• Title/Summary/Keyword: 신호변환장치

Search Result 258, Processing Time 0.027 seconds

Algorithm of the gain calibration between each channel at Multiple Channel Electroencephalogram Measurement System (다채널 뇌파 측정 장비의 채널간 이득률 보정 알고리즘)

  • Kim, Pan-Ki;Ahn, Chang-Beom
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.1990_1991
    • /
    • 2009
  • 본 논문은 뇌파와 같이 측정을 위해서 많은 수의 채널이 필요한 계측 장치에서 채널에 따른 증폭률의 차이를 보정하기 위해 동일한 입력을 가한 후 측정된 시간 영역의 신호를 주파수 영역으로 변환하고 주파수 영역에서의 신호를 분석하여 각 채널의 증폭률의 차이를 유도하고 유도된 증폭률의 차이를 보정하는 알고리즘을 소개한다. 본 논문은 다채널 시스템에서 측정된 신호를 주파수 스펙트럼으로 변환하는 단계와 스펙트럼에서 각 채널의 이득률을 분석하는 단계를 포함하는 다채널 시스템에서 채널간 이득률을 보정하는 방법을 제안한다.

  • PDF

Wireless Digital Bit Stream Communication System Using AV Infrared Communication System (AV용 적외선 송수신장치를 이용한 디지털 비트스트림 무선 통신 시스템)

  • 최덕규;한찬호;홍영호
    • Proceedings of the Korea Society for Industrial Systems Conference
    • /
    • 2001.05a
    • /
    • pp.217-223
    • /
    • 2001
  • 본 논문에서는 기존의 AV용 적외선 송수신 시스템을 중간 매체로 이용하고, 그의 대역내에서 디지털 비트스트림을 고속으로 송수신할 수 있는 적외선 무선 데이터 통신 시스템을 제안 및 구현하였다. 제안한 시스템의 송신측에서는 디지털 비트스트림을 NTSC 비디오 신호 규격과 유사한 형태의 아날로그 신호로 변환하고, 이를 기존의 적외선 송신기로 무선 전송한다. 수신측에서는 기존의 적외선 수신기로 아날로그 신호를 수신하고, 이를 다시 디지털 비트스트림으로 변환한다. 본 논문의 결과는 다양한 AV시스템에서 적외선을 이용한 고속 무선 데이터 송수신에 응용될 수 있을 것이다.

  • PDF

The Fabrication of Compact Active Array Antenna for Drone Detection Radar (드론 탐지 레이다용 위상배열안테나 설계 및 구현)

  • Lim, Jae-Hwan;Jin, Hyoung-Suk;Lee, Jong-Hyun
    • Journal of IKEEE
    • /
    • v.25 no.4
    • /
    • pp.703-709
    • /
    • 2021
  • As drone technology advances, the risks of drones are increasing, then technology to detect drones is becoming important. In this thesis, it was verified that miniaturized and lightweighted active array antenna could be used for radar system to detect drones in reality. The transmit-receive module was designed in the form of tile-type to simplify interconnections between devices. The waveform generation module and the down conversion module were miniaturized to include in one body too. As a result of verifing the detection performance through test, it was confirmed that the detection range was over 3.7Km.

Development of Retina Photographing and Multi Channel Image Acquisition System for Thickness Measurement of Retina (망막 두께 측정을 위한 망막 촬영 및 다채널 영상획득장치 개발)

  • 양근호
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.5 no.1
    • /
    • pp.13-17
    • /
    • 2004
  • In order to measure the retina thickness, the retina photographing system and the multi-channel high speed image data acquisition system is developed. This system requires the optical processing techniques and the high speed image processing techniques. The HeNe laser beam is projected the retina in artificial eye and then we sensed the reflected laser signal using APD array. The laser projection system on retina using optical instruments is implemented. In order to project the plane laser beam on retina, laser photographing system used the polygon mirror for horizontal scanning and the galvano mirror for vertical scanning. We acquired retina images in each channel of APD array, transferred computer using PCI interface the image data after real-time A/D converting.

