• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.237-247
• /
• 1993

Activity ratio of two radioactive primary fission products which had sufficiently different half-lives was expressed as functions of cooling time and irradiation histories in which average burnup, irradiation time, cycle interval time and the dominant fissile material of the spent fuel were included. The gamma-ray spectra of 36 samples from 6 spent PWR fuel assemblies irradiated in Kori unit-1 reactor were obtained by a spectrometric system equipped with a high purity germanium gamma-ray detector. Activity ratio $^{l44}$Ce $^{l37}$Cs, analyzed from each spectrum, was used for the calculation of cooling time. The results show that the radioactive fission products $^{l44}$Ce and $^{l37}$Cs are considered as useful monitors for cooling time determination because the estimated cooling time by detection of activity ratio $^{l44}$Ce $^{l37}$Cs agreed well with the operator declared cooling time within relative difference of $\pm$5 % despite the low counting rate of the gamma-ray of $^{l44}$Ce (about 10$^{-3}$ count per second). For the samples with several different irradiation histories, the determined cooling time by modeled irradiation history showed good agreement with that by known irradiation history within time difference of $\pm$0.5 year. From this result, it would be expected to be possible to estimate reliably the cooling time of spent nuclear fuel without the exact information about irradiation history. The feasibility study on identification of and/or sorting out spent nuclear fuel by applying the technique for cooling time determination was also performed and the result shows that the detection of activity ratio $^{l44}$Ce $^{l37}$Cs by gamma-ray spectrometry would be usefully applicable to certify spent nuclear fuel for the purpose of safeguards and management in a facility in which the samples dismantled or cut from spent fuel assemblies are treated, such as the post irradiation examination facility.mination facility.

• Journal of Aquaculture
• /
• v.17 no.2
• /
• pp.144-150
• /
• 2004

This experiment was conducted to evaluate the parameters such as nutrient requirements, POY, AnV, Totox, VBN, total plate count, dietary fatty acids and amino acids composition, that are not included in the registered standard composition items required by the Ministry of Agriculture and Forestry, of a moist pellet (MP), three domestic extruded pellets (DEP-1, DEP-2, DEP-3), and two foreign extruded pellets (FEP-1, FEP-2) that are utilized by domestic flounder farms at present. The crude protein was added in excess of the dietary protein requirement in 6 kinds of feeds. When considering the proper PH ratio, it is obvious that protein was added in excess, especially in MP and FEP-2. Crude fat was also added in excess, especially in FEP-1. MP contained a higher dietary phosphorus content than formulated feeds, surpassing the dietary phosphorus requirement and greatly increasing the possibility for causing water pollution. The oxidation of fatty acid and decomposition of protein in MP were higher than in formulated feeds, and may also cause problems on fish farms. Also, it is difficult to store and manage MP, Among the fatty acids, EPA and DHA contents in MP were higher than those in formulated feeds. It is necessary to conduct further studies of EPA and DHA contents in formulated feeds. Lysine content in MP and FEP-2 could meet the dietary lysine requirement of flounder, however, the possibility of insufficient lysine content in the other formulated feeds was high and we considered that extra supplementation was necessary. Therefore, it is necessary to set up quality control standards according to fish species and sizes while considering the specific character of aquatic formulated feeds to restore the confidence of feed companies and aquaculturists to these feeds. This may be an opportunity to make an earlier change from MP to formulated feeds.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.147-158
• /
• 2004

Laboratory dynamic tests are carried out to assess the liquefaction potential of saturated sands in most countries. However, simple results such as the maximum cyclic shear stress and the number of cycles at initial liquefaction are used in the experimental assessment of liquefaction potential, even though various results can be obtained from the dynamic test. In addition, it seemed to be inefficient because more than three dynamic tests with different stress ratio have to be carried out to draw a liquefaction resistance experimental curve. To improve the present assessment method fur liquefaction potential, a new critical resistible characteristic far soil liquefaction is proposed and verified through conventional cyclic triaxial tests with Jumunjin sand. In the proposed method, various experimental data such as effective stress path, stress-strain relationship, and the change of excess pore water pressure can be used in the determination of cumulative plastic shear strains at every 1/4 cycle. Especially, the critical cumulative plastic shear strain to initiate liquefaction can be defined in a specific point called a phase change point in the effective stress path and it can be calculated from a hysteric curve of stress-strain relationship up to this point. Through this research, it is found that the proposed cumulative plastic shear strain can express the dissipated energy to resist dynamic loads and consider the realistic soil dynamic behavior of saturated sands reasonably. It is also found that the critical plastic shear strain can be used as a registible index of soils to represent the critical soil dynamic state, because it seems to include no effect of large deformation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.5
• /
• pp.13-35
• /
• 2020

