• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.496-502
• /
• 2015

Hydrocarbon dew point(HCDP), a property which is the most generally used for describing natural gas condensation, is a very important parameter of natural gas quality specifications. HCDP is strongly influenced by the concentration of the heavier hydrocarbon components, especially $C_6+$, so, along with compliance with gas quality specifications, build up of procedures for obtaining accurate HCDP is essential for gas transmission company, because hydrocarbon condensation present may cause serious operational and safety problems. This study has been carried out in an attempt to measure HCDP accurately by the automatic hydrocarbon dew point meter under the actual field conditions. Measured HCDP also has been compared with calculated HCDP using the composition determined by gas chromatograph and industry accepted equation of state at multiple pressures, along with the cricondentherm. The test results are 1) the automatic hydrocarbon dew point meter was able to measure stable HCDP continuously 2) the automatic hydrocarbon dew point meter has been performed reference measurement by pure propane with a known dew point from literature, and 3) A meaningful differences was observed when comparing the automatic hydrocarbon dew point meter and gas chromatograph results for synthetic standard gas mixtures and real gas mixtures.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.141-149
• /
• 2020

The Korea Industrial Standards (KS) stipulates methods and test procedures for measuring the horizontal combustibility of cellular plastics exposed to small flames (KS M ISO 9772:2018) and recommendations regarding the magnetic digestion of extruded polystyrene insulation (XPS) for measurement results (KS M 3808:2020). Although products that are certified to conform to KS standards must have burning characteristics (self-extinguishing), they are incinerated and spread by welds at construction sites, causing significant human and property damages. In this study, XPS produced by five companies, certified by KS, and sold in the market were purchased and tested for ignition and diffusion caused by a weld bullion at a construction site. The results showed that the five products had differences in performance. Three out of the five products were found to be self-saturated, but the other two were easily ignited and diffused, making it difficult for them to be self-extinguishing. Based on the result of this experimental investigation in line with the KS regulations, all the three types of products, including two types of products that were incinerated through weld defects, were found to be non-self-extinguishing, as specified in KS M 3808.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.796-805
• /
• 2016

As a part of the first stage in the helicopter flight simulator development, this study numerically evaluates handling qualities of the dynamics model. The flight dynamics model was generated using public information for AS365 N2, the target aircraft of the simulator. The flight simulator is under development as a pilot training and research tool for firefighting missions. The assessment of the model intends to validate general characteristics and suitability before the model is enhanced with flight test data. The evaluation is based on the ADS-33E-PRF(Aeroautical Design Standard Performance Specification Handling Qualities Requirement) criteria, with consideration of category of the aircraft, missions, and environment. The numerical operations follow required or recommended procedures of flight test for compliance demonstration. Evaluation results are evaluated according to the rating specified in maneuverability ADS-33E-PRF. Results have identified to provide a satisfactory platform for flight dynamic model in the general helicopter simulator generated based on the RotorLibFDM, and can be used as a base for basic training and research.

• Journal of radiological science and technology
• /
• v.33 no.4
• /
• pp.387-394
• /
• 2010

In the field of healthcare, the conventional sterilization treatments have been replaced by irradiation methods which are in accordance with internationally well established quality standards. The quality control in radiation sterilization assures that the absorbed dose of the irradiated material is in agreement with its requirements and standards. The electron beam irradiation requires technical assessments of more process parameters than gamma irradiation does. Korea has witnessed wide uses of electron accelerators since early 2000 but there hasn't been research experiences relating to quality system in accordance with international standards. The new large scale e-beam irradiation system with the specification of 10 MeV, 8 kW was installed and operated in 2008 by Seoul Radiology Services Co. It consists of the electron accelerator, product handling system, safety, documentation and control subsystems into an integrated system to meet the requirement of the Good Manufacturing Practice such as process quality assurance and management of product tracking records. To implement the international standard such as EN ISO11137, it is necessary to understand the purposes aimed in the standard and carry out the tests following the procedures required. This study presented the specification of the e-beam facility and showed what its design requirements and features are. The test results on a variety of process parameters were presented and validated it they are within the required limits.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.3-3
• /
• 2010