  • PDF

Development of Signal Processing Modules for Double-sided Silicon Strip Detector of Gamma Vertex Imaging for Proton Beam Dose Verification (양성자 빔 선량 분포 검증을 위한 감마 꼭지점 영상 장치의 양면 실리콘 스트립 검출기 신호처리 모듈 개발)

  • Lee, Han Rim;Park, Jong Hoon;Kim, Jae Hyeon;Jung, Won Gyun;Kim, Chan Hyeong
    • Journal of Radiation Protection and Research
    • /
    • v.39 no.2
    • /
    • pp.81-88
    • /
    • 2014
  • Recently, a new imaging method, gamma vertex imaging (GVI), was proposed for the verification of in-vivo proton dose distribution. In GVI, the vertices of prompt gammas generated by proton induced nuclear interaction were determined by tracking the Compton-recoiled electrons. The GVI system is composed of a beryllium electron converter for converting gamma to electron, two double-sided silicon strip detectors (DSSDs) for the electron tracking, and a scintillation detector for the energy determination of the electron. In the present study, the modules of a charge sensitive preamplifier (CSP) and a shaping amplifier for the analog signal processing of DSSD were developed and the performances were evaluated by comparing the energy resolutions with those of the commercial products. Based on the results, it was confirmed that the energy resolution of the developed CSP module was a little lower than that of the CR-113 (Cremat, Inc., MA), and the resolution of the shaping amplifier was similar to that of the CR-200 (Cremat, Inc., MA). The value of $V_{rms}$ representing the magnitude of noise of the developed system was estimated as 6.48 keV and it was confirmed that the trajectory of the electron can be measured by the developed system considering the minimum energy deposition ( > ~51 keV) of Compton-recoiled electron in 145-${\mu}m$-thick DSSD.

Analysis and measurement of the cascadability for 2R O/E/O wavelength converter (Re-timing 기능을 생략한 광/전/광 파장변환기의 cascadability 분석 및 측정)

  • 장윤선;김광준
    • Korean Journal of Optics and Photonics
    • /
    • v.14 no.3
    • /
    • pp.215-218
    • /
    • 2003
  • A 2R O/E/O wavelength converter is useful for bit rate transparency, though it has a limit on cascadability due to timing-jitter accumulation. In this paper, we propose a nonlinear signal model which is more practical than the commonly used sine wave model. With our model, we theoretically analyzed the effects of timing-jitter and the cascadability of a 2R O/E/O wavelength converter. To confirm the theoretical results, we measured the cascadability in a 40-km re-circulation loop for 10 Gb/s signal.

Modeling and Control of Switched Mode Power Module (스위칭 모드 파워 모듈의 이산영역 모델링 및 제어)

  • Kwak, Jae-Hyuk;Lim, Joon-Hong
    • Proceedings of the KIEE Conference
    • /
    • 2000.07d
    • /
    • pp.2675-2677
    • /
    • 2000
  • 본 논문에서는 광대역 입력전압에 대응 할 수 있는 직류 변환 장치(DC-DC Converter)의 제어기의 모델링 및 제어 방법에 대해서 제안한다. 일반적으로 직류 변환 장치의 주된 목적은 입력되는 직류 전압에 대해서 출력전압을 지속적이고 안정적으로 유지해 주는 것이다. 따라서, 안정적인 출력 전압을 얻는 방법으로서 제어되지 않은 직류 변환 장치에 입력전압을 안정적으로 공급해주는 방법도 고려해 볼 수 있으나, 이릴 경우 입력전류의 변화나 입력 전압이 지속적으로 변하는 경우에 대처 하기 어렵다. 따라서, 이러한 문제점들을 해결하기 위해서 출력전압을 궤환 시키고 이 신호에 의해 직류 변환 장치를 제어하는 방법을 고려한다. 또한, 단순한 제어기를 사용할 경우 그 입력전압의 범위가 소자의 한계와 안정성으로 인하여 국한적으로 한정되므로, 이러한 문제를 해결하기 위해 다수의 컨버터를 연결하고 이것을 프로세서를 사용하여 제어하는 방법을 설계한다. 모델링된 직류 변환 장치는 불연속선형 시스템(Piecewise Linear System)으로 해석되어 질 수 있으며, 아울러 각기 다른 입력 범위에서 동작하는 컨버터들에 대해서도 모델링되어야 한다. 또한 일정 간격의 입력 범위내에서 서로 다른 컨버터들을 동작시켜 줄 수 있는 방법도 고려한다. MATLab을 이용하여 파워 컨버터의 성능을 입증하고, 아울러 실제 회로의 실험을 통하여 결과를 검증한다.

