• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.31-36
• /
• 2022

Recently, drones are being used in various fields, and drone technology is also developing. The risks of drones are increasing, then technology to detect drones is important. However, it is extremely difficult to detect and recognize drones due to the low level radar cross section of the commercial drones. In this paper, a signal processor structure that was mounted the miniaturized and light-weighted was designed. in order to process large amounts of data in real time, parallel processing was performed for each channel and an algorithm was applied to shorten the operation time in each step. As a test of verifing the detection performance through test, it was confirmed that the structure design works in real time.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.649-651
• /
• 2012

본 논문에서는 Core-A를 이용한 실시간 영상 신호 처리 SoC 설계와 검증에 대해 기술한다. 영상 신호 처리를 위한 방식으로 SoC를 사용하였으며 영상 처리를 위한 ISP를 설계하였다. 영상 처리를 위한 마이크로프로세서는 코드밀도를 높이고 Verilog HDL을 사용하여 기술되어 여러 응용분야에서 최적화할 수 있는 국내에서 개발된 Core-A를 사용하였다. 본 논문에서 제안한 SoC는 Verilog HDL언어로 설계 되었고, 기본 SoC의 구조는 Core-A, AMBA Bus, ISP, Memory controller, Uart로 구성하였다. 구현된 SoC는 다양한 영상 신호 처리를 지원하여 향후 영상압축 인코더의 실시간 이미지 처리용 소스로 사용할 수 있고 신호 처리 알고리즘 검증용에도 유용하게 사용될 수 있을 것으로 보인다. 설계 검증을 위해 먼저 FPGA를 이용하여 검증하였으며 TSMC $0.18{\mu}m$ CMOS공정으로 합성한 결과 동작주파수는 50MHz, 전체 게이트 수 86.1k로 확인되었다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.192-196
• /
• 2001

This work describes the modeling of cutting process for feedback control based on signal processing in end-milling. Here, cutting force is used to design control model by a variety of schemes which are moving average, ensemble average, peak value, root mean square and analog low-pass filtering. It is expected that each model offers its own peculiar advantage in following cutting force control.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.1
• /
• pp.7-14
• /
• 2000

Recently, the technologies of adaptive noise cancellation(ANC) are developed fast and widely due to the highly sophisticated digital signal processing algorithms and the high-speed communication networks and devices. But, thousand numbers of the adaptive filter taps are required to obtain the satisfying results in the fields of the adaptive noise cancellation and echo cancellation. In the paper, performance comparisons based on the real-time processing between frequency domain adaptive filter(FDAF) and multi-delay frequency domain adaptive filter(MDF) are carried. Those algorithms provide us with the reductions of the computational burdens and the increase of the convergence rate for the lengthy Fill adaptive filters. The time delay due to the long taps of FDAF can be reduced by adopting the MDF algorithms. The conventional ANC and cross talks ANC using FDAF are implemented on the dSP ACE 1103 real-time signal processing board.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1188-1195
• /
• 2012

The trend for the development of radar is the active phased-array radar system. The trade-off between the processing speed and the number of the signal process board for the real time signal processing has to be optimized particularly in multichannel radar system. This paper introduces a transmission technique in order to transmit a large amount of received data from an Antenna Part to Signal Process Part. As a result, the number of the S/L board(COTS board) is reduced to one half, and the margin of the data transmission rate is about 2 times higher than the original method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.805-812
• /
• 2013

The operational flight program(OFP) which has the functions of I/O processing with avionics, flight control logic calculation, fault diagnosis and redundancy mode is embedded in the flight control computer of Smart UAV. The OFP was developed in the environment of PowerPC 755 processor and VxWorks 5.5 real-time operating system. The OFP consists of memory access module, device I/O signal processing module and flight control logic module, and each module was designed to hierarchical structure. Memory access and signal processing modules were verified from bench test, and flight control logic module was verified from hardware-in-the-loop simulation(HILS) test, ground integration test, tethered test and flight test. This paper describes development environment, software structure, verification and management method of the OFP.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.236-242
• /
• 2019

Ultra-wideband(UWB) is a technology that can transmit and receive signals at high speeds using a very short signal of wideband of several GHz, and has been recently used in the field of radar technology. Impulse radio(IR)-UWB radar is used in the field of motion recognition with high resolution. In this work, we studied motion recognition using IR-UWB radar. We constructed a development environment to acquire data about motion and implemented a signal processing algorithm for performance enhancement. Based on the signal processing result, the performance was verified through feature extraction and learning of motion.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.737-747
• /
• 2013

A 3-D surveillance radar is a pulsed-doppler radar to provide various target information, such as range, doppler and angle by performing TWS. This paper introduces HW/SW architecture of radar signal processing board to process in real-time using high-speed multiple DSP(Digital Signal Processor) based on COTS. Moreover, we introduced a implemented algorithm consisted of clutter map creation/renewal, FIR(Finite Impulse Response) filter for rejection of zero velocity components, doppler filter, hybrid CFAR and finally presented computational burden of each algorithm by performing operational test using a beacon.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.130-135
• /
• 2007

This paper deals with a controller design for a 2 dimensional aeroelatic model which has unknown parameters including polynomial type nonlinearity. Actually in case of state and acuator signal having magnitude, rate and bandwidth limitations, the controller can't be implemented and so in each case, a filter is used for implementation. First, error signals are defined upon the backstepping theory, and tracking error signals are also defined due to command signal and filter signals and then compensated tracking error signals are defined. Lastly, a Lyapunov function is defined for the stabilization and from this method, an adaptive law is derived. Simulations are done for the demonstrtion of the effectiveness of the algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.5
• /
• pp.529-538
• /
• 1992

Recently, image signal processing techniques for HDTV signal have been drastically developed. This kind of skill improvement on signal processing need specific memory device for video signal. in this paper, data latch scheme which implements CMOS flip-flop to hold Information from in-put strobe and new reading method is devised to attain a proper access time suitable for HDTY signal. Compared with conventional write scheme, data latch method has two procedures to complete write operation : bit line write and storage cell write, enabling concurrent I /0 operation at the same address. Also, fast read access is possible through the method similar to static column mode and the separated read word line.