• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.568-575
• /
• 2016

For the combat survivability, an infrared signature emitted from aircraft is needed to be predicted and analyzed. In this study, we studied the infrared signature from the exhaust plume from the viewpoint of Infrared(IR) detector. The Line-By-Line method using the radiation database is used for radiative property, and radiative intensity analysis is conducted along 1-D line of sight based on the radiative property. The numerical thermo-fluid field for the plume is conducted by ANSYS FLUENT, while setting the lines of sight having the different detection angle on the thermo-fluid field. We found the high IR signature on the line of sight passing through the locally high temperature region of the plume inside, and the strongest signature from the line of sight toward the nozzle surface. Based on this, it confirms the influence of the surface radiative emission on the infrared signature.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.128-137
• /
• 2018

In this paper, we propose a novel class separability measure for radar signals. To reduce the sensitivity of the relative aspect angle between a target and radar, to evaluate the discriminatory power of radar signals, the proposed method first calculates the correlation coefficients between two radar cross sections (RCSs) or linearly shifts one-dimensional (1D) radar signals (i.e., high-resolution range profiles (HRRPs)), or rotates two 2D radar signals (i.e., inverse synthetic aperture radar (ISAR) images). Then, it uses the maximum correlation coefficient when two radar signals are best aligned. Next, the proposed method obtains new correlation-based discriminant matrices (CDM) using maximum correlation coefficients. Finally, the cumulative distribution function (CDF) in the CDM and the value corresponding to the specific probability in the CDF are obtained, and this value represents the discriminatory power of the radar signal. Experimental results show that the proposed method can accurately measure the target separability.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.4
• /
• pp.5-9
• /
• 2019

This paper is to provide the results of a pilot study of the usability and possibility of impact force response signal induced from impacting an object for the assessment of compressive strength of various materials (rock, concrete, wood, etc.) nondestructively. For this study, a device was devised for impacting an object and measuring the impact force. The impact was carried out by an initial rotating free falling impact and following repetitive impacts from the rebound action which eventually disappears. Wood and rock test specimens for different strengths were tested and an impact force response signal was measured for each test specimen. The total impact force signal energy which is assessed from integrating the impact force response signal was compared with the directly measured compressive strength for each specimen. The comparison showed that the total impact force signal energy has a direct relationship with the directly measured compressive strength and the results clearly indicated that the compressive strength of construction materials can be assessed nondestructively using total impact force signal energy which is assessed from integrating the impact force response signal induced from impacting an object.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.31-38
• /
• 2022

An electrocardiogram(ECG) is a recoding of electrical signals of the heart's cyclic activity and an important body information for diagnosing myocardial rhythm. Large amount of information are generated continuously and a significant period of cumulative signal is required for the purpose of diagnosing a specific disease. Therefore, research on compression including clinically acceptable lossy technique has been developed to reduce the amount of information significantly. Recently, wearable smart heart monitoring devices that can transmit electrocardiogram(ECG) are being developed. The use of electrocardiogram, an important personal information for healthcare service, is rapidly increasing. However, devices generally have limited capability and power consumption for user convenience, and it is often difficult to apply the existing compression method directly. It is essential to develop techniques that can process and transmit a large volume of signals in limited resources. A method for compressing and transmitting the ECG signals efficiently by using the cumulative average (template) of the unit waveform is proposed in the paper. The ECG is coded lovelessly using template matching. It is analyzed that the proposed method is superior to the existing compression methods at high compression ratio, and its complexity is not relatively high. And it is also possible to apply compression methods to template matching values.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1115-1122
• /
• 2023

This study aimed to present reasonable reception bandwidth application standards for the purpose of suppressing metal objects during MRI examinations. For this purpose, T2 contrast images were acquired using high-speed spin echo technology on a phantom made of screws for spinal surgery, and metal objects were detected. In addition, images were obtained by increasing the reception bandwidth from 100 Hz/PX to 800 Hz/PX by 100 Hz/PX. The metal artifacts were determined as the sum of the areas of the signal attenuation area and the signal accumulation area. In addition, Pearson correlation analysis was performed to analyze the pattern of metal artifacts according to imaging variables. As a result, the signal accumulation area did not change significantly as the reception bandwidth increased (p>0.05), but the signal loss area and the area of metal artifacts decreased as the reception bandwidth increased (p<0.05). Interestingly, the area of metal objects decreased to a maximum in the section where the reception bandwidth was increased from 100 Hz/PX to 200 Hz/PX, consistent with the section where the echo spacing was reduced to a maximum due to the increase in reception bandwidth. In addition, the correlation analysis results also showed that the eco spacing was more related to the signal attenuation area and the area of metal objects than to the reception bandwidth. Therefore, if the reception bandwidth is increased for the purpose of reducing metal objects, it is reasonable to set it based on a value that minimizes the echo spacing in consideration of image quality factors.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1802_1803
• /
• 2009

