• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.526-527
• /
• 2013

기존의 발열유리 온도 제어 방법은 PTC Type 또는 NTC Type 의 온도센서를 발열유리에 부착하여 발열유리온도를 검지하여 제어를 한다. 온도센서가 발열유리 표면에 부착됨으로써 온도센서박스 및 온도센서용 통신선로가 추가적으로 필요하다. 또한 외관과 시야가 나빠진다. 이런 문제점을 해결하기 위해 본 논문에서는 실내의 온도와 실외의 온도를 검지하여 유리 표면에 온도센서가 부착하지 않은 발열유리 온도제어시스템에 관한 연구를 하였다. 그리고 실내에서 전열기로 사용하는 경우에 한하여 온도센서리스 방식의 발열유리 온도제어시스템에 관한 연구 및 실험을 하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.3 s.25
• /
• pp.97-107
• /
• 2007

The purpose of this study is to grasp the characteristic of indoor thermal environment from large enclosures in connection with heating condition and outdoor environment. This study has measured indoor thermal environment in accordance with heat loads from occupant for large enclosures in winter. We examined indoor thermal environment of the large enclosures in this study which include temperature distribution vertical, horizontal, seat and surface and thermal comfort environment.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.1
• /
• pp.51-56
• /
• 2019

This paper presents a method to deice concrete pavement with carbon nanotube(CNT) as an heating material so as to avoid the adverse effects of conventional deicing method such as salt on the structure, function and environment. To this end, laboratory tests integrated with numerical simulations were conducted. In the laboratory tests, the CNT was embedded inside the concrete slab and generated the heat up to the target temperature of $60^{\circ}C$ in the freezer at temperature of $-10^{\circ}C$. Then, the surface temperature was measured to investigate how far the heat transfers on the surface at temperature of above $0^{\circ}C$. Also, three different spacings of 15, 20 and 30cm between CNTs were conducted to determine the maximum allowable spacing of CNT. Along with these experimental tests, heat transferring analysis conducted to validate the test results.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.925-930
• /
• 2008

As office automation appliances and communication equipments are adopted in office buildings, internal heat gains increase gradually. When making simulation model, internal heat gains are usually set up with standard values or ignored. Therefore, the impact of the internal heat gains has been ignored or not been focused although it is recognised as significant contributor to heating/cooling load of buildings. This study focused on the impact of internal heat gains on curtain wall buildings. the amount and schedules of heat internal gains profiles not only affect the profiles of heating/cooling loads, but also make impact on reducing the effectiveness of high performance glazing systems. It is important to identify internal heat gains profiles before considering the installation of high performance glazing systems.

• Electric Engineers Magazine
• /
• v.237 no.5
• /
• pp.49-53
• /
• 2002

일반 사무용 빌딩에서는 타이프라이터, 복사기, 탕불기 등의 기기류가 공장에서는 기계, 장치류가 발열체로서 실내에 설치되어 있으며 이들의 기기류에 대한 연료 또는 전력에 의한 입력에너지는 모두 최종적으로 열에너지로 변환되어 방출되고 있다.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.117-122
• /
• 2015

Purpose: Generally, 30% of the total energy consumption in office building is used for artificial indoor lightings, and almost 75-85% of electric power in fluorescent and Light-Emitting Diode (LED) lightings can be dissipated as a form of heat into indoor environment. The heat generated by indoor lightings can cause the increase of cooling load in office buildings. Thus, it its important to consider indoor lightings as a heat and light source, simultaneously. Method: In this study, we installed two kinds of indoor lightings including fluorescent and LED lightings and measured surface temperature of both indoor lightings. In addition, we obtained ambient temperature of indoor space and finally calculated total heat dissipated from plenum area and surface of lightings. Result: Total indoor heat gain was 87.17Wh and 201.36Wh in cases of six 40W-LED lightings and 64W-fluorescent lightings, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.59-63
• /
• 2017

In the cold region, road surface is frequently frozen, resulting in property/facility damage as well as people's death. In order to prevent the road surface from being frozen, conventional deicing methods such as salt, geothermal, and electric wires have been widely used. However, theses methods have some problems such as anti-environment, high-construction and -maintenance cost and so on. To improve the drawbacks of aforementioned methods, carbon nanotube (CNT) was used as an heating material in the laboratory test. Through the test, heat transferring effect of CNT on the concrete slab was investigated and maximum interval of CNT installation was determined.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.520-525
• /
• 2009

본 연구에서는 실내 내장재료 많이 사용되고 있는 벽지를 대상으로 선정하여 연소특성을 고찰하고자 콘 칼로리미터, 연기밀도 시험기, 발화점 시험기, 산소지수 시험기를 이용하여 각각의 발열성, 발연성, 착화성, 난연성을 측정하였다. 벽지의 발열특성은 기능성 벽지인 쑥벽지와 특정벽지인 질석벽지가 다른 벽지에 비해 많은 열을 방출하는 것으로 나타났으며, 방염벽지의 연기밀도가 130.8로 가장 높은 값을 나타냈다. 질석벽지는 61초에 착화가 되어 다른 벽지에 비해 착화시간이 최소 4배 이상 늦게 착화가 되었으며, 발화온도 또한 270.8$^{\circ}C$로 높게 나타났다. 산소지수측정 범위는 18.9${\sim}$23.2%의 값으로 공기 중의 산소농도와 비슷한 범위인 것을 확인할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.821-828
• /
• 2012

Increasing heat generation in CPUs can hamper effective recirculation and by-pass because of the large temperature difference between the exhaust and the intake air through a server room. This increases the overall temperature inside a data center and decreases the efficiency of the data center's cooling system. The purpose of the data center's cooling system is to separate the intake and exhaust air by controlling the computer room air-conditioner(CRAC). In this study, ICEPAK is used to conduct a numerical analysis of a data center's cooling system. The temperature distribution and the entire room are analyzed for different volumetric flow rates. The optimized volumetric flow rate is found for each CPU power. The heat removal and temperature distribution for CPU powers of 100, 120, and 140 W are found to be the best for a volumetric flow rate of $0.15m^3/s$. The numerical analysis is verified through RTI indicators, and the results appear to be the most reliable when the RTI value is 81.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.28 no.6
• /
• pp.433-442
• /
• 1999

기원전 27세기경, 고대 이집트의 피라미드건설을 위해 앗시리아 지방에서 나일강변으로 이주한 기술자들의 집합주택에는 거의 환기구가 설치되어 있었다는 기록이 있다. 이 환기방법은 실내와 실외의 기온차에 의한 공기의 부력을 이용한 중력환기로 생각된다. 중력환기는 지금도 주물공장 등의 고온, 발열을 수반하는 작업장에서 적용되고 있으며, 이와 같이 자연력을 이용한 환기를 자연환기라 부른다.