• Journal of Animal Environmental Science
• /
• v.17 no.1
• /
• pp.11-22
• /
• 2011

This work was carried out to investigate the quantity of manure excreta and characteristics in growth and production phase of Holstein dairy cattle. The average manure production of dairy cattle under condition of ad libitum feeding was 41.5 kg/head/day (feces 24.9, urine 16.4 kg). The average moisture contents of feces and urine were 85.0% and 93.9%, respectively. Water pollutant concentration, $BOD_5$, $COD_{Mn}$ and SS excreted from dairy cattle were 15,444 mg/${\ell}$, 53,159 mg/${\ell}$, and 40,528 mg/${\ell}$ in feces and 8,454 mg/${\ell}$1,116 mg/${\ell}$, and 962 mg/${\ell}$in urine, respectively. And The daily loading amount of $BOD_5$, $COD_{Mn}$, SS in dairy cattle manure were 523 g, 1,416 g and 1,025 g, respectively. N, P and K contents of manure produced by dairy cattle were 0.33, 0.49 and 0.20% in feces, and 1.02, 0.27 and 1.03 in urine, respectively. In the concentrations of mineral and heavy metal of manure, Ca, Na and Mg contents were 1.56, 0.24 and 0.69%, and Zn, Cu, Cr, Pb and As were 69.23, 19.14, 2.89, 7.73 and 2.94 ppm, respectively. In conclusion, Dairy farms can be estimated optimum nutrient and pollutant balance to effectively manage the manure produced.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.103-108
• /
• 2010

To obtain the best yield of the beneficial ingredients in green tea, such as catechins, green tea powder is most often prepared by ethyl alcohol extraction. However, the taste, cost and composition of ethyl alcohol extract is different from aqueous spray-dried green tea extract (aq-GTE). Specifically, aq-GTE has a better flavor, lower production costs and higher purity when compared to ethyl alcohol extract. In this study, we elucidated the effect of aq-GTE on diet-induced obesity in male C57BL/6J mice following dose-dependent oral administration of aq-GTE. After eight weeks, the body weight was reduced by 13-17% in mice fed 200 mg/kg bw aq-GTE ($12.468{\pm}0.45\;g$; p<0.05) and 20-25% in mice fed 400 mg/kg bw aq-GTE ($11.259{\pm}0.61\;g$; p<0.05) when compared with the high-fat diet (HFD) control group mice ($14.714{\pm}0.95\;g$; p<0.05). The correlation between epididymal fat accumulation and body weight also decreased by approximately 26.6% (p<0.05) in mice fed a HFD with aq-GTE 400 mg/kg bw. Finally, serum parameters such as the triglyceride, glucose and cholesterol levels in the HFD groups were reduced by the aq-GTE 400 mg/kg bw diet. Analysis on glutamic-pyruvic transaminase, blood urea nitrogen and development of hepatic steatosis revealed no histologic evidence of hepatotoxicity in HFD mice fed aq-GTE. Overall, our results imply that aq-GTE is able to regulate body weight and fat accumulation in mice.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.1-8
• /
• 2014

Structures requiring chemical resistance are usually coated with surface protecting agents, but the cost for maintenance and re-construction is incurred due to the low durability. Therefore, in this study, sulfur was polymerized and the performance was examined so that it could be used as the concrete surface protecting agents for structures requiring chemical resistance. The evaluation results indicated that for the spray of the sulfur polymer surface coating agents, the application of the gravity type was appropriate; and for the number of coating times, about 3 cycle spray gave the best results. For the surface condition of the concrete to be coated with the surface protecting agents, outstanding quality was obtained above room temperature ($20{\sim}30^{\circ}C$), and the bond strength increased as the temperature increased. The evaluation results of the strength characteristics depending on the filler content of the surface protecting agents indicated that about 20~40% filler mixing contributed to the strength improvement as it reduced the shrinkage of the sulfur polymer. Also, the mixing of silica showed larger increase in the bond strength than the mixing of fly ash, and the most outstanding bond strength characteristics could be obtained by the mixing of both silica and fly ash. In the case of the chemical resistance, the strength reduction was minimized and outstanding chemical resistance was obtained when the fly ash and silica were substituted by 20%, respectively. The performance evaluation of the chloride ion penetration indicated that for the specimens coated with the sulfur polymer surface protecting agents, the chloride ion penetration resistance increased by 29~48% compared to the specimen without the coating of the surface protecting agent. The examination of the coating condition of the surface protecting agents, compressive strength, bond strength, chemical resistance, and salt damage resistance indicated that in the range of this study, the optimal level was when the silica and fly ash were substituted by 20%, respectively, as the filler for the sulfur polymer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.214-219
• /
• 1991

