• 제목/요약/키워드: 시효경화 효과

검색결과 15건 처리시간 0.022초

고온변형시 Zr-2.5wt%Nb합금에서의 어닐경화와 유동연화거동

  • 최성배;권숙인;황선근;김명호;김영석;정용환
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1996년도 춘계학술발표회논문집(3)
    • /
    • pp.253-258
    • /
    • 1996
  • 본 연구는 Zr-2.5wt%Nb합금의 고온변형특성중 특이한 유동응력의 변화거동인 어닐경화와 유동연화의 기구에 대해 고찰하였다. 연구결과에서 이러한 고온변형특성은 온도와 다단변형도중의 어닐링 시간에 영향을 받는 것으로 나타났으나 분위기 영향은 없는 것으로 나타났다. 즉, 변형 온도와 동일온도인 85$0^{\circ}C$에서 단시간인 5분동안 어닐링을 했을때 경화현상이 일어났다. 미세조직을 관찰한 결과 다단열간압연된 후의 미세조직과 집합조직은 다단열간압연된 미세조직과 집합조직과 직접적인 상관관계를 가진 것으로 나타났다. 어닐경화현상은 다단고온변형이 궁극적으로 변형시효와 유사한 효과 즉, 중간어닐링 동안에 Zr-2.5wt%Nb내의 불순물 원자와 열간압연시에 형성된 전위구조와의 강력한 인력형 상호작용하여 substructure가 안정화되기 때문이며 유동연화는 재결정으로 인한 유동응력의 감소인 것으로 사료된다.

  • PDF

스퀴즈 캐스팅 제조법에 의한 자동차 엔진 마운틴 브래킷 개발에 관한 연구 (A Study on the Development for the Vehicle Engine Mountion Bracket Using Squeeze Casting)

  • 김순호
    • 동력기계공학회지
    • /
    • 제7권4호
    • /
    • pp.44-48
    • /
    • 2003
  • Alumium alloys casting are gaining increased acceptance in the automotive and electronic industeries and squeeze casting is the most efficient method of manufacturing such mass produced parts. This study has been investigated the microstructures and mechanical properties of Al-7.0Si-0.4Mg(AC4C)alloy fabricated by squeeze casting process for development of Engine Mountain Bracket. The microstructure of squeeze casted specimen were composed of eutectic structure Alumimim solid solution and $Mg_2Si$ precipitates. The tensile strength of as-solid solution treatment Al-7.0Si-0.4Mg alloy revealed 2985MPa. It was found that Al-7.0Si-0.4Mg alloy have good aging hardening effect results are presented to show the validity of the control method.

  • PDF

급속냉각한 Al-5Cr-2Zr 합금의 시효경화에 미치는 기계적 합금화 처리효과 (Effects of Mechanical Alloying Treatment on Age Hardening Behavior of Rapidly Solidified Al-5Cr-2Zr Alloy)

  • 김완철
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제18권5호
    • /
    • pp.29-35
    • /
    • 1994
  • The microstructual refinement process of Al-5Cr-2Zr alloys mechanical alloying 30h can be divided in five stages ; initial stage, welding predomminance stage, spherical partical formation stage, convolution welding predominance stage, and steady state. The rate of structural of aluminium splats was roughly logarithmic with processing time ; ${\in}$=k/0.78 ln(1+0.0028t). The age hardening in rapidly solidified Al-5Cr-2Zr alloys is ascribed to the coherency and dispersion hardening. Coherency hardening is occurred by matastable cubic Al3Zr precipitates in Al-Cr-Zr alloys. Dispersion hardening after mechanical alloying is attributed to the finely-dispersed $Al_2O_3$ and $Al_4C_3$ in Al-5Cr-2Zr alloys.

  • PDF

LPG 용기 밸브용 O-링의 누설안전성에 관한 해석적 연구 (Numerical Study on the Leakage Safety of O-rings for a LPG Cylinder Valve)

  • 김청균;김도현
    • 한국가스학회지
    • /
    • 제11권2호통권35호
    • /
    • pp.37-42
    • /
    • 2007
  • 본 논문에서는 밸브몸체와 밸브스템 사이의 사각그루브에 설치한 두 개의 O-링에 대한 누설 안전성을 해석한 결과를 제시하고 있다. O-링시일의 누설 안전성에 대한 해석은 압축률과 LPG 가스압력의 변동에 따라 발생되는 누설 안전성을 유한요소해석 프로그램 MARC로 계산하였다. FEM 해석결과에 따르면, LP가스 충전압력 $8kg/cm^2$에서 안전변의 안전한 작동압력 상한치 $24.8kg/cm^2$에 이르기까지 압력하중을 압력용기 안전기준에 의거 계산한 결과는 안전한 것으로 나타났다. 다만, 두 개의 O-링의 안전성을 충분하게 확보하기 위해서는 O-링소재의 시효경화 효과를 고려하는 것이 바람직하다.

  • PDF

기계적합금화에 의한 $AC4A/SiC_p$복합재료의 제조 및 기계적 특성 (Fabrication and mdchanical properties of $AC4A/SiC_p$ composites by mechanical alloying)

  • 이병훈;조형준;임영호;이준희
    • 한국재료학회지
    • /
    • 제4권6호
    • /
    • pp.651-661
    • /
    • 1994
  • 급냉응고법과 기계적합금화를 병행하여 자동차 산업용 부품에 널리 사용되고 있는 AC4A 합금에 열적으로 안정한 $SiC_p$세라믹 입자를 첨가하여 가공경화 및 미세균일화에 의한 분산강호 효과를 갖는 복합재료를 제조하고, 그에 따른 기계적특성을 조사하여 다음과 같은 결과를 얻을 수 있었다. 420분간 기계적합금화를 시켰을 때 10~20$\mu \textrm{m}$ 정도의 미세하고 균일한 구형의 복합분말을 얻을수 있었으며, 이 상태에서 정상상태를 의미하는 포화 경도값이 나타났다. 기계적합금화에 따른 분말의 X-선 회절시험에서 기계적 합금화 시간에 따라 결정립 미세화와 불균일 변형에 의해 강도가 떨어지고, 회절폭이 넓어진다. 분말 압출재의 시효경화는 1000분 시효에서 최대 경도값을 나타낸다. 인장시험에 있어서 압출재는 주조재에 비해 2배 이상의 인장값을 얻을 수 있었으며, $500^{\circ}C$에서도 우수한 인장값을 얻을 수 있었다.

  • PDF