이번 성원에드워드 학술상 수상자 선정은, 진공기술의 중요성에 공감하고 진공기술 발전을 위한 노력을 독려하자는 진공학회 회원들의 의견을 모아주신 결과로 생각한다. 본 발표에서는 그동안 한국표준과학연구원에서 수행해 온 진공 기술 연구 및 산학연 협력 네트워크 활동을 소개하고자 한다. 진공기술은 진공 환경을 발생시키고 측정 제어하며, 만들어진 진공 환경 안에서 원하는 작업을 할 수 있도록 하는 기술을 말한다. 우리나라의 주력산업인 반도체 및 디스플레이의 경우 그 생산 설비의 1/3이상이 진공 장비이며 진공 공정을 통해 만들어진다. 때문에 우리나라에서는 주력 산업분야나 그 전후방 산업의 경쟁력 강화 측면에서 진공기술 개발 중요성이 아주 크다. 한국표준과학연구원은 국가 대표 측정 기관으로 국가 측정 표준을 확립하고 측정관련 과학기술을 연구개발하며 그 성과를 보급하여 경제발전과 과학기술발전, 그리고 삶의 질 향상에 기여하는 것을 임무로 하고 있다. 우리나라에서 진공 측정 표준에 대한 연구가 본격적으로 시작된 것은 1984년으로 불용 장비로 불하받은 펌프와 챔버, 그리고 차관으로 도입된 Capacitance Diaphragm Gauge 몇 개만으로 시작되었다. 지금은 발전을 거듭하여 초음파 간섭 수은주 압력계를 비롯하여 정적 팽창시스템, 동적 팽창 시스템 등 진공도 범위별 국가 표준기와 리크 표준기를 자체 개발 하여 국가 측정 표준을 확립하고 있다. 우리나라의 진공 표준 및 측정 능력은 국제기구인BIPM에서 실시하는 국가 측정능력 비교시험을 통해 세계 최고 수준으로 인정 받은 바 있으며 교정검사 등을 통해 산학연에 보급되고 있다. 진공 측정 및 표준기술을 토대로, 1999년부터 과학기술부와 산업자원부의 지원을 받아 산학연이 필요로 하는 펌프 계측기 부품 소재 및 공정 특성을 평가하기 위한 장치와 절차를 개발하였다. 이를 이용해 보급되는 기술 data는 진공부품 및 장비 국산화, 국산제품 신뢰성 제고, 검증부품 사용을 통한 장비 품질 향상, 독자적 장비 기술 확보, 생산품 품질관리 등에 쓰이고 있다. 한국 표준연구원 진공센터의 교정 및 시험 능력은 ISO 9001 인증 획득과 국제 전문가의 review를 거쳐, 국제기구 측정능력표에 등재되어 있어 국제적 신뢰도도 확보하고 있다. 정기적인 진공기술 교류회를 개최하고 진공기술 홈페이지를 운영 하는 등 산학연 정보 교류 및 협력 네트워킹 활성화를 위해 노력한 바 있으며 이 분야의 연구 성과는 '국가 우수 연구성과 100선'에 선정된 바 있고, 산업자원부 지정 '산학연 연계 우수사례' 첫 번째로 선정되기도 하였다. 2008년부터는 진공기술 교류회 등을 통한 네트워킹 활동으로 도출된 기술 수요에 따라 대기업과 중소기업 학교 연구소들과 함께 진공공정 실시간 측정 진단 기술과 센서 개발 연구, 그리고 이들 개발품의 신뢰성 검증 및 평가 기술 개발을 위해 노력하고 있다.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.647-657
• /
• 2018

This study was carried out to review as criteria for zoning at management plan for river restoration, in case of naturalness of river environment and suitability of water friendly activity suggested at assessment system of river environment in Korea. As a result of reviewing law and guidelines concerned, historic & cultural resources used as criteria for preservation zone, it was judged that the historical and cultural value as the preservation zone needs to be examined in connection with waterfriendly activity zone. In this study, we propose a sequential evaluation method to distinguish the waterfriendly activity zone by applying suitability of waterfriendly activity reflecting land use social characteristics, followed division of preservation and restoration zone at the first stage by the naturalness of river environment reflecting the natural environmental characteristics as a result of application to the test bed, Gap and Yudeung streams. In particular, it was concluded that the results of the present study provided more clear criteria for the problem that the last criteria for zoning did not reflect the difference between the left and the right side of stream, or the designation of the excessive water friendly zone. On the other hand, the criteria for designation in this study reflect the characteristics of various river environments as well as the setting of assessment unit based on the physical characteristics of rivers, and other legal regulations and local situations should be adjusted and supplemented in administrative procedures.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.235-249
• /
• 2020

The Ministry of Land, Infrastructure and Transport established safety standards for Level 3 autonomous vehicles for the first time in the world in December 2019, and specified the safety standards for conditional autonomous driving systems. Accordingly, it is necessary to analyze the influence of various driving environments on take-over. In this study, using a driving simulator, we investigated how traffic conditions and weather conditions affect take-over time and stabilization time. The experimental procedure was conducted in the order of preliminary training, practice driving, and test driving, and the test driving was conducted by dividing into a traffic density and geometry experiment and a weather environment experiment. As a result of the experiment, it was analyzed that the traffic volume and weather environment did not affect the take-over time and take-over stabilization time, and only the curve radius affects take-over stabilization time.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.2
• /
• pp.147-155
• /
• 2024

