• Title/Summary/Keyword: 신호관리방법

Search Result 381, Processing Time 0.024 seconds

English Digital Signal Processing Circuit in HD Monitor using Synchronization Signal Optimization (동기신호 최적화 기법을 통한 고품위급 모니터의 디지털 신호처리회로 구현)

  • 천성렬;김익환;이호근;하영호
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.11C
    • /
    • pp.1152-1160
    • /
    • 2003
  • Start The current paper proposes an improved HD(High Definition) monitor that can support a signal input with various resolutions. Due to the inadequate performance of the built-in digital PLL(Phase-locked Loop) of an ADC(Analog to Digital Converter) and poor tolerance of ADC ICs, there are problems in the stable processing of synchronization signals with various input signals. Accordingly, the proposed synchronization signal optimization technique regenerates the horizontal synchronization signal in the vertical blanking interval based on the regularity of the synchronization signal, i.e. the timing of the falling edge signal remains constant, thereby solving the above problem and minimizing the interference of the system. As a result, the proposed system can stabilize various synchronization signals with different resolution modes.

On the Design of ToA Based RSS Compensation Scheme for Distance Measurement in WSNs (ToA 기반 RSS 보정 센서노드 거리 측정 방법)

  • Han, Hyeun-Jin;Kwon, Tae-Wook
    • The KIPS Transactions:PartC
    • /
    • v.16C no.5
    • /
    • pp.615-620
    • /
    • 2009
  • Nowadays, wireless infrastructures such as sensor networks are widely used in many different areas. In case of sensor networks, the wirelessly connected sensors can execute different kind of tasks in a diversity of environments, and one of the most important parameter for a successful execution of such tasks is the location information of each node. As to localization problems in WSNs, there are ToA (Timer of Arrival), RSS (Received Signal Strength), AoA (Angle of Arrival), etc. In this paper, we propose a modification of existing ToA and RSS based methods, adding a weighted average scheme to measure more precisely the distance between nodes. The comparison experiments with the traditional ToA method show that the average error value of proposed method is reduced by 0.1 cm in indoor environment ($5m{\times}7m$) and 0.6cm in outdoor environment ($10{\times}10m$).

스마트 진공펌프용 상태변수 측정모듈의 주요 성능과 확장성

  • Jeong, Wan-Seop;Baek, Gyeong-Min
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2016.02a
    • /
    • pp.110.1-110.1
    • /
    • 2016
  • 국내외 최첨단 반도체 및 평판 디스플레이 공정에서 필요한 개별 건식 진공펌프들의 자기진단을 통한 예지보수의 실시간 구현 장치 개발과제의 2차년 전반기 수행된 연구결과의 일부를 본 논문에서 소개한다. 본 연구에서 최종 목표로 설정하고 있는 "smart" 진공펌프란 운전상태에 관련된 변수들의 측정치를 기반으로 한 자기진단 (self-diagnostics) 기능을 내장한 차세대 공정용 진공펌프를 의미한다. 1차년에 선정된 상태진단용 진공펌프의 상태변수(state variable)들의 효과적인 수집을 구현하기 위한 연구가 진행되었다. 기존의 반도체 공정용 진공펌프들에서 측정하고 있는 상태변수로는 온도, 유량, 배기관 압력, 모터 소비전류 등과 같은 정적인 변수들뿐 아니라, 회전기계류의 상태진단에 필수적인 진동신호를 추가한 상태 변수 수집 장치를 개발하였다. 본 연구팀은 진공펌프의 회전진동을 유발하는 대표적인 부품은 회전체, 베어링, 그리고 치차로 이들 3 종의 회전진동성분들을 효과적으로 측정할 수 있는 신호처리 기법을 개발하였다. 금번 연구에서 채택한 진동신호 처리기법은 초고속 FFT 변환 기반의 주파수 대역 별 진동 레벨 환산과 더불어 다단계로 구성된 디지털 필터 (multi-staged decimation filter) 기법을 개발 적용하였다. 이러한 신호처리 기법을 통하여 측정된 진동 신호로부터 회전체, 베어링, 그리고 치차의 회전 진동성분을 효과적으로 측정하는 방법을 금번 학술대회에서 소개한다. 그리고, 진공펌프 상태진단에 필요한 상태변수의 실시간 backup 방법, 그리고 공정관리 server와 통신기능, 그리고 펌프 현장 관리자용 PC와 통신 기법 등 상태변수 측정 모듈의 확장성에 대한 기술적 내용을 소개한다.

