• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.68-76
• /
• 2010

Touch-enabled technology is increasingly being accepted as a main communication interface between human and computers. However, conventional touchscreen technologies, such as resistive overlay, capacitive overlay, and SAW(Surface Acoustic Wave), are not cost-effective for large screens. As an alternative to the conventional methods, we introduce a newly emerging method, an optical imaging touchscreen which is much simpler and more cost-effective. Despite its attractive benefits, optical imaging touchscreen has to overcome some problems, such as heavy computational complexity, intermittent ghost points, and over-sensitivity, to be commercially used. Therefore, we designed a hardware controller for signal processing and multi-coordinate computation, and proposed Infrared-blocked DA(Dark Area) manipulation as a solution. While the entire optical touch control took 34ms with a 32-bit microprocessor, the designed hardware controller can manage 2 valid coordinates at 200fps and also reduce energy consumption of infrared diodes from 1.8Wh to 0.0072Wh.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.420-428
• /
• 2012

One of the most important means in modern NQ emphasized smart society is the communication skill. Especially, effects on improving pronunciation accuracy, it is mostly necessary to accurately express his or her own idea due to the personal relation influence 38% of voice. For this, this paper proposed the voice influence analysis of carbonate drink and eucalyptus fragrance. In particular, in the case of carbonate drink, the amounts of drinking accumulation is verified for analysing the drinking accumulation influence. Also, eucalyptus fragrance is reported for influencing the pronunciation accuracy. For this, jitter, shimmer, pitch and intensity of voice is analyzed. Finally, we accomplish an voice analysis of quantization, objective and visualization for such carbonate drink and eucalyptus fragrance.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.187-194
• /
• 2011

IEEE 802.11 wireless LAN has become the center of attention for one of the most dominant wireless networking technologies nowadays. In densely deployed wireless LANs, mobile stations are exposed to a number of AP, thus it is needed to select the best AP to associate with. The most common approach is to select the AP with the highest received signal strength. However it does not consider traffic load imposed to each AP so that it may cause the poor network performance. Therefore, in this paper, we propose a throughput estimation scheme for neighboring APs by sniffing the traffic within 802.11 networks. We devise a tool, named "VirtFrame", which is to estimate the station's capable throughput from neighbor APs based on the channel access time by virtually combining the sniffed frames. Simulation results show that our proposed scheme well matches that there exists correlation between the channel access time and the actual throughput of the APs.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.321-330
• /
• 2002

A 2-D median filter has many applications in various image and video signal processing areas. The rapid development in VLSI technology makes it possible to implement a real-time or near real-time 2-D median filter with reasonable cost. For the efficient VLSI implementation, the algorithm should have characteristics such as small memory requirements, regular computations, and local data transfers. This paper presents an architecture of the real-time two-dimensional separable median filter which has appropriate characteristics for the VLSI implementation. For the efficient two-dimensional median filter, a separable two-dimensional median filtering structure and a bit-sliced pipelined median searching algorithm are used. A behavioral simulator is implemented with C language and used for the analysis of the presented architecture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.291-298
• /
• 2019

In this paper, we propose a Fresnel transform method using various wavelet functions to efficiently decompose digital holograms. After implementing the proposed wavelet function-based Fresnelet transforms, we apply it to the digital hologram and analyze the energy characteristics of the coefficients. The implemented wavelet transform-based Fresnelet transform is well suited for reconstructing and processing holograms which are optically obtained or generated by computer-generated hologram technique. After analyzing the characteristics of the spline function, we discuss wavelet multiresolution analysis method based on it. Through this process, we proposed a transform tool that can effectively decompose fringe patterns generated by optical interference phenomena. We implement Fresnelet transform based on wavelet function with various decomposition properties and show the results of decomposing fringe pattern using it. The results show that the energy distribution of the coefficients is significantly different depending on whether the random phase is included or not.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1325-1332
• /
• 2009

