• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.170-170
• /
• 2012

최근 주목받고 있는 amorphous InGaZnO (a-IGZO) thin film transistors (TFTs)는 수소가 첨가된 비정질 실리콘 TFT (a-Si;H)에 비해 비정질 상태에서도 높은 이동도와 뛰어난 전기적, 광학적 특성에 의해 큰 주목을 받고 있다. 또한 넓은 밴드갭에 의해 가시광 영역에서 투명한 특성을 보이고, 플라스틱 기판 위에서 구부러지는 성질에 의해 플랫 패널 디스플레이나 능동 유기 발광 소자 (AM-OLED), 투명 디스플레이에 응용되고 있다. 하지만, 실제 디스플레이가 동작하는 동안 스위칭 TFT는 백라이트 또는 외부에서 들어오는 빛에 지속적으로 노출되게 되고, 이 빛에 의해서 TFT 소자의 신뢰성에 악영향을 끼친다. 또한, 디스플레이가 장시간 동안 동작 하면 내부 온도가 상승하게 되고 이에 따른 온도에 의한 신뢰성 문제도 동시에 고려되어야 한다. 특히, 실제 AM-LCD에서 스위칭 TFT는 양의 게이트 전압보다 음의 게이트 전압에 의해서 약 500 배 가량 더 긴 시간의 스트레스를 받기 때문에 음의 게이트 전압에 대한 신뢰성 평가는 대단히 중요한 이슈이다. 스트레스에 의한 문턱 전압의 변화는 게이트 절연막과 반도체 채널 사이의 계면 또는 게이트 절연막의 벌크 트랩에 의한 것으로 게이트 절연막의 선택에 따라서 신뢰성을 효과적으로 개선시킬 수 있다. 본 연구에서는 적층된 $Si_3N_4/SiO_2$ (NO 구조) 이중층 구조를 게이트 절연막으로 사용하고, 완충층의 역할을 하는 $SiO_2$막의 두께에 따른 소자의 전기적 특성 및 신뢰성을 평가하였다. a-IGZO TFT 소자의 전기적 특성과 신뢰성 평가를 위하여 간단한 구조의 pseudo-MOS field effect transistor (${\Psi}$-MOSFET) 방법을 이용하였다. 제작된 소자의 최적화된 $SiO_2$ 완충층의 두께는 20 nm이고 $12.3cm^2/V{\cdot}s$의 유효 전계 이동도, 148 mV/dec의 subthreshold swing, $4.52{\times}10^{11}cm^{-2}$의 계면 트랩, negative bias illumination stress에서 1.23 V의 문턱 전압 변화율, negative bias temperature illumination stress에서 2.06 V의 문턱 전압 변화율을 보여 뛰어난 전기적, 신뢰성 특성을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.364-374
• /
• 2012

The purpose of this study is to perform the reliability-corrected development cost estimation of the launch vehicle at the conceptual design phase. In order to estimate the launch vehicle development cost, the estimation method based on the independent variable such as the rocket performance and dry mass has been mainly implemented up to now. This approach has made the approximate cost estimation possible, however, the cost variation according to the reliability requirement could not be reflected. In this paper, the cost estimation methodology that introduces the reliability factor in addition to the performance and mass in the TRANSCOST model is presented in order to improve the limitation of current cost estimation method. The development cost of KSLV(Korea Space Launch Vehicle)-II is estimated on the basis of this newly implemented concept with reliability as an added parameter.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.649-655
• /
• 2003

Network-based computing such as cluster computing requires a reliable high-speed transport protocol. TCP is a representative reliable transport protocol on the Internet, which implements many mechanisms, such as flow control, congestion control, and retransmission, for reliable packet delivery. This paper, however, finds out that Myrinet does not incur any packet losses caused by network congestion. In addition, we ascertain that Myrinet supports reliable and ordered packet delivery. Consequently, most of reliable routines implemented in TCP produce unnecessarily additional overheads on Myrinet. In this paper, we show that we can attain the reliability only by flow control on Myrinet and propose a new reliable protocol based on UDP named RUM (Reliable UDP on Myrinet) that performs a flow control. As a result, RUM achieves a higher throughput by 45% than TCP and shows a similar one-way latency to UDP.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.217-227
• /
• 1992

The first and second-order reliability method(FORM and SORM) is presented using one dimensional finite difference and two dimensional finite element transport models. FORM and SORM can be used without any restrictive assumptions about the properties of the media, and the sensitivity information obtained as part of these analyses is used to identify the parameters which have major influence on the estimate of probability. The reliability analysis of transport in a one-dimensional domain is used to test the robustness of the reliability code and to evaluate the accuracy of the reliability method. A continuous source 2-D example with a concentration threshold limit state function is used to evaluate the influence of the parameters in the location of interest on the reliability solution.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.393-404
• /
• 2005