Startup accelerators are a new type of investors providing a certain amount of shares for imparting education, mentoring, networking, and providing space and seed money that can directly resolve the difficulties faced by nascent entrepreneurs (Clarysse, 2016). Startup accelerators have expanded worldwide as their influence over the startup ecosystem has increasingly been established (Pauwels et al., 2016; Cohen & Hochberg, 2014). This study was conducted to derive investment determinants of startup accelerators that are emerging as major investment players around the world. To this end, the accelerator-type determinants of investment were derived. As previous research on this topic is nonexistent, this process involved qualitative meta-synthesis, literature reviews, observation, and in-depth interviews. First, more than 30 research papers were examined for the determinants of investment for firms at an early stage of their foundation, and the categories and determinants of investment in the relevant studies were comparatively analyzed using qualitative meta-synthesis. Further, related data were investigated to identify the characteristics of accelerators, and the startup evaluation process of US accelerators was studied. The more than 100 questions raised during this process were coded to examine the determinants of investment that accelerators considered important. In-depth interviews were conducted with four US accelerators to identify the characteristics of accelerators and key determinants of investment. Ultimately, 5 categories of accelerator-type determinants of investment and 26 subordinate determinants of investment were derived. The results were verified and supplemented by consulting with seven accelerators in Korea. The results were confirmed after pilot tests and verification by seven domestic accelerators. After confirming the accelerator-type determinants, the reliability of them was verified by examining the importance and priority of each category through the quantitative survey of Korean accelerators. The research that elicited the accelerator-type investment determinants is the first research and is expected to be a major reference to the progress of subsequent studies. This research that systematically derived the investment determinants of the accelerator is expected to make major contributions to the progress of follow-up studies, the process of selecting startups, and the investment decision-making process of the accelerators.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.133-144
• /
• 2006

According to the latest report by the Customer Protection Board, those who moved into newly constructed buildings are complaining about unidentified pains, asking for more careful selection of constructive materials for prevention of such potential problems. It is internationally recognized today that ecological materials can serve a significant factor for users' health, environmental protection and better industrial competitiveness. This study examined eco-design aspects of each interior material through web site search, in order to help customers learn about and capitalize on eco materials in a proper manner. As a result, 1. It turned out that the domestic industry are giving an impetus to releasing new eco items focusing on lower VOCs emission or addition of functional components as part of the marketing strategy. However, it is recommended that company understand significance of life cycle, and produce eco-concept materials. 2. The reliable standard for choosing the domestic material is EL, HB, GR marks. It is desirable to enhance recycling technologies and expand the sustainable consumption. customer class, since many recycled items are not developed. 3. The sourcing is a vulnerable part in terms of the concept of being environment-friendly material. Therefore, many manufacturers should design the easy knock-down products and produce the good items using recycled materials instead of new raw materials. Also solutions for making the energy from burning material should be studied. 4. The guidebook or manual with correct information about eco-materials is required to promote production and consumption with sustainable concept. 5. Many manufacturers are emphasizing ecological materials for customers, but some of them intended to disrupt customers' proper selection by promoting even unverified items to be environment-friendly.

