• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.77-82
• /
• 2017

This paper related with the VSS_SE-MMA (Varying Step Size_Signed Error-MMA) which possible to improving the equalization performance that employing the varying adaptive step size based on the nonlinearities of error signal of SE-MMA (Signed Error-MMA), compensates the intersymbol interference by distortion occurs at the communication channel, in the transmitting the spectral efficient nonconstant modulus signal such as 16-QAM. The SE-MMA appeared to the reducing the computational arithematic operation using the polarity of error signal in the updating the tap coefficient of present MMA adaptive equalizer, but have a problem of equalization performance degradation. The VSS_SE-MMA improves the problem of such SE-MMA, using the varying step size consider the error signal in the update the adaptive equalizer tap coefficient, and its improved performance were confirmed by simulation. For this, the output signal constellation of equalizer, the residual isi and maximum distortion, MSE and SER were applied. As a result of computer simulation, it was confirmed that the VSS_SE-MMA algorithm has nearly same in convergence speed and has more good performance in every performance index at the steady state.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.111-118
• /
• 1990

In this paper, pSDF-based referance image is realized. Using BJTC (binary joint transform correlator) as the spatial plane correlator, optical pattern recognition for interclass identification and interclass discrimination is performed. Computer simulation shows that the correlation performance of BJTC is superior to that of JTC. Experimental results using BJTC reveal that correlation peak intensity is constant within the error rang from $4.1{\%}\to\9.6{\%}$ in interclass identification and correlation peak intensity of one class is two times higher than that of the other class in interclass discrimination, which indicates its superiority in discrimination sensitivity.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.32-39
• /
• 2009

In this paper, the method of region segmentation using genetic algorithm is proposed for an improvement of efficiency in moving picture coding. A genetic algorithm is the method that searches a large probing space using only a function value for a optimal combination consecutively. By progressing both motion presumption and region segmentation at once, we can assign the motion vector in a image to a small block or a pixel respectively, and transform the capacity of coding and a signal to noise rate into a problem of optimization. That is to say, there is close correlation between region segmentation and motion presumption in motion-compensated prediction coding. This is to optimize the capacity of coding and a S/N ratio. This is to arrange the motion vector in each block of picture according to the state of optimization. Therefore, we examined both the data type of genetic algorithm and the method of data processing to obtain the results of optimal region segmentation in this paper. And we confirmed the validity of a proposed method using the test pictures by means of computer simulation.

• Smart Media Journal
• /
• v.6 no.2
• /
• pp.33-41
• /
• 2017

Railway point machines act as actuators that provide different routes to trains by driving switchblades from the current position to the opposite one. Since point failure caused by the aging effect can significantly affect railway operations with potentially disastrous consequences, replacement detection of point machine at an appropriate time is critical. In this paper, we propose a replacement condition detection method of point machine in railway condition monitoring systems using electrical current signals, after analyzing and relabeling domestic in-field replacement data by means of OLAP(On-Line Analytical Processing) operations in the multidimensional data cube into "does-not-need-to-be replaced" and "needs-to-be-replaced" data. The system enables extracting suitable feature vectors from the incoming electrical current signals by DWT(Discrete Wavelet Transform) with reduced feature dimensions using PCA(Principal Components Analysis), and employs SVM(Support Vector Machine) for the real-time replacement detection of point machine. Experimental results with in-field replacement data including points anomalies show that the system could detect the replacement conditions of railway point machines with accuracy exceeding 98%.

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.93-99
• /
• 2024

The digital medical imaging, especially, computed tomography (CT), should necessarily be considered in terms of noise distribution caused by converting to X-ray photon to digital imaging signal. Recently, the denoising technique based on deep learning architecture is increasingly used in the medical imaging field. Here, we evaluated noise reduction effect according to various noise types based on the U-net deep learning model in the lung CT images. The input data for deep learning was generated by applying Gaussian noise, Poisson noise, salt and pepper noise and speckle noise from the ground truth (GT) image. In particular, two types of Gaussian noise input data were applied with standard deviation values of 30 and 50. There are applied hyper-parameters, which were Adam as optimizer function, 100 as epochs, and 0.0001 as learning rate, respectively. To analyze the quantitative values, the mean square error (MSE), the peak signal to noise ratio (PSNR) and coefficient of variation (COV) were calculated. According to the results, it was confirmed that the U-net model was effective for noise reduction all of the set conditions in this study. Especially, it showed the best performance in Gaussian noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.914-920
• /
• 2006