The environmental problem is a main subject of the 21C and an environment destruction phenomenon by various kinds of environmental materials is reaching serious level. Nations to be classified as the environmental developed country, are born again environmental rich country. And they earn a large income by trade Every kind environmental resource in an international commercial transaction. Especially, the study that a reliability assessment method to prevent to reliability problem to be happened when the solder lead(lead-free solder), non-cd component, non-bromide component(without the polybrominated biphenyls(PBB) and polybrominated diphenyl ethers(PBDE))and hexavalent chromium(Cr VI) clearance component and mercury-free applied to electronic equipment is progressed. As the result of the study for applying of a reliability assessment technique of lead-free solder that recognized the most of urgent problem at the company, combination accelerated life test could taken by adding and appling the part of a humidity acceleration part to Eyring Model which is proposed by R.E.Thomas. The reliability assessment methods study of PWB clean environmental materials is expected to respond to a reliability elevation and environmental material regulation policy spreading all over the world by beginning form Europe.

• Journal of Venture Innovation
• /
• v.6 no.4
• /
• pp.133-151
• /
• 2023

The purpose of this study is to examine the correlation between medical service quality, customer trust, customer satisfaction and customer loyalty in domestic convalescent hospitals. Participants in this research were individualis who assumed responsibility for being the main caretaker of patients that were in hospitalization The following main results were derived. First, among the quality of medical services, tangibles, realiability, responsiveness, empathy were found to have a significant positive effect on customer trust. Second, among the quality of medical services, tangibles, realiability, responsiveness, assuracne, empathy were found to have a significant positive effect on customer satisfaction. Third, among the quality of medical services, only realiability variable were found to have a significant positive effect on customer loyalty. This result means that customer satisfaction and customer trust plays a mediating role between the medical service quality and loyalty. Fourth, customer trust was found to have a significant positive effect on customer loyalty. Fifth, customer satisfaction was found to have a significant positive effect on customer loyalty.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.5 s.60
• /
• pp.627-639
• /
• 2002

Bridge construction is almost complete in many countries. Thus, the government and highway agencies change their focus from constructing to maintaining. Effectively maintaining bridges require predicting their lifespan using a system reliability viewpoint. Likewise, maintenance models based on the system reliability concept should be developed. Thus, this study developed maintenance models for preventive maintenance and essential maintenance using system reliability and lifetime distributions. The optimal maintenance strategy for an existing bridge was obtained using the developed maintenance models.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.115-121
• /
• 2000

영광1,2,3,4호기 비상디젤발전기(EDG)의 신뢰도 수준을 파악하기 위하여 시험관리대장과 운전불능관리대장, 그리고 발전과장일지를 조사하여 신뢰도 및 이용불능도를 분석하였다. 신뢰도는 EDG의 유효시험 데이터를 이용하여 계산하는 유효 신뢰도와 무효시험까지 포함하여 계산하는 전체 신뢰도로 구분하였으며, 이용불능도는 EDG를 정비모드로 전환시키고 작업함으로서 이용불능을 유발하였던 정비 이용불능도, 그리고 유효시험 실패로 인하여 정비모드를 유발하는 경우에 잠재적 고장 시간까지 포함한 종합 이용불능도로 구분하였다. 분석 결과로서 영광1호기 EDG의 유효 신뢰도는 0.995, 2호기는 1.0으로 매우 높은 수준을 유지하고 있었으며, 이용불능도의 역인 이용가능도는 1호기 A계열 EDG는 0.978, B계열은 0.979, 2호기 A는 0.991, B는 0.976으로 높은 수준이었다. 3,4호기 EDG의 유효 신뢰도는 1,2호기와 마찬가지로 높은 수준이었으나, 전체 신뢰도는 텐덤형 디젤엔진이 갖는 근본적 부하불균형 문제 때문에 낮은 수준이었다. 따라서, 영광3,4호기 EDG의 신뢰도를 높이기 위해 많은 노력을 기울였으며, 이를 통해 EDG 신뢰도 개선에 도움이 된 것으로 분석되었다.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.553-560
• /
• 2003

Can presume number of software failure or remaining fault that is expected with test data that is collected by decided time using SRGM that is studied until present. Therefore, can forecast software reliability achievement degree and software reliability use step. But, reliability evaluation according to if choose any model can change. Therefore, we present SRGM that consider test cost to error detection and error delete cost as SRGM that consider error delete cost in this research. Using this SRGM, can presume number of remaining fault in software, reliability and optimal release time.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.3
• /
• pp.727-742
• /
• 2006

In general, weapon systems require very high reliability. Recently Korean defense reliability technologies growth rapidly. However, there are some matters of reform in reliability management, reliability assurance, and defense acquisition environment, etc. In this paper, we propose the reliability development plan for Korean defense system as follows; 1) reliability improvement programs for each acquisition stages, 2) reliability improvement methods for logistics support, 3) reliability improvement programs for developers and manufacturers, 4) reform matters for the defense acquisition law, 6) establishment of defense reliability assessment center and defense reliability committee.