위치추정은 현재 이동로봇 분야에서 매우 중요하게 다루어지는 문제이다. RFID 위치추정 시스템은 저렴하고, 오차누적의 위험이 없고, map과 같은 사전정보의 제약이 없기에 범용적으로 사용될 수 있다. 하지만 RFID 위치추정에 있어, tag들의 서로 다른 인식거리 차이는 위치추정의 오차를 증폭시키는 역할을 한다. 따라서 이 논문에서는 이를 극복하기 위해 tag들의 인식거리 정보를 활용하여 위치추정을 수행한다. 또한 보다 정확한 위치추정을 위해, 송신신호 전력조절을 통하여, 인식거리를 조절하는 방법을 사용한다. 이들의 성능은 simulation을 통해서 확인하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.470-474
• /
• 2007

U-healthcare는 종래의 헬스케어 영역에 유비쿼터스 기술을 접목하여 개인의 건강상태 관리를 도와주는 서비스이다. 이의 기반이 되는 기술인 질환 유무를 판별하는 기법은 그 동안 헬스케어 영역에 적용시켜 왔다. 하지만, 적시에 언제 어디서나 지속적인 모니터링이 요구되는 U-health환경에서는 기존의 기계학습기법을 그대로 적용하는 데에는 어려움이 있다. 본 논문에서는 통계기반의 질환 유무 판별 기법을 제안한다. 본 판별 기법은 질환 판별에 이용되는 생체신호와 신체증상의 종류로 배열 구조를 설정하고 축적된 데이터로부터 생체신호와 신체증상간의 쌍에 누적 빈도 수를 기록하여 학습한 뒤 고안한 판별식을 적용시켜 사용자의 질환을 판별하는 기법이다. 제한적인 검증이지만 약 360명의 실제 환자 데이터를 이용하여 기법을 검증하였고, 빠른 속도와 지속적인 개선이 가능한 기법임을 알 수 있었다. 추후 정확한 데이터를 기반으로 다른 기법과의 비교 검증으로 엄밀한 검증이 요구된다.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2392-2394
• /
• 2004

핸드헬드 3차원 동작 추적 장치는 새로운 Human Computer Interaction의 도구로 Wearable Computing, Ubiquitous Computing, 3차원 Game 등의 분야에 요구되어 지고 있다. 본 논문에서는 저가의 관성 센서를 사용한 소형의 핸드헬드 3차원 동작 추적 장치를 설계하였다. 특히, 저가의 관성 센서를 적용하는데 있어 센서신호처리의 문제점을 제시하고, 문제점을 제거하기 위한 신호 처리 방법과 관성센서의 누적오차를 줄이기 위한 방법을 제안하고 실험으로 입증하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.1
• /
• pp.1-8
• /
• 1979

This paper describes a simple asynchronous time dime division multiplexing system developed by means of a synchronous delta modulation. In realizing asynchronous multlplexlng system time author deals with a technique of multiplexing communication channels by reversing the polarity of output pulse and superimposing the channels at a certain time Interval. The results of experiments on the number of error pulses, signal-to-noise ratio and frequency characteristics have shown fair agreements with the theoretically predicted ones related to the system.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.123-124
• /
• 2017

최근에 장시간 근무로 인한 대중교통 운전자들의 부족한 휴식과 수면, 통증, 정신적 스트레스 등은 피로 누적를 초래하여 대중교통 사고의 주요 원인으로 대두되고 있다. 이에 2016년 산업통상자원부 산업융합촉진사업의 일환으로 대중교통 운전자용 다중 생체 신호측정 스마트 의류 및 관련 시스템이 개발중에 있으며 본 논문에는 현재 개발중인 스마트웨어러블 의류의 내세탁성능에 대한 성능 시험방법을 제안하고자 한다. 성능시험 방법은 국내외 생체신호측정 스마트 의류의 care label(취급표시사항)을 통하여 hand wash의 조건으로 세탁을 표시하고 있으나, 1년의 warranty를 위한 시험을 위해서는 오랜기간이 필요하기 때문에, 좀더 가혹한 조건으로 진행하여 시간을 줄이고, 고객의 빠른 시장출시를 지원하도록 시험방법을 제안하였다.