• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.21-26
• /
• 2011

The purpose of this paper is to present the damage patterns of cellular phone (SCH_W830) batteries according to energy sources and have them utilized as data for the settlement of disputes between manufactures and consumers. The reliability was secured by maintaining the ambient temperature and humidity at $22{\pm}2^{\circ}C$ and 40~60 %, respectively. The voltage of the battery used for the tests was measured to be 4.18V between positive pole (+) and negative pole (-)(1), and 4.19 V between positive pole (+) and negative pole (-)(2). This study applied the Korean Industrial Standard (KS) to the flammability test of cellular phones due to a general flame applied to them and found that no damage occurred to the built-in battery even though the flame was applied to the cases of cellular phones for 30 seconds. From the results of immersing the cellular phones in the saline solution (NaCl, 0.9 %) for 180 seconds, it was found that there was a trace of carbonization and melting due to the heat caused by leaking current. It can be seen that when the cellular phones were heated for 70 seconds using a microwave oven (MWO), the areas containing the metal holder, recharging connector, antenna, etc., were melted and discolored and that other areas showed no particular problems. That is, while the external carbonization of cellular phones, built-in metals and dielectric materials, and damage and deformation of the battery terminal block, etc., occurred differently depending on the types of energy sources, the voltage showed comparatively constant characteristics. Therefore, it is thought to be possible to attribute the cause of damage to the battery by performing analysis taking into consideration comprehensively the characteristics of the flame spread pattern as well as the melting and deformation of metals.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.1
• /
• pp.55-63
• /
• 2016

Temperature lapse rate within the planetary boundary layer shows a diurnal cycle with a substantial variation. The widely-used lapse rate value for the standard atmosphere may result in unaffordable errors if used in interpolating hourly temperature in complex terrain. We propose a simple method for estimating hourly lapse rate and evaluate whether this scheme is better than the conventional method using the standard lapse rate. A standard curve for lapse rate based on the diurnal course of temperature was drawn using upper air temperature for 1000hPa and 925hPa standard pressure levels. It was modulated by the hourly sky condition (amount of clouds). In order to test the reliability of this method, hourly lapse rates for the 500-600m layer over Daegwallyeong site were estimated by this method and compared with the measured values by an ultrasonic temperature profiler. Results showed the mean error $-0.0001^{\circ}C/m$ and the root mean square error $0.0024^{\circ}C/m$ for this vertical profile experiment. An additional experiment was carried out to test if this method is applicable for the mountain slope lapse rate. Hourly lapse rates for the 313-401m slope range in a complex watershed ('Hadong Watermark 2') were estimated by this method and compared with the observations. We found this method useful in describing diurnal cycle and variation of the mountain slope lapse rate over a complex terrain despite larger error compared with the vertical profile experiment.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.389-400
• /
• 2011

A high-performance liquid chromatographic (HPLC) method was developed to determine residues of phenothrin and silafluofen, known as synthetic pyrethroids, in agricultural commodities. Insecticide residues were extracted with acetone from representative samples of four crops which comprised rice, apple, pepper and cabbage. The extract was purified serially by liquid-liquid partition and Florisil column chromatography. For rice and pepper samples, acetonitrile/n-hexane partition was additionally adopted to remove nonpolar interferences. Reversed phase HPLC using an octadecylsilyl column was successfully applied to separate two phenothrin isomers and silafluofen from sample co-extractives. Intact parent compounds were sensitively detected by ultraviolet absorption at 226 nm. Recovery experiment at the quantitation limit validated that the proposed method could apparently determine phenothrin and silafluofen residues at 0.02 and 0.01 mg/kg, respectively. Mean recoveries of phenothrin and silafluofen from four crop samples fortified at three levels in triplicate were in the range of 82.4~109.8% and 83.7~109.8%, respectively. Relative standard deviations of the analytical method were all less than 10%, irrespective of crop types and spiking levels. A selected-ion monitoring (SIM) LC/mass spectrometry (MS) with electrospray ionization was provided to confirm the suspected residue of phenothrin, even though no sufficient ionization of silafluofen was obtained. Both phenothrin and silafluofen could be successfully confirmed by gas chromatography/MS SIM with electron impact at 70 eV. The proposed method is sensitive, repeatable and rapid enough to apply to officially routine inspection of agricultural products.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.2
• /
• pp.97-111
• /
• 2013

It is very important to understand the condition of the surround rock for the successful construction of underground space. Representative methods of estimating the rock mass condition are RMR method and Q-system, and they are applied on design, construction, and maintenance. However, many problems with the accuracy of the measurement method and the subjective viewpoint are questioned continuously, so many researchers have been studied for estimating rock condition from various methods. Most of them show only the local relation and a tendency between site investigation data and rock conditions. In this paper, the relationship between RMR method and electrical resistivity is deducted using the analytical equation derived theoretically from electric field analysis on jointed rock mass. And also, probabilistic relationship between RMR method and electrical resistivity is deducted for the increase of accuracy. If a suggested method is applied with the conventional method for estimating the rock condition, it will be helpful to estimate RMR values on the field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.721-728
• /
• 2017

High-grade gray cast iron (HCI350) was prepared by adding Cr, Mo and Cu to the gray cast iron (GC300). Their microstructure, mechanical properties and fatigue strength were studied. Cast iron was made from round bar and plate-type castings, and was cut and polished to measure the percentage of each microstructure. The size of flake graphite decreased due to additives, while the structure of high density pearlite increased in volume percentage improving the tensile strength and fatigue strength. Based on the fatigue life data obtained from the fatigue test results, the probability - stress - life (P-S-N) curve was calculated using the 2-parameter Weibull distribution to which the maximum likelihood method was applied. The P-S-N curve showed that the fatigue strength of HCI350 was significantly improved and the dispersion of life data was lower than that of GC300. However, the fatigue life according to fatigue stress alleviation increased further. Data for reliability life design was presented by quantitatively showing the allowable stress value for the required life cycle number using the calculated P-S-N curve.