  • PDF

Design of RF Front-end for High Precision GNSS Receiver (고정밀 위성항법 수신기용 RF 수신단 설계)

  • Chang, Dong-Pil;Yom, In-Bok;Lee, Sang-Uk
    • Journal of Satellite, Information and Communications
    • /
    • v.2 no.2
    • /
    • pp.64-68
    • /
    • 2007
  • This paper describes the development of RF front.end equipment of a wide band high precision satellite navigation receiver to be able to receive the currently available GPS navigation signal and the GALILEO navigation signal to be developed in Europe in the near future. The wide band satellite navigation receiver with high precision performance is composed of L - band antenna, RF/IF converters for multi - band navigation signals, and high performance baseband processor. The L - band satellite navigation antenna is able to be received the signals in the range from 1.1 GHz to 1.6 GHz and from the navigation satellite positioned near the horizon. The navigation signal of GALILEO navigation satellite consists of L1, E5, and E6 band with signal bandwidth more than 20 MHz which is wider than GPS signal. Due to the wide band navigation signal, the IF frequency and signal processing speed should be increased. The RF/IF converter has been designed with the single stage downconversion structure, and the IF frequency of 140 MHz has been derived from considering the maximum signal bandwidth and the sampling frequency of 112 MHz to be used in ADC circuit. The final output of RF/IF converter is a digital IF signal which is generated from signal processing of the AD converter from the IF signal. The developed RF front - end has the C/N0 performance over 40dB - Hz for the - 130dBm input signal power and includes the automatic gain control circuits to provide the dynamic range over 40dB.

  • PDF

Wireless Transmitter earpiece for Sensibility Ergonomics (감성공학을 위한 무선 이어폰 전송 장치)

  • Lim, Chae-Young;Jeon, Ki-Man;Kim, Kyung-Ho
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2011.06a
    • /
    • pp.273-276
    • /
    • 2011
  • 우리는 감성 공학에 기반하여 일상 생활 속에서 비침습적이면서 사용하기 간편한 광전용적맥파신호를 계측하고 분석하는 이어폰형 생체 신호 측정 시스템에 관하여 연구하였다. 생체 신호 측정 시스템에서는 광전용적맥파(photoplethysmograph, PPG)와 3축 가속도로 생체 신호와 운동 신호를 활용하였다. 수신된 생체 신호인 광전용적맥파 신호는 Peak 검출 및 전처리 알고리즘을 통하여 심박동변동성(heart rate Variablity,HRV)에 대한 시계열 정보로 변환하고 고속 퓨리에 변환(Fast Fourier Transfirm, FFT)과 전력 스펙트럼 밀도 분석(Power Spectrum Density, PSD)방법으로 교감과 부교감 신경 활성도 변화를 관측하였고, 운동 센서로 움직임을 관측하였다. 수신부 시스템은 안드로이드 기반의 자바 어플리케이션으로 스마트 폰에서 구현하였고, 송신부인 이어폰 생체정보 측정모듈로 맥파를 측정하여 상황에 따라 변화하는 자율 신경계의 활성도비율을 확인하였다.

  • PDF

Implementation of Graphic auto-Braille Translation based on Tactile Information Transmission Device for Visually Impaired Person (시각장애인을 위한 촉각정보전달 장치 기반의 그래픽 자동점역 프로그램 구현)

  • Kim, Heung-Gi;Jung, Jung-Il;Cho, Jin-Soo
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2011.04a
    • /
    • pp.467-468
    • /
    • 2011
  • 본 논문에서는 촉각전달장치를 기반으로 수식에 대한 그래프와 도형과 같은 시각교육정보들을 촉각 정보로 자동 변환하여 제공하는 프로그램을 구현하였다. 구현한 프로그램으로는 입력된 그래픽 정보를 촉각정보전달 장치의 해상도에 적합하게 다운샘플링(downsampling)을 수행한 후, 이진화(binarization)를 통해 촉각신호를 생성한다. 그리고 이를 촉각정보전달 장치에 전달하여 출력함으로써, 시각장애인들에게 그래픽 정보를 촉각정보로 변환하여 제공할 수 있다. 결과적으로 본 프로그램을 통해 수학 및 과학과 같은 이공계열의 교육정보를 편리하고 빠르게 촉각정보로 변환하여 시각장애인들에게 제공할 수 있었다.