• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.181-189
• /
• 2001

This paper describes the positioning accuracy of GPS moduls (KGP9800C, KiRyung) which need to record the operating position of fishing boat as realtime processing in order to develope auto recording system of fishing boat's operating information, and then it's positioning accuracy for DGPS receiver (MGP-100D, Shin-A) and DGPS beacon (GP-36, Furuno) were analyzed. Futhermore, it was examined the positioning error of the GPS module with processing algorithm to minimize the effect of the signal fluctuations. The results indicate that the positioning error is able to decrease 5m as 2drms, and such improvement of positioning performance for GPS module (KGP9800C) can be provide the basic design data in the development of the auto recording system of fishing boat's operating information.

• Journal of Distribution Research
• /
• v.12 no.4
• /
• pp.27-47
• /
• 2007

Using survey data and the Heckit model that adequately controls the sample selection bias, we analyze shoppers expenditure through two major emerging shopping channels: Internet shopping and TV home shopping channels. Age, Internet experience, daily Internet usage, the number of computers are factors that affect the ratio of consumers' expenditure through Internet shopping relative to the expenditure through TV home shopping. Shopping frequency which represents the shoppers' incentives to reduce transaction costs also has a positive effect on the proportion of shoppers' expenditure through the Internet shopping. Shoppers' perceptions of convenience, reliability, speed, and diversity are also shown to affect shoppers' relative expenditure ratio through Internet shopping. In contrast, shoppers' perception of prices does not seem to affect their purchasing behavior.

• Journal of the Korean Society for information Management
• /
• v.25 no.2
• /
• pp.143-155
• /
• 2008

Authoritative as well as objective information on ranking or dominant research areas of academic departments/schools in a certain discipline is essential for the graduate school applicants. In this study, we performed an informetric analysis to identify dominant research areas in the top 10 U.S. LIS schools. We used two different datasets of research productivity and research interests of the LIS faculty. The correspondence analysis method was employed to graphically display the association between research areas and the LIS schools. We found that the research Productivity data collected from SSCI database generated a very informative map presenting which research areas were dominant in which LIS schools. We also found that for the two most productive suhject areas in LIS over the past 10-year period, the proportion of research articles in information retrieval decreased to a great extent in the recent 5-rear period, whereas that of information seeking behavior showed an almost same degree of increase.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.7-14
• /
• 2006

Most researches about rumble strips have Presented only the before-and-after analysis of the accidents. So, Researchers have not dealt with the estimation of rumble strip's effectiveness on the driver's alertness. In this study. the effectiveness of the rumble strips on the driver's alertness was estimated by measuring the bio-signal transmitted from the driver. The bio-signal acquired for this experiments were theta wave in central lobe. The experimental results revealed that the theta waves as measured form the drivers's head while in the rumble strip section differed from those while in non-rumbled section; 74 percent decrease in theta wave value, respectively. This fact finding could mean that the driver's alertness increased from 74 percent while in the rumble strip section of the road. In all five trials of driving experiments on the rumble strip section, all the drivers showed the best alertness as measured by the theta waves in the first driving trial.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.168-176
• /
• 2014

Detecting moving objects from a video sequence is a fundamental and critical task in video surveillance, traffic monitoring and analysis, and human detection and tracking. It is very difficult to detect moving objects in a video sequence degraded by the environmental factor such as fog. In particular, the color of an object become similar to the neighbor and it reduces the saturation, thus making it very difficult to distinguish the object from the background. For such a reason, it is shown that the performance and reliability of object detection and tracking are poor in the foggy weather. In this paper, we propose a novel method to improve the performance of object detection, combining a haze removal algorithm and a local histogram-based object tracking method. For the quantitative evaluation of the proposed system, information retrieval measurements, recall and precision, are used to quantify how well the performance is improved before and after the haze removal. As a result, the visibility of the image is enhanced and the performance of objects detection is improved.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1010-1019
• /
• 2005

In this paper, we used neural network technique to model memory effects of RF power amplifier which is fed by two-tone input signals. The memory effects in power amplifier were identified by observing the unsymmetrical distribution of IMD(Inter-Modulation Distortion) measurements with the change of tone spacings and power levels. Different asymmetries of IMD were also found at different center frequencies. We applied TDNN technique to model LDMOS power amplifier based on two tone IMD data, and the accuracy was very high compared to other modeling methods such as the(memoryless) adaptive modeling method.