Gallium-68-prostate-specific membrane antigen-11 (⁶⁸Ga-PSMA-11) is a positron emission tomography radiopharmaceutical that labels a Glu-urea-Lys-based ligand with ⁶⁸Ga, binding specifically to the PSMA. It is used widely for imaging recurrent prostate cancer and metastases. On the other hand, the preparation and quality control testing of ⁶⁸Ga-PSMA-11 in medical institutions takes over 60 minutes, limiting the daily capacity of ⁶⁸Ge/⁶⁸Ga generators. While the generator provides 1,110 MBq (30 mCi) nominally, its activity decreases over time, and the labeling yield declines irregularly. Consequently, additional preparations are needed, increasing radiation exposure for medical technicians, prolonging patient wait times, and necessitating production schedule adjustments. This study aimed to reduce the ⁶⁸Ga-PSMA-11 preparation time and optimize the automated synthesis system. By shortening the reaction time between ⁶⁸Ga and the PSMA-11 precursor and adjusting the number of purification steps, a faster and more cost-effective method was tested while maintaining quality. The final synthesis time was reduced from 30 to 20 minutes, meeting the standards for the HEPES content, residual solvent EtOH content, and radiochemical purity. This optimized procedure minimizes radiation exposure for medical technicians, reduces patient wait times, and maintains consistent production schedules, making it suitable for clinical application.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.81-98
• /
• 2004

This study is to conduct the basic study for the achievement and assessment standards for the subject of 'Human Development' and 'Food and Nutrition', which are the curricula of Vocational Home Economics High Schools. These two subjects were newly adopted in the Vocational study Section of the 2005 College Entrance Examinations. In other words, this study is to provide the basic data for implementing the quality education based on the proper assessment of the curricula. For this purpose. this study analyzed the character & objective of 'Human Development' and 'Food and Nutrition'. Secondly. through the theoretical review for the concept & necessity of absolute evaluation standards. this study ensures the concept of achievement and assessment standards. and also designs the developing measures (including procedures). The achievement standards were developed by the following 5 step procedures. (1) Analyzing the objectives & contents of curricula. (2) Designating the development field of achievement standards (3) Developing the achievement standards. (4) The assessment of achievement standards. (5) Confirming the achievement standards. The assessment standards were developed by the following 5 step procedures. (1) Analyzing the achievement standards, (2) Designating the assessment field (3) Developing the assessment standards (4) Evaluating the assessment standards (5) Confirming the assessment standards Thirdly, this study suggested the exemplary achievement standards and assessment standards for the subject of Human Development, Food and Nutrition. Future study needs some critical review for the method of developing achievement and assessment standards for the subject of Human Development, Food and Nutrition. For example. the properness of 'Contents Element' which was designated as the developing field in the achievement standards, the discussion on validity of Contents Element abstract. the base of evaluating classification in terms of low, middle and high level, and other things should be considered through critical discussion. Especially the follow-up study should include the development of various evaluating methods to enable the clear communication for the achievement and assessment standards based on abstract concept and theory, thereby it could enable the actual interpretation and practical use.

• Progress in Medical Physics
• /
• v.23 no.2
• /
• pp.114-122
• /
• 2012

For the determination of absorbed dose to water from a linear accelerator photon beams, it needs a exposure calibration factor $N_x$ or air kerma calibration factor $N_k$ of air ionization chamber. We used the exposure calibration factor $N_x$ to find the absorbed dose calibration factors of water in a reference source through the TG-21 and TRS-277 protocol. TG-21 used for determine the absorbed dose in accuracy, but it required complex calculations including the chamber dependent factors. The authors obtained the absorbed dose calibration factor $N_{dw}{^{Co-60}}$ for reduce the complex calculations with unknown $N_{dw}$ only with $N_x$ or $N_k$ calibration factor in a TM31010 (S/N 1055, 1057) ionization chambers. The results showed the uncertainty of calculated $N_{dw}$ of IC-15 which was known the $N_x$ and $N_{dw}$ is within -0.6% in TG-21, but 1.0% in TRS-277. and TM31010 was compared the $N_{dw}$ of SSDL to that of PSDL as shown the 0.4%, -2.8% uncertainty, respectively. The authors experimented with good agreement the calculated $N_{dw}$ is reliable for cross check the discrepancy of the calibration factor with unknown that of TM31010 and IC-15 chamber.