• KOREAN POULTRY JOURNAL
• /
• v.33 no.12 s.386
• /
• pp.93-95
• /
• 2001

충남 연기군에서 채란업에 종사하는 L사장은 최근 농장부지에 연접하여 계란 선별장 및 보관창고 200평을 신축을 허가 받기 위하여 군청에 들렀다가 환경보호과 직원으로부터 사전환경성검토를 받아야 신축허가가 가능하다는 말을 듣고 사전환경성검토를 받기 위한 준비중이다. 그러나 사전환경성검토 같은 환경정책은 양계인에게는 생소한 분야이고 보니 L 사장도 이에 대한 전문지식이 없어 어려움을 겪고 있다. 앞으로도 다른 양계 농가에서도 이와 같은 사례가 많을 것으로 판단되어 사전환경성 검토에 대하여 알아본다.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.116-124
• /
• 2014

In the plants operated under high temperature condition, piping system load analysis is often performed to prevent accidents caused by thermal deformation and also to locate inspection prioritity points of the piping system. In this study, piping system stress analysis was performed for a pipe system between the reactors in a process plant. The piping system includes typically installed hangers and expansion joints. In order to evaluate the effects of structural components such as hangers and expansion joints, the case for the expansion joint or the hanger under abnormal operation is considered. By comparison anlaysis results of piping system during normal operation and abnormal operation, the role of each pipe components are studied.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.149-156
• /
• 2019

A stretchable thermoelectric module consisting of 5 pairs of Bi₂Te₃-based hot-pressed p-n thermoelectric legs was processed by filling the module inside with polydimethylsiloxane (PDMS) and removing the top and bottom substrates. Its stretchable characteristics and power generation properties were measured. The integrity of the module was kept well even after 10 strain cycles ranging from 0 to 0.1. With increasing the tensile strain to 0.2, the module circuitry became open because of joint failure between Cu electrodes and thermoelectric legs. The stretchable thermoelectric module exhibited an open circuit voltage of 4.6 mV with a temperature difference of 2.2K across both ends of thermoelectric legs, and changes in its open circuit voltage were below 5% for tensile strains of 0~0.1. Being elongated for a strain of 0.1, it exhibited the maximum output power of 18.5 ㎼ with the temperature difference of 2.2K across its both ends.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.645-648
• /
• 2008

The expansion joint is an important part of the bridge, but the failure is occurred on the non-shrinkage concrete which is connected to the slab of the bridge and the expansion joint, and the other problem is the release of anchors in expansion joint due to the impact and vibration during the driven car on the bridge, especially an overloaded car. In this study, to overcome the failure of non-shrinkage of concrete, high impact resisting mortar is developed. The high impact resisting mortar shall be a polyurethane material compounded with an aggregate system to develop excellent flexibility characteristics, high load bearing capacity.

• The monthly packaging world
• /
• s.42
• /
• pp.162-165
• /
• 1996

• Korean Architects
• /
• no.4 s.181
• /
• pp.59-61
• /
• 1984

• Korean Architects
• /
• no.10 s.163
• /
• pp.48-51
• /
• 1982

• Korean Architects
• /
• no.12 s.201
• /
• pp.82-84
• /
• 1985

• Korean Architects
• /
• v.4 no.12 s.12
• /
• pp.8-12
• /
• 1969

• The monthly packaging world
• /
• s.344
• /
• pp.70-72
• /
• 2021