In this paper, we introduce a new partial transmit sequence (PTS) orthogonal frequency division multiplexing (OFDM) scheme with low computational complexity. In the proposed scheme, $2^n$-point inverse fast Fourier transform (IFFT) is divided into two parts. An input symbol sequence is partially transformed using the first l stages of IFFT into an intermediate signal sequence and the intermediate signal sequence is partitioned into a number of intermediate signal subsequences. Then, the remaining n - l stages of IFFT are applied to each of the intermediate signal subsequences and the resulting signal subsequences are summed after being multiplied by each member of a set of W rotating vectors to yield W distinct OFDM signal sequences. The one with the lowest peak to average power ratio (PAPR) among these OFDM signal sequences is selected for transmission. The new PTS OFDM scheme reduces the computational complexity while it shows almost the same performance of PAPR reduction as that of the conventional PTS OFDM scheme.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.612-621
• /
• 2008

Due to the various constraints such as feasible size of data payload and low transmission power, no technical specifications on the voice communication are included in the Zigbee standard. In this paper, a voice coding technique for application to the IEEE 802.15.4 standard, which is the basis of Zigbee communication, is presented. Here, both high compression and good waveform recovery are essential. To meet those requirements, a multi-stage discrete wavelet transform (DWT) block and a binary coding block consisting of two different pulse-code modulations are exploited. Theoretical analysis and simulation results in an indoor wireless channel show that the voice coder with 2-stage DWT is most appropriate from the viewpoint of compression and waveform recovery. When the line-of-sight component is dominant, the voice coding scheme has good recovery capability even in the moderate signal-to-noise power ratios. Hence, it is considered that the presented scheme will be a technical reference for the future recommendation of voice communication exploiting Zigbee.

• Progress in Medical Physics
• /
• v.5 no.2
• /
• pp.27-34
• /
• 1994

In this study, we developed E.C.G telemetry system by using a digital communication method. This system is composed of a number of Ambulatory Telemetry System(ATS)'s that use for the same frequency and one center monitoring system(CMS) utilized the personal computer. The purpose of the ATS is, Therefore, to present for acqusition ECG data and transmitting to CMS. The ATS hardware is based on one chip microprocessor (8096) included A/D convert, ECG pre amplifier, ID-decoder, TRX Gateway and FM TRX module. Using the PC can be convinet to processing and deposite for long terms continued patient data.

• The KIPS Transactions:PartB
• /
• v.8B no.6
• /
• pp.693-698
• /
• 2001

Noisy data are often fitted using a smoothing parameter, controlling the importance of two objectives that are opposite to a certain extent. One of these two is smoothness and the other is closeness to the input data. The optimal value of this parameter minimizes the error of the result. This optimum cannot be found exactly, simply because the exact data are unknown. This paper propose the threshold value for noise reduction based on wavelet-thresholding. In the proposed method PSNR results show that the threshold value performs excellently in comparison with conventional methods without knowing the noise variance and volume of signal.

• Geophysics and Geophysical Exploration
• /
• v.19 no.2
• /
• pp.84-90
• /
• 2016

The validation of performance test for newly developed or old-used sensor is very important in the earthquake monitoring and seismology using earthquake data. Especially the frequency response of the sensor is mainly used to correct the earthquake data. The technique of the calculation of phase and amplitude with Hilbert transformation for earthquake data that is filtered with band limited frequency in time domain is applied to calculate the frequency response of the sensor. This technique was tested for the acceleration sensors, CMG-5T of 1g and 2g installed on the vibration table at the laboratory and we could obtain satisfactory result. Tohoku large earthquake in 2011 observed at the station SNU that has accelerometer, ES-T and seismometer, STS-2 operated by KIGAM was also used to test the field data applicability. We could successfully get the low frequency response of broad band sensor, STS-2. The technique by using band limited frequency filter and Hilbert transformation showed the superior frequency response to the frequency spectrum ratio method for noisy part in data.