• Journal of Korea Water Resources Association
• /
• v.49 no.7
• /
• pp.589-597
• /
• 2016

In this study, we investigated the use of satellite-derived flow (SDF) signals and a data-based model for the estimation of outflow for the river reach where in situ measurements are either completely unavailable or are difficult to access for hydraulic and hydrology analysis such as the upper basin of Imjin River. It has been demonstrated by many studies that the SDF signals can be used as the river width estimates and the correlation between SDF signals and river width is related to the shape of cross sections. To extract the nonlinear relationship between SDF signals and river outflow, Artificial Neural Network (ANN) model with SDF signals as its inputs were applied for the computation of flow discharge at Imjin Bridge located in Imjin River. 15 pixels were considered to extract SDF signals and Partial Mutual Information (PMI) algorithm was applied to identify the most relevant input variables among 150 candidate SDF signals (including 0~10 day lagged observations). The estimated discharges by ANN model were compared with the measured ones at Imjin Bridge gauging station and correlation coefficients of the training and validation were 0.86 and 0.72, respectively. It was found that if the 1 day previous discharge at Imjin bridge is considered as an input variable for ANN model, the correlation coefficients were improved to 0.90 and 0.83, respectively. Based on the results in this study, SDF signals along with some local measured data can play an useful role in river flow estimation and especially in flood forecasting for data-scarce regions as it can simulate the peak discharge and peak time of flood events with satisfactory accuracy.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.5
• /
• pp.909-928
• /
• 2020

From the early 1970s, the US government began to recognize that penetration testing could not assure the security quality of products. Results of penetration testing such as identified vulnerabilities and faults can be varied depending on the capabilities of the team. In other words none of penetration team can assure that "vulnerabilities are not found" is not equal to "product does not have any vulnerabilities". So the U.S. government realized that in order to improve the security quality of products, the development process itself should be managed systematically and strictly. Therefore, the US government began to publish various standards related to the development methodology and evaluation procurement system embedding "security-by-design" concept from the 1980s. Security-by-design means reducing product's complexity by considering security from the initial phase of development lifecycle such as the product requirements analysis and design phase to achieve trustworthiness of product ultimately. Since then, the security-by-design concept has been spread to the private sector since 2002 in the name of Secure SDLC by Microsoft and IBM, and is currently being used in various fields such as automotive and advanced weapon systems. However, the problem is that it is not easy to implement in the actual field because the standard or guidelines related to Secure SDLC contain only abstract and declarative contents. Therefore, in this paper, we present the new framework in order to specify the level of Secure SDLC desired by enterprises. Our proposed CIA (functional Correctness, safety Integrity, security Assurance)-level-based security-by-design framework combines the evidence-based security approach with the existing Secure SDLC. Using our methodology, first we can quantitatively show gap of Secure SDLC process level between competitor and the company. Second, it is very useful when you want to build Secure SDLC in the actual field because you can easily derive detailed activities and documents to build the desired level of Secure SDLC.

• Anxiety and mood
• /
• v.7 no.1
• /
• pp.48-53
• /
• 2011

Objective : Korean Version of Beck-II Depression Inventory to verify the reliability and validity of the proposed standards are practical and standardized, cut-off score by establishing a baseline indicating the presence of depression and depression On in the evaluation was to evaluate the clinical usefulness. Methods : 739 patients with major depression using the SCID and normal controls were 302 study subjects. Of patients with clinically significant medical condition, or psychotic disorders, organic mental disorder, epilepsy or seizure disorder, eating disorders are associated with patients taking anti-convulsants experienced in the past, patients were excluded from the study. Results : The main findings of this study were as follows. First, with respect to the KBDI-II items, the correlation between them ranged from 0.51 to 0.74, and was 0.60 over all questions. Further, the overall correlation of the KBDI-II plates showing confidence 'normal' than it was verified that. Second, the BDIII was used in each group to examine internal consistency and thus, whether Cronbach's alpha values were greater than 0.94. Third, the principal component analysis sought to extract factors in a way consistent with the results inspected last 3 factors were extracted and the total variance explained was 47.3%. Fourth, the Cutting calculated the score on the KBDI-II for ROC (Receiver operator characteristic) analysis yielding 18 dot, with the highest sensitivity and specificity was seen. Conclusion : Based on the results of this Study, the KBDI-II cut-off point should be valid as prescribed in 18 is considered.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.94-104
• /
• 2018

