• Investigative Magnetic Resonance Imaging
• /
• v.8 no.1
• /
• pp.42-49
• /
• 2004

Purpose : The quantization noise in magnetic resonance imaging (MRI) systems is analyzed. The signal-to-quantization noise ratio (SQNR) in the reconstructed image is derived from the level of quantization in the signal in spatial frequency domain. Based on the derived formula, the SQNRs in various main magnetic fields with different receiver systems are evaluated. From the evaluation, the quantization noise could be a major noise source determining overall system signal-to-noise ratio (SNR) in high field MRI system. A few methods to reduce the quantization noise are suggested. Materials and methods : In Fourier imaging methods, spin density distribution is encoded by phase and frequency encoding gradients in such a way that it becomes a distribution in the spatial frequency domain. Thus the quantization noise in the spatial frequency domain is expressed in terms of the SQNR in the reconstructed image. The validity of the derived formula is confirmed by experiments and computer simulation. Results : Using the derived formula, the SQNRs in various main magnetic fields with various receiver systems are evaluated. Since the quantization noise is proportional to the signal amplitude, yet it cannot be reduced by simple signal averaging, it could be a serious problem in high field imaging. In many receiver systems employing analog-to-digital converters (ADC) of 16 bits/sample, the quantization noise could be a major noise source limiting overall system SNR, especially in a high field imaging. Conclusion : The field strength of MRI system keeps going higher for functional imaging and spectroscopy. In high field MRI system, signal amplitude becomes larger with more susceptibility effect and wider spectral separation. Since the quantization noise is proportional to the signal amplitude, if the conversion bits of the ADCs in the receiver system are not large enough, the increase of signal amplitude may not be fully utilized for the SNR enhancement due to the increase of the quantization noise. Evaluation of the SQNR for various systems using the formula shows that the quantization noise could be a major noise source limiting overall system SNR, especially in three dimensional imaging in a high field imaging. Oversampling and off-center sampling would be an alternative solution to reduce the quantization noise without replacement of the receiver system.

• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.85-91
• /
• 1996

일본의 품질 전문가 다구찌가 제안한 파라미터 설계의 장단점에 대해 많은 논의가 있어왔다. 본 연구에서는 신호 대 잡음 비율에 초점을 두어, 이론적 쟁점이 무엇인지를 요약하고, 그 문제점을 모의실험을 통해 구체적으로 지적하였다. 한편 신호 대 잡음 비율에 대한 대안 중에서 Box의 변수변환 방법을 소개하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.291-294
• /
• 2004

본 논문에서는 잡음의 변화(variance)가 없는 정적인 통계적 특성(Stationary Static Characteristic)을 갖는 환경에서 잡음 추정을 통해 지각 필터의 성능을 개선하는 알고리즘을 제안한다. 제안된 잡음 추정 알고리즘은 입력되는 잡음에 열화 된 신호의 묵음 구간에서 추정된 잡음을 이용하여 입력되는 잡음의 SNR을 추정 후, 대역 별로 smoothing 상수 값으로 잡음 에너지를 제어하여 첨가된 잡음을 추정함으로써 초기 추정 잡음 보다 가까운 추정 잡음을 얻을 수 있게 된다. 이는 신호를 열화 시킨 잡음을 보다 정확한 추정을 제공함으로써, 지각 필터의 응답을 개선할 수 있고 더불어 잡음에 의해 열화 된 신호의 음질을 개선할 수 있다. 또한 저 대역에 영향을 미치는 잡음인 경우 다른 방법들과는 달리 음질의 개선이 뚜렷하다. 기존의 방식과 비교를 위해 다양한 신호 대 잡음 비(signal-to-noise ratio, SNR)에서 열화 된 오디오 신호를 입력으로 사용하였다. 입력 SNR이 5dB, 10dB, 15dB와 20dB의 각각의 경우에 대하여 SSNR(Segmental SNR)과 잡음 대 마스킹 비(Noise-to-mask ratio, NMR), 음질 테스트를 수행한 결과, 청감 테스트(Mean Opinion Score, MOS Test) 결과의 향상과 음질개선의 개선을 확인할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.7
• /
• pp.333-338
• /
• 2006

This paper proposes an improved do-noising method using multi-thresholding function based on translation-invariant (W) wavelet proposed by Donoho et al. for underwater radiated noise measurement. The traditional wavelet thresholding de-noising method causes Pseudo-Gibbs phenomena near singularities due to discrete wavelet transform. In order to suppress Pseudo-Gibbs Phenomena, a do-noising method combining multi-thresholding function with the translation-invariant wavelet transform is proposed in this paper. The multi-thresholding function is a modified soft-thresholding to each node according to the discriminated threshold so as to reject かon external noise and white gaussian noise. It is verified by numerical simulation. And the experimental results are confirmed through sea-trial using multi-single sensors.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.250-256
• /
• 2002

Resistivity tomography has become an important tool to image underground resistivity distribution. This method has been widely applied to site investigation for engineering and environmental purpose. In resistivity tomography, various electrode arrays can be used and each array has both merits and demerits. For example, the pole-pole array has high signal to noise ratio (S/N ratio), but its resolution is too low. The dipole-dipole array has low S/N ratio, but its resolution is very high. The Pole-dipole may has intermediate Snf ratio and resolution. The modified Pole-dipole array, recently proposed, shows reasonable S/N ratio and resolution, which are comparable to the pole-dipole array. These electrode arrays except the pole-pole array, however, have the problem that the apparent resistivity can diverge at some special electrode Positions. Also, the Pole-Pole array may not reflect the doe resistivity of an anomalous body. In this study, we propose a new electrode array, mixed array, where pole-dipole and modified pole-dipole ways are selectively used with the relative positions of current and potential electrodes. The mixed array has the same level of S/N ratio and resolution as the pole-dipole array and the apparent resistivity does not diverge in the receiver hole. Furthermore, the apparent resistivity using the array can reflect the true resistivity of the anomalous body.

