• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.9-16
• /
• 1999

We suggest the image recognition algorithm for automatic decision of EUT malfunction using computer vision in the radiant electromagnetic field. We monitor and analyze the EUT malfunction through the numerical value change of electro-measurement and medical instruments, or the image distortion of PC monitor. We could decide EUT malfunction by comparing the object image in the electromagnetic field with the reference image or by recognizing the numerical value change on the video camera monitor. We can show the evidence of EUT malfunction decision and reduce the possibility of malfunction in the tolerance test.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.483.1-483.1
• /
• 2014

태양광 시스템의 발전량의 증가로 인하여 높은 전위차에 의한 새로운 형태의 태양전지 모듈의 열화 및 출력 감소가 보고되고 있다. Potential induced degradation (PID) 이라고 불리는 이 현상은 고 전위차가 모듈을 구성하는 태양전지와 프레임 사이에 인가되며 발생하는 열화 현상이다. PID의 발생은 태양전지와 프레임 사이의 누설 전류의 크기를 통하여 간접적으로 설명이 되고 있다. 그리고 PID의 해결 방법으로 이 누설 전류를 줄이기 위하여 모듈의 구성 재료를 변화시키는 연구가 보고되고 있다. 하지만 아직 누설 전류와 출력 감소의 연관성에 대한 설명이 부족하고 정확한 발생 원인은 밝혀지지 못한 상황이다. PID가 발생된 이후 태양전지에 발생된 변화를 관찰하기 위하여 항온, 항습 챔버와 고전압 발생 장치에서 PID 시험을 하였다. 서로 다른 두 종류의 태양전지를 사용하여 시간에 따른 PID 현상의 차이점을 살펴보았고 출력 변화를 light IV로 관찰하였다. 또한 시간에 따른 모듈의 전기적 특성의 변화는 dark IV와 electroluminescence (EL)를 이용하여 측정하였다.

• The KSFM Journal of Fluid Machinery
• /
• v.8 no.4 s.31
• /
• pp.20-26
• /
• 2005

When the pumps are started or stopped for the operation or tripped due to the power failure, the hydraulic transients occur as a result of the sudden change in velocity. The field tests on the waterhammer were carried out for Pangyo booster pumping station in which had six booster pumps and two in-line pumps with the motor of output 1,700 kW, respectively. The booster pumping station was equipped with the pump control valve as the main surge suppression device, and the surge relief valve as auxiliary one. But the pump control valve had not early controlled in the planned closing mode, the slamming occurred to the valve of which abruptly closed during the large reverse flow. Because the positive pressure wave caused by the pump failure was superposed on the slam surge, the upsurge increased so extremely that the pump control valve was damaged. After the air chambers were additionally installed in the booster pumping station, it was preyed that the water supply system acquire the safety and reliability on the pressure surge.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.172-174
• /
• 2011

표면경도와 내마모특성을 가진 질화처리는 다양한 철강재료에 적용되고 있다. 플라즈마를 이용한 질화법은 다른 질화처리법에 비해 처리시간이 짧고 폐수 및 배기가스와 같은 오염물질의 발생이 거의 없어 친환경적이며 낮은 온도에서 처리가 가능하기 때문에 변형 및 금속학적 물성의 변화가 없는 것이 특징이다. 한편 DLC 처리법은 물리화학적 특성이 다이아몬드와 유사하면서도 저온 합성이 가능하고, 표면이 평활하다는 합성기술상의 장점을 가지고 있기 때문에 많은 분야에서의 응용이 연구되고 있는 재료이다. 특히 고경도, 고윤활성 등의 물리적, 화학적, 광학적 특성과 화학적 안정성과 신체적합성 등의 특성으로 인해 기계부품, 공구, 광학기기, 전자부품, 자동차부품과 의료용 기기분야 등에 적용하고 있다. 본 연구에서는 질화처리 및 DLC 처리를 한 챔버내에서 동시처리하여 그 특성을 평가하였다. 이와같이 얻어진 처리물을 Field Emission Scanning Electron Microscope를 이용하여 단면분석을 하였고, 시편의 경도는 나노인덴터로 측정하였다. ball-on-disk 방식의 마모시험기를 이용하여 내마모특성을 관찰하였으며, 접합력을 측정하기 위해 스크래치 테스트를 실시하였다.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.208-216
• /
• 2004

