• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.2
• /
• pp.1-13
• /
• 1999

As the complexity of DSP (Digital Signal Processing) applications increases, the need for new architectures supporting efficient high-level language compilers also grows. By combining several DSP processor specific features, such as single cycle MAC (Multiply-and-ACcumulate), direct memory access, automatic address generation, and hardware looping, with a RISC core having many general purpose registers and orthogonal instructions, a high-performance and compiler-friendly RISC-based DSP processors can be designed. In this study, we develop a code-converter that can exploit these DSP architectural features by post-processing compiler-generated assembly code, and evaluate the performance effects of each feature using seven DSP-kernel benchmarks and a QCELP vocoder program. Finally, we also compare the performances with several existing DSP processors, such as TMS320C3x, TMS320C54x, and TMS320C5x.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.6
• /
• pp.35-41
• /
• 2000

This paper describes a merged-capacitor switching (MCS) technique to improve the signal Processing speed and resolution of CMOS analog-to-digital converters (ADCs). The proposed MCS technique improves a sampling rate by reducing the number of capacitors used in conventional pipelined ADCs. The ADC capacitor mismatch can be minimized without additional power consumption, die area, and the loss of sampling rate, when the size of each unit capacitor is increased as much as the number of capacitors reduced by the MCS technique. It is verified that the ADC resolution based on the proposed MCS technique is extended further by employing a conventional commutated feedback-capacitor switching (CFCS) technique.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.459-466
• /
• 2000

A new control method for precision robust speed control of a PMSM(Permanent Magnet Synchronous Motor) using load torque observer is presented. Using this system, we can more precisely evacuate of vestibular function. Until now a rotating chair system, so called 2D-stimulator, which has vertical rotate axis is used to make dizziness. However, an inclined rotating chair system witch is called 3D-stimulator is needed to obtain the precise dizziness data. This 3D-stimulator include unbalanced load caused by unbalanced center of mass. In this case, new compensation method is considered to obtain robust speed control using load torque observer. To reduce the effect of this disturbance, we can use dead-beat observer that has high gain. The application of the load to torque observer is published in for position control. However, there is a problem of using speed information such as amplifying effect of noise. Therefore, we can reduce a noise effect by moving average process. The experimental results are depicted in this paper to show the effect of this proposed algorithm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.93-103
• /
• 2002

A new current mirror for high-accuracy current-mode signal processing and integrated circuit design was proposed. The current mirror adopts the technique of an adaptive feedback to reduce the input impedance and the output stage of regulated cascode current mirror to increase the output impedance. Simulation results show that the current mirror has input impedance of 0.9Ω, the output impedance of 415 MΩ, and current gain of 0.96 at the supply voltage Vcc=5V. The power dissipation is 1.5㎽. In order to certify the applicability of the proposed current mirror, a voltage-to-current converter using the current mirror is designed. Simulation results show that the converter has good agreement with theoretical equation and has three times better conversion characteristics when compared with voltage-to-current converter using Wilson current mirror.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.1
• /
• pp.13-18
• /
• 2000

Low temperature co-fired ceramics on metal (LTCC-M) is efficient for embedding passive components with good tolerance in a module due to the dimensional stability in x and y directions by the constraint of metal core during the firing. In addition, the radiation noise can be reduced by metal core. In this paper, embedded passive components were introduced and a power amplifier module (PAM) fabricated by using the passive components was explained. The embedded passive components in test patters showed the tolerance of 10~20% and the good repeatability in tolerance of embedded passives was maintained in module fabrication. The shortened traces in multi chip modules (MCMs) make the signal delay time decreased and the embedded passives simplify the packaging processes owing to the less solder points, which enhance the electrical performance and increase the reliability of the modules. The LTCC-M technology is one of the promising candidates for RF application and is expected to expand its applications to power and high performance devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.129-132
• /
• 2003

