine had been prohibited for a week before and during sleep deprivation periods. The study was performed only in summer to control other factors like sunlight, temperature and moisture. Before this experiment, the subjects had slept adequately for a week at least. On day 1 of the experiment the subjects got up at 6 a.m. and stayed in a sleep laboratory without sunlight or external noises. They could only go about their daily routines. They were forbidden to have a nap and be drowsy. GVA (Global Vigor and Affect) and MADRS (Montgomery-Asberg Depression Rating Scale) were checked 11 times. The data was analysed focusing on the changing mood states. Results: The mood during sleep deprivation became worse as the sleep deprivation time progressed. Especially 20 hours ($GA=59.25{\pm}8.06$, $MADRS=3.43{\pm}1.25$) and 40 hours ($GA=38.83{\pm}9.22$, $MADRS=6.08{\pm}1.46$) after sleep deprivation, there were significant changes compared to the control group ($MADRS=6.08{\pm}1.46$ vs $1.07{\pm}1.18$, p<0.001). Conclusions: While controlling factors other than sleep deprivation might have had some influence on mood changes, significant mood changes during sleep deprivation were observed. The mood states became worse as the sleep deprivation progressed.