The waterhammer occured when the pumps are started or stopped for the operation or tripped due to the power failure, the hydraulic transients occur as a result of the sudden change in velocity. The field tests of the waterhammer were carried out for PanGyo booster pumping station. The PanGyo pumuing station was installed booster pump of 6 sets and in-line pump of 2 sets. The main surge suppression device was equipped with the pump control valve and the surge relief valve as auxiliary. However, the pump control valve had not early controlled in the planned closing mode, and the slamming occurred to the valve of which abruptly closed during the large reverse flow. Because the pressure wave caused by the pump failure was superposed on the slam surge, the upsurge increased so extremely that the shaft of the valve was damaged. After the addition surge suppression device was equipped with air chamber. Further more in-line pump is needed surge suppression device that the pumping station acquired the safety and reliability for the pressure surge.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.26-33
• /
• 2014

The gas-centerd swirl injectors are widely used on the main combustor of large liquid propellant rocket engines. Since the gas-liquid propellants, such as kerosene and oxygen-rich gas combination, are mixed and burned in the high pressure condition over the critical pressure point, the cold-flow spray test in the atmospheric condition can not represent the actual spray pattern. To observe the near actual spray patterns of gas-centered swirl injector, the high pressure spray chamber and the control system were constructed. The operating sequence was controlled precisely to obtain clear visualization images.

• Fire Science and Engineering
• /
• v.28 no.2
• /
• pp.9-13
• /
• 2014

This paper is basic study for development of the photoelectric-type smoke detector that is able to distinguish fire source as well as fire detection. For this subject, Light source and sensor which is normally used for the conventional smoke detector are assembled for the optical chamber. Using 3 type of the test fires (the paper fire, the wood fire, the flammable liquid fire) this paper attempts to find optical properties of each fire. These 3 type of fire are used in the testing of smoke detector according to UL 268 standard. As the result, there are disambiguated between the paper fire and the wood fire in scattering and reason of extinction in the flammable liquid fire is different from that of the paper and the wood fire.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.2 s.69
• /
• pp.22-28
• /
• 2006

The motion and wave drift forces of floating BBDB (backward-bent duct buoy) wave energy absorbers in regular waves are calculated, taking account of the oscillating surface-pressure due to the pressure drop in the air chamber above the oscillating water column, within the scope of the linear wave theory. A series of model tests has been conducted in order to order to verify the motion and time mean wave drift force reponses in regular waves at the ocean engineering basin, MOERI/KORDI. The pneumatic damping through an orifice-type duct for the BBDB wave energy device are deducted from experimental research. Numerical simulation for motion and drift force responses of the BBDB wave energy device, considering pneumatic damping coefficients, has been carried out, and the results are compared with those of model tests.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.51-52
• /
• 2013

본 논문에서는 박막형 태양전지 및 LCD 제조공정에서 증착 공정 후 챔버 내부에 쌓이는 Si(실리콘)을 화학적으로 세정하기 위한 F(불소) RADICAL을 공급하는 원격 고밀도 플라즈마를 발생시키기 위한 고출력 Generator에 대해 소개하고자 한다. 개발되어진 Generator는 입력 직류전원을 공유하여 7kW급 단일 Power Amp Module의 상호결합 및 전력분담에 대한 편차 극복을 위한 기술과 고조파 저감비가 우수한 대전력 필터를 구현하였고, 크기 및 부피의 축소를 위하여 필터의 Q Factor의 극대화 기술이 적용되어졌다. 개발된 400kHz 30kW Generator는 NF3 60리터의 대용량 Remote Plasma Source의 리액터를 구동시킬 수 있으며, 38kW급 DC Link, 7kW급 Power Amp module, LC 필터, Controller로 구성되어 진다. 개발된 장치는 실제 플라즈마 공정에서 시험 평가한 결과를 통해 검증할 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.40 no.12
• /
• pp.719-723
• /
• 1996

An inverse photoemission spectrometer has been built and tested to study the unoccupied electron energy states of solid surfaces. It consists of a low energy electron gun and a band pass photon detector in an ultra-high vacuum chamber. The electron ray tracing simulation and current measurement of the electron gun show a good focus and a high flux of electron current. The overall resolution of the spectrometer is 0.74 eV and the sensitivity of the photon detector is about 10 counts/$sec{\cdot}{\mu}A.$ As a test experiment, the inverse photoemission spectra of a Ge(111) sample is in good agreement with the theoretical result.