• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.20-28
• /
• 2008

We propose a radial image processing method in a discrete polar coordinate system based on L1-norm. For this purpose, we first verified that the polar coordinate based on L2-norm can not exist in discrete system and then develop a method converting the Cartesian coordinate to the discrete polar coordinate. We apply the proposed method to smooth mass images of breast tissue and to detect the boundaries of extremely deformable objects. Compared to the Gaussian smoothing method performed in the Cartesian coordinate system, the proposed method stabilized the image signal while maintaining the overall radial shape of mass images. The proposed boundary detection method can detect shapes with high precision while conventional edge detectors can not accurately detect the shape of deformable objects. We also exploit the method to perform pupil detection and have had good experimental results.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.219-228
• /
• 2012

As the wireless Internet become more widely accessible, variety of Internet services can be used without limitation of location. However, existing mobility management methods such as MIP and PMIP of IETF requires the load of heavy protocol stack on the mobile nodes or the addition of components such as LMA and MAG. In this paper, we proposed the location management technique in the PMIPv6 and Fast Handover technique. according to the moving pattern of the node, the location management technique proposed in order to adjust the paging area dynamically. The Fast Handover technique applied MIH technology and it reduced the handover signal processing time between heterogeneous network. The location management cost in the environment which the node moves in order to evaluate this and handover delay time was calculate. The proposal technique was efficiently more evaluated than PMIPv6 with the smallest 29% and maximum 83%.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.127-132
• /
• 2020

The Smart Music Learning Device(SMLD) presented in this paper constructs the display part by attaching the touch panel to both sides of the transparent panel. The main processing unit uses raspberry pie, and the operating system uses Android. On the transparent panel, music education contents are displayed, and on the touch panels 1 and 2, the inputs of learners and instructors are accepted. The signal input from the touch panels 1 and 2 controls the progress of the music education contents through a process in the main processing unit. This control process design and implement a two - sided panel - based interactive training algorithm. This device aims at musical education based on mutual understanding. Therefore, it conducts face-to-face education using music education contents presented through transparent panel. This allows the instructor to know in real time the response to the learner, thus improving the understanding of the learning and the quality of the education. Also, the learner's concentration can be improved.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.17-26
• /
• 1998

Ultrasonic sensors are widely used in various applications due to advantages of low cost, simplicity in construction, mechanical robustness, and little environmental restriction in usage. But for the application of object recognition, ultrasonic sensors exhibit several shortcomings of poor directionality which results in low spatial resolution of objects, and specularity which gives frequent erroneous range readings. The time-of-flight(TOF) method generally used for distance measurement can not distinguish small object patterns of plane, corner or edge. To resolve the problem, an increased number of the sensors in the forms of a linear array or 2-dimensional array of the sensors has been used. Also better resolution has been obtained by shifting the array in several steps using mechanical actuators. Also simple patterns are classified based on analyzing signal reflections. In this paper we propose a method of a sensor array system with improved capability in pattern distinction using electronic circuits accompanying the sensor array, and intelligent algorithm based on neuro-fuzzy processing of data fusion. The circuit changes transmitter output voltages of array elements in several steps. A set of different return signals from neighborhood sensors is manipulated to provide enhanced pattern recognition in the aspects of inclination angle, size and shift as well as distance of objects. The results show improved resolution of the measurements for smaller targets.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.105-118
• /
• 2008

Shotcrete is one of the main support materials in tunnelling. Its bonding state on excavated rock surfaces controls the safety of the tunnel: De-bonding of shotcrete from an excavated surface decreases the safety of the tunnel. Meanwhile, the bonding state of shotcrete is affected by blasting during excavation at tunnel face as well as bench cut. Generally, the bonding state of shotcrete can be classified as void, de-bonded, or fully bonded. In this study, the state of the back-surface of shotcrete is investigated using impact-echo (IE) techniques. Numerical simulation of IE technique is performed with ABAQUS. Signals obtained from the IE simulations were analyzed at time, frequency, and time-frequency domains, respectively. Using an integrated active signal processing technique coupled with a Short-Time Fourier Transform (STFT) analysis, the bonding state of the shotcrete can be evaluated accurately. As the bonding state worsens, the amplitude of the first peak past the maximum amplitude in the time domain waveform and the maximum energy of the autospectral density are increasing. The resonance frequency becomes detectable and calculable and the contour in time-frequency domain has a long tail parallel to the time axis. Signal characteristics with respect to ground condition were obtained in case of fully bonded condition. As the ground condition worsens, the length of a long tail parallel to the time axis is lengthened and the contour is located in low frequency range under 10 kHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.57-62
• /
• 2022

