• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.6
• /
• pp.1-4
• /
• 1975

This paper dells with the impedance variations of the IMPATT diode depending upon the small a.c. coomponent superimposed on the d.c. bias. The frequency deviation of the modulated wave is measured using a carrier null method on microwave spectrum analyser. Frequency modulation is achieved by the weack a.c. signal superimposed on the d.c. bias. The bandwidth rapidly increase with increasing modulation signal magnitude for constant modulation frquency and slightly decrease with decreasing modulation frequency for constant modulation signal magnitude.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.618-631
• /
• 2012

In this paper polarization adaptivity on transmit has been used to enhance the received signals directed to a pre-selected receiver in a near-field multi-input multi-output (MIMO) environment. The objective here is to select a set of weights on the transmitting antennas adapted to individual receivers based on the principles of reciprocity. Using the polarization properties, when the number of receiving antennas is greater than the number of transmitting antennas, the transmitted signal may be directed more to a particular receiver location while simultaneously minimizing the reception signal strength at other receivers. Numerical simulations have been made to illustrate the novelty of the proposed approach.

• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.78-86
• /
• 2010

The Spectrum Sensing Technology is the core technology of the Cognitive Radio (CR) System that is one of the future wireless communication technologies. In this paper, we proposed the efficient Spectrum Sensing Method using the Short Time Fourier Transform (STFT) that is the algorithm for Time-Frequency analysis of the raw data. Applied window function to STFT algorithm is a Kaiser window, it is piled up its 50% range. For the simulation, the DVB-H signal with the 6MHz bandwidth is used as the Input Signal. And we confirm the Spectrum Sensing result using Modified Periodogram Method, Welch's Method for compared with Short Time Fourier Transform Algorithm. And also, Spectrum Sensing Module is implemented using embedded board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.513-520
• /
• 2010

The degradation phenomenon caused by noises significantly corrupts digitalized data. Therefore, a variety of methods to preserve the edge component of signals and remove noise simultaneously have been used in time domain and frequency domain. In this paper, we have proposed a new noise reduction algorithm using wavelet approximation coefficients to reduce the mixed noise overlapping the signal. The proposed algorithm adopts the distribution characteristics of the error function which is obtained by accumulating the wavelet approximation coefficients, in order to improve the capability to separate edges of the signal and noises.

• Journal of Broadcast Engineering
• /
• v.23 no.3
• /
• pp.421-430
• /
• 2018

Many voice recognition systems use methods such as MFCC, HMM to acknowledge human voice. This recognition method is designed to analyze only a targeted sound which normally appears between a human and a device one. However, the recognition capability is limited when there is a group sound formed with diversity in wider frequency range such as dog barking and indoor sounds. The frequency of overlapped sound resides in a wide range, up to 20KHz, which is higher than a voice. This paper proposes the new recognition method which provides wider frequency range by conjugating the Wideband Sound Spectrogram and the Keras Sequential Model based on DNN. The wideband sound spectrogram is adopted to analyze and verify diverse sounds from wide frequency range as it is designed to extract features and also classify as explained. The KSM is employed for the pattern recognition using extracted features from the WSS to improve sound recognition quality. The experiment verified that the proposed WSS and KSM excellently classified the targeted sound among noisy environment; overlapped sounds such as dog barking and indoor sounds. Furthermore, the paper shows a stage by stage analyzation and comparison of the factors' influences on the recognition and its characteristics according to various levels of noise.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.165-173
• /
• 2006

Network Mobility Basic Support protocol enables mobile network to change their point of attachment to the Internet, but causes some problems such as suboptimal muting and multiple encapsulations. The proposed scheme, combining Prefix Delegation protocol with HMIPv6 concept can provide more effective route optimization and reduce the amount of packet losses and the burden of location registration for handoff. It also uses hierarchical mobile network prefix (HMNP) assignment and provides tree-based routing mechanism to allocate the location address of mobile network nodes (MNNs) and support micro-mobility. In this scheme, Mobility Management Router (MMR) not only maintains the binding informations for all MNNs in nested mobile networks, but also supports binding procedures to reduce the volume of handoff signals oyer the mobile network. The performance is evaluated using NS-2.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.712-722
• /
• 2002

We have investigated a novel optical decoder for a fiber-optic code division multiple access(CDMA) communication systems. The conventional optical encoder and decoder have the advantage of simple structure. However the number of users in the system is limited by the auto- and cross-correlation properties generated in decoding process. In previous studies, to improve the system performance, although they used an optical code that minimize the sidelobe and cross-correlation, could not yet find a novel methods for performance improvement in fiber-optic CDMA system. Thus, it is necessary to investigate the novel optical decode in order to improve the performance of system. In this paper, we schematize the AND gate logic element(AGLE) composed with 1$\times$2 or 1$\times$3 coupler and the optical thyristor and propose the novel optical decoder using K(weight) AGLE. The optical thyristor only passes the overlapped signal and clips other signals. Such a novel concept means that the optical thyristor can operate as a hard-limiter. We analyze the fiber-optic CDMA system using the novel optical decoder with simulation and is found that the novel optical decoder using the AGLE and optical thyristor excludes the sidelobe and cross-correlation intensity between any two sequences.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.3-9
• /
• 2014

Two-way full-duplex relay network provides improved spectral efficiency by using either superposition coding or physical layer network coding at relays compared to conventional two-way half-duplex relay network. In this paper, we investigate the impact of residual loop interference on the performance of the two-way full-duplex relay network. Users and relays in the two-way full-duplex relay network estimate the residual loop interference in order to cancel it. However, it is difficult to perfectly cancel the residual loop interference from the received signal due to the estimation error. Numerical results show the impact of the estimation error on the outage probability of the two-way full-duplex relay network.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.721-732
• /
• 2009

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK signal or QPSK signal as enhanced layer to existing DQPSK signal. The enhanced layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of existing T-DMB service area. But this causes the enhanced layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has powerful error correction capability is applied to the enhanced layer signal of the AT-DMB system for compensating channel distortion. We developed the prototype AT-DMB transmitter and receiver systems for performance evaluation. LAB test for analysing the effect of constellation ratio between existing base layer signal and enhancement layer signal, was conducted and the measurement results are shown with analysis comments.

• Journal of the Korean Magnetics Society
• /
• v.24 no.1
• /
• pp.11-17
• /
• 2014

We measured the ferromagnetic resonance (FMR) signal using the monodisperse iron oxide nanoparticles with size D=4.67 nm, 5.64 nm and 6.34 nm synthesized by using the thermal decomposition method, respectively. The measured ferromagnetic resonance signals were compared with the calculated ones for superparamagnetic nanoparticles with lognormal volume distribution. The FMR linewidth broadening was propositional to tanh($V^2$), where V was volume of nanoparticles. The narrow linewidth of small size nanoparticles was due to the surface spins, while the broad linewidth of large size nanoparticles was due to the bulk spins affected by the crystalline structure of iron oxide nanoparticles. The superposition of surface and bulk effect was confirmed at D=5.64 nm nanoparticles, which was near the critical size for linewidth transition from surface effect to bulk effect.