In this paper, we design a 2.4 GHz bio-radar system that can detect human heartbeat and respiration signals with small size and improved noise performance using single circular-polarized antenna and phase-locked loop. The demonstrated bio-radar system consists of single circular-polarized antenna with $90^{\circ}$ hybrid, low-noise amplifier, power amplifier, voltage-controlled oscillator with phase-locked loop circuits, quadrature demodulator and analog circuits. To realize compact size, the printed annular ring stacked microstrip antenna is integrated on the transceiver circuits, so its dimension is just $40\times40mm^2$. Also, to improve signal-to-noise-ratio performance by phase noise due to transmitter leakage signal, the phase-locked loop circuit is used. The measured results show that the heart rate and respiration accuracy was found to be very high for the distance of 50 cm without the additional digital signal processing.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.5
• /
• pp.171-180
• /
• 2023

The three major sleep disorders in Korea are snoring, sleep apnea, and insomnia. Lack of sleep is the root of all diseases. Some of the most serious potential problems associated with sleep deprivation are cardiovascular problems, cognitive impairment, obesity, diabetes, colitis, prostate cancer, etc. To solve these problems, the Korean government provided low-cost national health insurance benefits for polysomnography tests in July 2018. However, insomnia patients still have problems getting treated in terms of time, space, and economic perspectives. Therefore, it would be better for insomnia patients to be allowed to test at home. The measuring device can measure six biosignals (eye movement, tossing and turning, body temperature, oxygen saturation, heart rate, and audio). A gyroscope sensor (MPU9250, InvenSense, USA) was used for eye movement, tossing, and turning. The input range of the sensor was in 258°/sec to 460°/sec, and the data range was in the input range. Body temperature, oxygen saturation range, and heart rate were measured by a sensor (MAX30102, Analog Devices, USA). The body temperature was measured in 30 ℃ to 45 ℃, and the oxygen saturation range was 0% for the unused state and 20 % to 90 % for the used state. The heart rate measurement range was in 40 bpm to 180 bpm. The measurement of audio signal was performed by an audio sensor (AMM2742-T-R, PUIaudio, USA). The was -42 dB ±1 dB frequency range was 20 Hz to 20 kHz. The measured data was successfully received in wireless network conditions. The system configuration was consisted of a PC and a mobile app for bio-signal measurement and data collection. The measured data was collected by mobile phones and desktops. The data collected can be used as preliminary data to determine the stage of sleep and perform the screening function for sleep induction and sleep disturbances. In the future, this convenient sleep measurement device could be beneficial for treating insomnia.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.215-222
• /
• 2002

This paper presents a reliable fully automatic labeling system which fits well with languages having well-developed syllables such as in Korean. The ASL System utilize DAC (Divide and Conquer), a control mechanism, based segmentation algorithm to use phonetic and acoustic information with greater efficiency. The segmentation algorithm is to devide speech signals into speechlets which is localized speech signal pieces and to segment each speechlet for speech boundaries. While HMM method has uniform and definite efficiencies, the suggested method gives framework to steadily develope and improve specified acoustic knowledges as a component. Without using statistical method such as HMM, this new method use only phonetic-acoustic information. Therefore, this method has high speed performance, is consistent extending the specific acoustic knowledge component, and can be applied in efficient way. we show experiment result to verify suggested method at the end.

• Journal of IKEEE
• /
• v.6 no.2 s.11
• /
• pp.161-168
• /
• 2002

Network of these days, A transmission medium of information is replaced from electric signal to optical signal to accept various and increased network traffic. In this paper, we develop simulation program using AweSim and simulate EPON system as a high-speed optical subscriber network with various conditions. The effects of number of ONUs, effects of network load and effects of slot assignment schemes have been evaluated. The simulation results show that slot assignment schemes and number of ONUs is major factor of network performance. The variable-number slot scheme is more efficient than fixed-length slot scheme in the traffic processing.

• Journal of the HCI Society of Korea
• /
• v.1 no.2
• /
• pp.9-17
• /
• 2006

We propose an EMG-based input interface technology for helping the tetraplegic to utilize mouse, keyboard and power wheelchair. Among possible actions for the tetraplegic utilizing these devices, teeth-clenching is chosen as an input action. By clenching left, right or both teeth, and controlling the clenching duration, several input commands for utilizing the devices can be conducted. EMG signals generated by teeth-clenching are acquired around one's left and right temples and they are used as control sources for utilizing the devices. We develop signal acquisition devices, signal processing algorithms, and prototype systems such as power wheelchair control, mouse control, and game control. Our experimental results with the tetraplegic show that the proposed method is useful for utilizing the devices.