• Journal of health informatics and statistics
• /
• v.43 no.4
• /
• pp.290-299
• /
• 2018

Objectives: This study aimed to evaluate the change in weight and heart rate associated with the use of phentermine through meta-analysis based on the published literatures. Methods: Eight electronic databases, PubMed, EMBASE, Cochrane library, and five domestic databases were used to search the literature. Randomized controlled trials that evaluated the change in weight and heart rate with the use of phentermine compared with placebo were included in this study. The fixed-effect model weighted by the Mantel-Haenszel method was used in the meta-analysis, and the random-effects model was used when heterogeneity was present. Results: We included 12 studies comprising 677 patients. The change in weight observed with the use of phentermine (SMD = -1.37, 95% CI: -1.55, -1.19) was statistically significant compared with that observed with placebo. As per the subgroup analysis results, the change in weight by publication year, country, phentermine dosage, follow-up check was not heterogeneous. The change in heart rate observed with the use of phentermine (SMD = 0.64, 95% CI: 0.35, 0.92) was significant compared with that observed with placebo. Conclusions: Weight loss and increased heart rate were confirmed in phentermine compared with placebo.

• Korean Journal of Food Science and Technology
• /
• v.51 no.5
• /
• pp.425-431
• /
• 2019

Selected leafy vegetables, widely used for Korean Namul dishes, were heat-treated in different ways and their folate retention was investigated. The Lactobacillus casei method was applied for folate estimation and validated to ensure reliability of analytical data. The folate content in Namul highly varied, from 29.7 to $293.4{\mu}g/100g$, depending on the heating methods and the types of vegetables. Most of the Namul variants showed increased folate content on heat treatment. Frying yielded higher folate retention than the other cooking methods (blanching, steaming, baking, and panfrying), and pig weed showed the highest folate retention (3.3 times, $293.4{\mu}g/100g$). L. casei assay for folate estimation showed 95.7% recovery and relative standard deviations less than 2% for both reproducibility and repeatability, indicating good accuracy and precision. Quality of the folate assay was assured by monitoring a quality control chart and a proficiency test (z-score= -0.1) during the entire of study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.82-92
• /
• 2019

The purpose of this study was to analyze the relationship and degree of agreement between the six types of Geometry Psychological Assessment (GEOPIA) and four functions of the Myers-Briggs Type Indicator (MBTI) personality test, and to investigate the appropriate level of vocational aptitude commonly recommended by each tool. A total of 377 adult men and women from Korea, aged between 19 and 70 years, were tested using GEOPIA and the MBTI. Cronbach's alpha was calculated to verify the validity and reliability of the measuring tools, and the mean and standard deviation of each variable were calculated. Also, a cross-sectional analysis was conducted to examine the relationship between GEOPIA and the MBTI. The results showed that Round/Triangle (RT) types, Round/Box (RB) types, Triangle/Box (TB) types and Box/Curve (BC) types among the GEOPIA personality types are highly related to MBTI's Sensing/Thinking (ST) types. GEOPIA RC types were related to Intuition/Feeling (NF) and Sensing/Feeling (SF) types, and TC types were highly related to Intuition/Thinking (NT) types. Based on the common characteristics of the two tests, the findings suggest appropriate levels of vocational aptitude. Through this research, it was confirmed that GEOPIA (a Korean psychology and personality test) can be used in counseling, coaching, and education, and above all, is a reliable tool for vocational psychological assessment to search for career aptitude.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.5
• /
• pp.1123-1132
• /
• 2012

Many domestic organizations are introducing and operating various information security management systems capable of coping with technical, administrative, and legal issues comprehensively and systematically, in order to prevent various infringement incidents such as personal information disclosure and hacking preemptively and actively. However, empirical analyses regarding the extent to which an information security management system contributes to information security performance have not been fully conducted, even though enterprises and organizations are actively introducing such systems in order to achieve their information security objectives as a part of their organizational management activities in line with their respective business, by investing considerable effort and resources in developing and operating these systems. This approach can be used to apply, develop, and operate the information management system actively within an organization. this study focused on analyzing how each specific phase of the information security management system affects information security performance, compared with previous studies, which generally focus on the information security control item in analyzing information security performance. The information security management system was analyzed empirically to determine how the Security PCDA cycling model affects information security performance.

• Journal of the Korea Society for Simulation
• /
• v.30 no.4
• /
• pp.9-19
• /
• 2021

Electronic voting has been recognized as an alternative to complement the limitations of existing paper voting. At the same time, security concerns are being raised. This paper presents a blockchain-based electronic voting and survey system that can guarantee reliability. Our smart contract was created using Solidity on Ethereum which is a blockchain-based distributed computing platform, and the system was implemented in connection with the Javascript based user interface. In addition, in order to protect the personal information of participants, the system is generating hash of the personal data and storing the hash of users for the contract data. Since we exploited different kinds of languages for the system, we derived items of functionality testing and presented the functionality testing result. Moreover, we made use of the Chrome's performance evaluation functionality to see the response time of the blockchain-based system. In addition, we compared the performance with the system which has the same functionality on database. The contribution of this research is design and implementation of blockchain-based electronic voting system and presentation of the functionality and performance simulation result.