Recently, the tracking radar continues research to develop a new operation algorithm that can acquire and track a target in various environments. In general, modeling similar to the real target and environment is used to develop a new operation algorithm, but there is a limit to modeling the real environment. In this paper, a RAW data storage device was developed to efficiently develop a new operation algorithm required for the tracking radar using millimeter wave to acquire and track the target. The RAW data storage equipment is designed so that the signal processing device of the tracking radar using millimeter wave can save the RAW data output from 8 channels to OOOMSPS. RAW data storage equipment consists of data acquisition equipment and data storage equipment. The data acquisition equipment was implemented using a commercial Xilinx KCU 105 Evaluation KIT capable of high-speed data communication interface, and the data storage equipment was implemented by applying a computer compatible with the commercial Xilinx KCU 105 Evaluation KIT. In this paper, the performance of the implemented RAW data storage equipment was verified through repeated interlocking tests with the signal processing device of the millimeter wave tracking radar.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.209-216
• /
• 2009

The repeater for wireless broadband internet (Wibro) system using OFDM demands the short processing delay to eliminate inter-symbol interference resulted from the time delay greater than the guard time. Towards this, the total system delay of repeater is expected to be minimized as possible as it can without distorting signal quality. In general, the FIR-type of filter is commonly deployed as a channelization filter, but due to its large amount of coefficients for producing prerequisite filter response the excessive large time delay occurs. To withstand this problem, the paper proposes the method for designing IIR filter whose response almost identical to that of the original filter. Moreover, in order to linearize the phase response of the designed IIR filter, this paper also introduce the way of designing the all-pass filter to be cascaded works for linearizing phase response of the channelization as well as the de-channelization filter. To achieve the further improvement in linearization of the phase response and reduction of the overall complexity, this paper tries to transform the integrated IIR filter group into the structure in polyphase style. The computer simulation verifies that the integrated IIR filter group designed in this paper reveals the relatively short processing delay without harming the acceptible signal quality.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.68-73
• /
• 2006

This, paper proposes a cosimulation methodology that results in an efficient SoC design as well as fast verification by integrating HDL, SystemC, and algorithm-level abstraction using the design tools Active-HDL and Matlab's Simulink. To demonstrate the proposed design methodology, we implemented the design technique on a serial connection multi-channel speaker system. We have demonstrated the proposed cosimulation method utilizing an ARM processor based SoC Master board with the AMBA bus interface and a Xilinx Vertex4 FPGA. The proposed method has the advantage of simultaneous simulation verification of both software and hardware parts in high levels of abstraction mixed with some performance critical parts in more concrete RTL codes. This allows relatively fast and easy design of a speaker connection system which typically requires significant amount of data processing for verification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.3
• /
• pp.172-178
• /
• 1986

The recent interest in the design of filters is motivatied by the fact that such filter can be fully integrated using standard metal-oxide-semiconductor processing technology. This is due to replacing all the resistors in the active RC filter network by the switched capacitors. The voltage gain of a SC filter depends only on the rations of capacitance and these ratios can be obtained and maintained to high accuracy. Therefore, it is known that a switched capacitor is much better than a resistor in temperature and linearity characteristics. This paper proposed a programmable SC filter and proved the fact that ${omega}_0$ Q and G of this circuit can be controlled by digital signal. Experiments show that SC filter remains the low sensitivities but it can't avoid little influence of parasitic capacitance. As the transfer characteristic of the SC filter is varied with sampling frequency and resistor array, SC filtering technigue can be applied for digital processing, speech analysis and synthesis and so on.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.115-123
• /
• 2002

In this paper, we present two types of vision algorithm that mobile robot has CCD camera. for obstacle avoidance and path plan. One is simple algorithm that compare with grey level from input images. Also, The mobile robot depend on image processing and move command from PC host. we has been studied self controlled mobile robot system with CCD camera. This system consists of TMS320F240 digital signal processor, step motor, RF module and CCD camera. we used wireless RF module for movable command transmitting between robot and host PC. This robot go straight until 95 percent filled screen from input image. And the robot recognizes obstacle about 95 percent filled something, so it could avoid the obstacle and conclude new path plan. Another is complex algorithm that image preprocessing by edge detection, converting, thresholding and image processing by labeling, segmentation, pixel density calculation.