In this paper, which sees the Strong-ARM SA1110 it used the main CPU and RTP in VoIP system. It will be able to apply the information communication field it embodied. It used the Tynux_box2 with the hardware side and it composed a VOIP system. And it used the RTP which is a real-time protocol in software control portion. The development environment of the paper that used the Target board and a Linux PC for connection used the RS-232C, USB connection, Ethernet LAN. The VoIP the environment for a communication used the wave file in the substitution which changes analog signal with the digital signal. And For the communication of the both sides it used the socket. This paper explained the fact that against a general technique from the operation of VoIP system. Using the Embedded linux development board which explained an operational process of the RTP protocol.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.118-128
• /
• 1999

There are many ultrasonic measurement methods that are used in nondestructive testing applications. Some typical applications include material property determination, microstructural characterization. and flaw detection. Ultrasonic parameters such as velocity and attenuation are most commonly required in these applications. The accuracy and repeatability of testing results are dependent on both the hardware used to generate and receive the ultrasonic waves and on the analysis software for calculating these parameters. In this study, five analysis algorithms were implemented on a computer for measuring wave speed in a pulse echo. immersion testing configuration. In velocity measurements comparisons were made between the overlap. cross-correlation. Fourier transform. Hilbert transform, wavelet transform algorithms. Velocity measurement was applied to an isotropic steel sample using the five analysis algorithms. Frequency-dependent phase/group velocity and attenuation were also measured using the Fourier transform and wavelet transform algorithms on a composite laminate containing voids.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.55-65
• /
• 2002

Wavelet transform has recently emerged as a promising technique for video processing applications due to its flexibility in representing non-stationary video signals. Motion estimation which uses wavelet transform of octave band division method is applied In many places but if motion estimation error happens in the lowest frequency band. motion estimation error is accumulated by next time strep and there has the Problem that time and the data amount that are cost In calculation at each steps are increased. On the other hand. wavelet packet that achieved the best image quality in a given bit rate from a rate-distortion sense is suggested. But, this method has the disadvantage of time costs on designing wavelet packet. In order to solve this problem we solved this problem by introducing Top_down method. But we did not find the optimum solution in a given butt rate. That image variance can represent image complexity is considered in this paper. In this paper. we propose a fast multiresolution motion estimation scheme based on the adaptive wavelet transform for video compression.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.669-678
• /
• 2002

Currently, the domestic interests on the development of eyesight related measuring instruments are being increased. So we are developing such an electronic system of Refracto-keratometer, which contains a software and a hardware both. If this system could inform the examiner of the precise eyesight measuring result from the treatment of the image of optical system, then potentially the number of missed measuring results could be reduced. Our electronic system has been developed from the two areas divided into a software and a hardware. The software area was focused on the more exact eyesight measuring results, using morphological filtering methods and gray-leveled signal enhancing techniques. The hardware area is performing the same functions as the existing other systems. Besides, it provides the embedded software with free variables which could reduce the developing duration sharply as well as enlarge many kinds of application-extensions. Therefore, this electronic system has made effective eyesight measurement possible as the result of reducing the differences applied to sophisticated eyesight measurement.

• Journal of KIISE:Software and Applications
• /
• v.28 no.9
• /
• pp.649-661
• /
• 2001

While the conventional edge detection can be considered as the problem of determining the existence of edges at certain locations, the fuzzy edge modeling can be considered as the problem of determining the membership values of edges. Thus, if the location of an edge is unclear, or if the intensity function is different from the ideal edge model, the degree of edgeness at the location is represented as a fuzzy membership value. Using the concept of fuzzy edgeness, an automatic smoothing parameter evaluation and selection method for a conventional edge detector is proposed. This evaluation method uses the fuzzy edge modeling, and can analyze the effect of smoothing parameter to determine an optimal parameter for a given image. By using the selected parameter we can detect least ambiguous edges of a detection method for an image. The effectiveness of the parameter evaluation method is analyzed and demonstrated using a set of synthetic and real images.