This study examined photogrammetric reconstruction techniques that can measure the original form of a cultural property utilizing photographs taken in the past. During the research process, photographs taken in the past as well as photograph on the internet of Soswaewon Garden in Damyang(scenic site 40) were collected and utilized. The landscaping structures of Maedae, Aiyangdan, Ogokmun Wall, and Yakjak and natural scenery Gwangseok, of which photographs can be taken from any 360 degree direction from a close distance or a far distance without any barriers in the way, were selected and tested for the possibility of reproducing three-dimensional shapes. The photography method of 151 landscape photographs (58.6%) from internet portal sites for the aforementioned five landscape subjects containing information on the date the photograph was taken, focal length, and exposure were analyzed. As a result of the analysis, it was revealed that the majority of the photographs tend to focus on important parts of each subject. In addition, we discovered that there are two or three photography methods that internet users preferred in regards to each landscape subject. For the purposes of the experiment, photographs in which a single scene consistently appears for each landscape subject and it was determined that there was a high level of preference related to the photography method were analyzed, and three-dimensional mesh shape model was produced with a photoscan program to analyze the reproducibility of three-dimensional shapes. Based on the results of the reproduction, it was relatively possible to reproduce three-dimensional shapes for artifacts such as Ogukmun wall, Maedae, and Aeyangdan, but it was impossible to reproduce three-dimensional images for natural scenery or an object that has similar texture such as Yakjak and Gwangseok. As a result of experimentation related to the reconstruction of three-dimensional shapes with the photographs taken on site using a photography method similar to that of the photographs selected as previously mentioned, there was success related to reproducing the three-dimensional shapes of Yakjak and Gwangseok, of which it was not possible to do so through the photographs that had been collected previously. In addition, through comparison of past and present images, it was possible to measure the exact sizes as well as discover any changes that have taken place. If past photographs taken by tourists or landscape architects of cultural properties can be obtained, the three-dimensional shapes from a particular period of time can be reproduced. If this technology becomes widespread, it will increase the level of accuracy and reliability in regards to measuring the past shapes of cultural landscape properties and examining any changes to the properties.

• (The)Study of the Eastern Classic
• /
• no.69
• /
• pp.45-82
• /
• 2017

This paper aims at concrete examination of the 'Official Road(官路)' of the late Joseon Dynasty through government administration of the 17th - 18th century 'Junsangseo(典牲署)'. Until now, the study of the central political system in the Joseon Dynasty was mainly studied by the politically important bureaucrat 'Dangsanggwan(堂上官)', and even if he studied the 'Official Road(官路)', he was a student from the a graduate of Mungwa(文科) and the 'Clean and imfortant Official(淸要職)' connected with it It was examined mainly. As a result, this research attempts to elucidate the routes of 'non - Clean and imfortant Official(非淸要職)' who have not been studied so far. However, it is difficult to deal with all the 'lower officials(參下官)' reaching 263 in total, so it was targeted at the 'Junsangseo(典牲署)' where the 'List of official(先生案)' exists in the 17th - 18th century. In chapter 2, we examined the historical value of 'List of official(先生案)' and were able to secure the confidence of the materials. In Chapter 3, we specifically examined the origins of officials from the 'Junsangseo(典牲署)', the official route, and the occupation. As a result, the 'Junsangseo(典牲署)' 'lower officials(參下官)' was predominantly from the 'Munum(門蔭)'. In addition, I confirmed that I was stepping on a public road that roughly promoted one rank. The number of days in office has also been promoted satisfying the court occupation days. Although this is an analysis limited to 'Junsangseo(典牲署)', it seems that 'lower officials(參下官)' of 'Junsangseo(典牲署)' had gone through routes and routes that were roughly similar to the 'lower officials' of the main office. If we can assume this, we can understand the character of the late Joseon Dynasty 'lower officials(參下官)' by understanding the character of 'lower officials(參下官)' of 'Junsangseo(典牲署)'. To declare this, more case analysis is necessary, and it is necessary to convert a lot of 'List of official(先生案)' data scattered nationwide into DB.