• Journal of the Korea society of information convergence
• /
• v.6 no.2
• /
• pp.45-49
• /
• 2013

Electrocardiogram(ECG) signal noise as well as conducting other bio-signal measurement were generated. It was intened to enhance the accuracy of cadiac disease diagnosis with removing signal white-noise. Sampling signal was made with generating white-noise. The noise were removed using wavelet transforms and thresholding. Removed noise were compared numerical using SNR(signal to noise ratio). The results compared SNR showed that SURE method was 5.931, 4.9301 in 3, 5dB noise, uninversal was 3.6590, 1.9698 in 7, 9dB noise. De-noising by Thresholding removed noise effectively. ECG signal is expected to improve the accuracy of cadiac desease dianosis.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.60.3-60.3
• /
• 2021

Squeezed vacuum injection을 이용한 중력파 검출기의 관측감도 향상 기술은 중력파 검출기 광신호의 양자 잡음을 제어하여 관측감도를 높이는 기술로 이론적으로는 10dB에 가까운 신호 대 잡음비 향상을 달성할 수 있다. 실험실 환경에서는 이미 10dB 이상의 신호 대 잡음비 향상을 달성했으며 실제 중력파 검출기에서는 GEO600의 6dB의 신호 대 잡음비 향상이 현재까지 가장 높은 수준이다. 한국천문연구원에서는 2019년부터 차세대 중력파 검출기 기술개발로 1064 nm 파장의 squeezer 개발을 추진했으며 현재 parametric down conversion을 이용해 squeezed vacuum을 생성하는 공진기를 제작하여 시험하는 단계에 있다. 이 발표에서는 한국천문연구원의 1064 nm squeezer 개발 연구와 개발 현황에 대해 소개하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.45-55
• /
• 1999

In this paper, we used the WLMS(Wavelet domain Least Mean Square) adaptive filter based on the wavelet transform to cancel grain noise. Usually, grain noise occurs in changes of the crystalline structure of metals in high temperature environment. It makes the detection of flaw difficult. The WLMS adaptive filtering algorithm establishes the faster convergence rate by orthogonalizaing the input vector of adaptive filter as compared with that of LMS adaptive filtering algorithm in time domain. We implemented the WLMS adaptive filter by using the delayed version of the primary input vector as the reference input vector and then implemented the CA-CFAR(Cell Averaging- Constant False Alarm Rate) threshold estimator. CA-CFAR threshold estimator enables to detect the flaw and back echo signals automatically. Here, we used the output signals of adaptive filter as its input signal. To Cow the statistical characteristic of ultrasonic signals corrupted by grain noise, we performed run test. The results showed that ultrasonic signals are nonstationary signal, that is, signals whose statistical properties vary with time. The performance of each filter is appreciated by the signal-to-noise ratio. After LMS adaptive filtering in time domain, SNR improves to about 2-3㏈ but after WLMS adaptive filtering in wavelet domain, SNR improves to about 4-6㏈.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.651-660
• /
• 2019

The present study aims to find out the necessary speech sound level which can satisfy with the speech intelligibility in a noisy classroom environments. For this, auralized materials were made to undertake listening tests with 27 people. Speech intelligibility tests were carried out using both Consonant-Vowel-Consonant (CVC) and Phonetically Balanced Words (PBW) methods. Signal to noise ratio was changed by 5 dB for each test. As a result, it was found that speech intelligibilities are increasing with larger Signal to Noise Ratio (SNR). It was also found that there is a lot of difference of speech intelligibilities by SNR for syllables (CVC) with the Reverberation Time (RT) of 1.5 s. However, any significant difference was not found for words (PBW) in the case with RTs of below 0.8 s. Also, it was revealed through the 2-way analysis of variance (ANOVA) test that SNR is the only attentive factor which can affect the Korean speech intelligibilities for both PBW and CVC methods. Therefore, RTs below 0.8 s could be the acoustic criteria for classroom which can minimize the effects of noise. In the case with RTs larger than 0.8 s, much larger SNR is needed to give sufficient speech intelligibility.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.41-45
• /
• 1985

A degradation of the signal-to-noise ratio (SNR) in a digital moving target indicator system (DMTI System) can be Improved by weighting of the DMTI output pulses before the integration process. and it Is shown that the signal-to-noise ratio Is unproved as the nunlber of delay line cancellers. It is Known that signal-to-noise ratio obtained with optimum weighting is greater than that obtained with binomial weighting. An improvement performance of the signal-to-noise ratio for each case is presented through the results or a computter simulation.