  • PDF

Analyzing Library Space Use Patterns in a Public Library Through Smartphone WiFi (스마트폰 무선신호를 이용한 공공도서관 이용자의 공간이용행태 분석)

  • Park, Sungjae
    • Journal of the Korean Society for information Management
    • /
    • v.36 no.1
    • /
    • pp.295-313
    • /
    • 2019
  • The purpose of this study is to analyze library space use patterns through users' smartphone WiFi. This study is applied a method to detect WiFi signal of users' smartphone to analyze the in-library wayfinding of users. The library usage data were collected for four months in a library in Seoul, Korea. The results show that the average 37.9% of library users revisits the library the next month. Half of users stay under 7 minutes in the library. Users mainly visit the library between 2 and 3 o'clock, and few users visit the library after 5 pm on weekends. The floor moving pattern result shows that the co-visit rate between the third and fourth floor is higher than others, in that these two floors are mainly composed of book shelves. These results indicate that the method to detect the WiFi signal for spatial pattern analysis could be more effective than observation which was used in previous research. It, therefore, is expected that this method would be applied in other libraries to analyze and enhance the library space usage.

교통지리정보의 교통안전시설물 관리시스템 설계 및 구현

  • 하덕천;류근호
    • Proceedings of the Korea Society of Information Technology Applications Conference
    • /
    • 2001.05a
    • /
    • pp.117-118
    • /
    • 2001
  • 교통지리정보시스템(TGIS:Traffic Geographic Information System)은 지리정보시스템의 서브시스템으로서 도로교통법 상에 규정된 신호기, 노면표시, 도로표지와 중앙분리대, 방호책, 도로 반사경, 기타 시설물과 같이 지상에 설치된 교통안전시설물을 관리한다. 이 연구에서는 교통지리정보를 위하여 교통안전시설물 관리시스템을 설계하고 구현하였다. 아울러 시스템의 구현 방법을 제시하고 구현된 결과르 실제 현상에 적용시켰다.

  • PDF

Determination Method of Signal Timing Plan Using Travel Time Data (통행시간 자료를 이용한 신호시간계획의 결정 방법)

  • Jeong, Young-Je
    • The Journal of the Korea Contents Association
    • /
    • v.18 no.3
    • /
    • pp.52-61
    • /
    • 2018
  • This research suggested the traffic signal timing calculation model for signal intersections based on sectional travel time. A detection system that collects sectional travel time data such as Urban Transport Information System(UTIS) is applied. This research developed the model to calculate saturation flow rate and demand volume from travel time information using a deterministic delay model. Moreover, this model could determine the traffic signal timings to minimize a delay based on Webster model using traffic demand volume. In micro simulation analysis using VISSIM and its API ComInterface, it checked the saturation conditions and determined the traffic signal timings to minimize the intersection delay. Recently, sectional vehicle detection systems are being installed in various projects, such as Urban Transportation Information System(UTIS) and Advanced Transportation Management System(ATMS) in Korea. This research has important contribution to apply the traffic information system to traffic signal operation sector.

A Study on Active Audioprint Application Service (Active Audioprint 응용 서비스 연구)

  • Lee, SangWoon;Jeong, Youngho
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2016.11a
    • /
    • pp.36-38
    • /
    • 2016
  • 본 논문에서는 방송 오디오 신호에 데이터를 부가하여 전송할 수 있는 방법으로 연구가 수행되고 있는 Active Audioprint 방식을 소개하고, 이의 적용이 가능한 응용 서비스들을 제시한다. Active Audioprint 는 별도의 데이터 전송채널을 통하지 않고 오디오 신호 자체에 삽입하여 전송하는 기술이며, Active Audioprint 기술, 응용 가능한 서비스 및 기술적 고려사항들을 제시하였다. Active Audioprint 는 향후 통합시청률 조사 및 방송 콘텐츠의 저작권 관리 등 다양한 분야에 활용이 가능할 것이다.

  • PDF

An Implementation of Network Based Real Time Virtual Measurement Control System Using Graphic Programming Language (그래픽 프로그래밍 언어를 이용한 네트웍 기반 실시간 가상계측제어 시스템의 구현)

  • 윤근수;정원용
    • Proceedings of the Korea Institute of Convergence Signal Processing
    • /
    • 2000.08a
    • /
    • pp.41-44
    • /
    • 2000
  • 최근 계측제어 시스템은 동시측정, 전사적 데이터베이스 연결, 테스트 관리와 측정장비 자원의 공유 등 점점 복잡해지고 구축 시간과 비용이 증가하는 문제점을 가지고 있다 본 논문에서는 이러한 문제점을 해결하기 위하여 그래픽 프로그래밍 언어인 HP VEE를 이용하여 네트웍 기반 실시간 가상계측제어 시스템의 구현 방법을 제안하고, 초전기(Pyroelectricity)현상을 측정하는 시스템에 적용하여 기존의 시스템 구현에 비하여 효과적인 결과를 얻었다.

  • PDF

On Efficient Adaptive Equalization of Block Data Transmission Signals (블록 데이터전송 신호에 대한 효율적인 채널등화 기법 연구)

  • 이상경;이재천
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.1C
    • /
    • pp.37-46
    • /
    • 2003
  • As Information Security Technology has become rather transparent, wide, and integrated than in part, exclusive, and separated, A necessity of the study about integrating the separated distributed security systems into one module, has grown However, there is no integrated framework which can manage all separate security systems as one integrated one yet. Accordingly, we propose a new policy based network admirustrative model in this paper which can integrate individual security systems and distributed control way into one effectively.