• Fire Science and Engineering
• /
• v.16 no.3
• /
• pp.8-11
• /
• 2002

Recently, the spark and the overheat due to in the failure of pressure contacts on connecting points and the momentary short circuit have been the major causes of electrical fire because these may cause the deposition and the graphite of insulating materials in electrical wiring system. Also, because in these cases the current is a surge one, the losses and faults of a communication, a home appliances, a computer and a measuring instrument may occur. Especially, in such cases, we are very difficult to detect the failure of pressure contacts on connecting points and the momentary short circuit. In this paper, we have developed an auxiliary control device, the electrical fire prevention control device(EFPCD), of an earth leakage breaker(ELB). And we can pre-vent the electrical fire caused by the spark and the overheat occurring in the failure of pressure contacts in connecting points and the momentary short circuit with the EFPCD.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.529-534
• /
• 2014

Pyrotechnic devices are widely used for space appendages. However, a cube satellite requirements do not permit the use of explosive pyrotechnic device. A nichrome burn wire release has typically been used for holding and release of deployable appendages of the cube satellite due to its simplicity and low cost. However, relatively low mechanical constraint force and system complexity for application of multi-deployable systems are disadvantages of the conventional mechanism. To overcome these drawbacks, we developed a hinge driving segmented nut type holding and release mechanism based on the nichrome burn wire release. The functional performance of the mechanism has been verified through release function test, static load test and shock level measurement test.

• Composites Research
• /
• v.31 no.1
• /
• pp.12-16
• /
• 2018

Composite material and mold steel can be expanded differently with the temperature gradients during the forming process because their coefficients of thermal expansions are not the same. Therefore, in order to manufacture the product with accuracy, it is necessary to verify that the forming pressure on the surface of the composite material is maintained to the required level from the material supplier. In this paper, the pressure between the composite material and mold due to the temperature difference was predicted by finite element analysis and the accuracy of predicted value was verified by measuring the thermal expansions of mold steel by the ruler. The predicted value by finite element analysis is closely in agreement with one by the experiment within the required tolerance value of ${\pm}0.05mm$.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.4
• /
• pp.15-23
• /
• 2015

PURPOSE: We aims to promote the development of proprioception measurement using smartphones, goniometers, and laser pointers as compared to the conventional use of electrogoniometer measurement. METHODS: Measurements using an electrogoniometer were previously proved to be reliabile and valid. Among E-university students, 20 who had no fracture, operation history, or inflammatory arthritis were examined. These subjects had not performed regular exercise in the past 3 months. Proprioception measurements were performed using four different measurement tools, three times per day, for test-retest analysis. RESULTS: No notable test-retest differences were noted for any of the measurement methods (P>0.05). With regard to the test-retest reliability for each measurement method, we observed that the readings from both the electrogoniometer and smartphone have high reliability (ICC>0.80), whereas the readings from the laser pointer have moderate reliability (ICC>0.60). When assessing the concurrent validity between electrogoniometers with individual measurements, we did not observe any notable difference between the smartphone and electrogoniometer (P>0.05) and these tools in fact showed high correlation (r>0.60, P<0.05) and a moderate reliability (ICC>0.60). Moreover, there was no notable difference in between electrogoniometers and laser pointers (P<0.05). CONCLUSION: CONCLUSION: The findings of this suggested that proprioception can be measured by using smart-phones, and proved that this method has sufficient credibility. Moreover, we noted that the concurrent validity with smartphones was high in comparison with the conventional electrogoniometer, which also indicates the validity and credibility. Based on these findings, we conclude that the measurement of proprioception by using a smartphone can be widely adopted.