To clarify the relationship between ambient water temperature and heading characteristics of rice (Oryza sativa L.), twelve of varieties rice were grown in a cold tolerance screening field where water temperature was controlled by continuous cold water irrigation system to test the cold tolerance of rice. When cold water was continuously irrigated with 5 cm of water depth, the water had stagnated for about three hours, and the water temperature increased gradually from inlet toward outlet in the experimental plot. The fluctuation of water temperature was well synchronized with that of ambient air temperature, and the water temperature near outlet became higher than the air temperature at the vegetative phase, while became lower at the reproductive phase of rice plant community. The leaf development rates on main culm increased by increased water temperature. The rice varities, Fukuhikari, Sangpungbyeo and YR3486-16-2 were more sensitive than the others in the response of leaf development to water temperature. However, Janack and Milyang 42 were comparatively less sensitive to water temperature in leaf development. Janack and Paro -white rices required longer days to develop one leaf on main culm at reproductive phase than at vegetative phase. Varietal difference in days required to develop one leaf on main culm of rice plant was more distinctive at the reproductive phase when water temperature was relatively lower than at the vegetative phase with relatively higher water temperature condition. No difference was found between the growth phases, vegetative and reproductive, in the response of average leaf developmental rates to water temperature under the similar air temperature condition. The estimated average days required to develop one leaf on main culm decreased by 1.3 day by 1$^{\circ}C$ increase in water temperature. Varietal differences in the total number of leaves on main culm depended upon the water temperature, in which the varieties such as Fukuhikari, Gwangmyeon-gbyeo, China 988, and YR3486-16-2 showed increased one leaf by increased water temperature, while Sobaekbyeo, Paro-white, Sangpungbyeo, Pungsanbyeo, Samgangbyeo, and Milyang 42 were kept at the same leaf number regardless of water temperature. However, the total leaf number on main culm and days to heading of Janack increased by increased water temperature. The other varieties showed the shortened days to heading by the increase in water temperature with noticeable varietal differences regardless of the variation in the total number of leaves on main culm.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1976

This paper is the third one of the study on balanced type oscillating mole-drainer, the first one was presented in No 9. Gyeongsang College Report and the second one in Vol. 17, No.4 of the KSAE. In the first part of this study, the characteristics of traction forces between the nonoscillating earth working equipments and oscillating ones was compared. A model of the balanced type oscillating mole-drainer, which composed of a mechanism that may reduce the machine vibration, was designed following the dimensional analysis and similitude technique. The model test was carried out to clarify the balancing mechanism of the oscillating parts and other parts of the machine. In the light of the results from the model tests, a prototype machine was made for experimental purpose. Results from the field test by a reported in the near future. In the second report, the model tests were carried out under the same soil conditions, i.e, . oscillating frequency, running velocity, and oscillating amplitude, etc. It was clear that use of balanced type oscillating model could substantially reduce the vibration of the whole system of the machine, when compared with the nonoscillating type model. In this paper(the third report), results of investigation on the traction force, power requirement, and moment. etc, is presented. Analysis of variance technique was used for analyzing the effect of the frequency, amplitude, and running velocity on the draft force, torque, power requirements, and moments. The results obtained from the model tests are as follows, 1) By practicing a balanced-type oscillating mole-drainer, it was possible to reduce the traction resistance by 55.1-61. 2 percent of traction resistance, however, was 1.75 - 1.95 times greater than the value of resistance which was induced by use of a mole-drainer with single bullet. The resistance of rear shank against soil was considered as a main causing factor of the above results. 2) As the oscillation frequency was increased, the traction resistance was decreased. Considering on the effect of oscillation the greater the amplitude, and the slower the running velocity was, the greater the reduction ratio of traction resistance was. 3) The ratio of the traction resistance of oscillating mole-drainer to that of non-oscillating one could be represented as a function of dimensionless variable (V/$Af$). The results from the tests were well agreed with the reported results from the experim ents on oscillation plow or hoe. 4) By taking a lower value of (V/$Af$), reducing the traction resistance was possible. This fact meant, however, that the efficiency of mole drain practice would be lower. 5) It was experimentally confirmed under the same condition of soil that the variable (R/$rD1^3$) could be represented as a function of a variable($V^2/gD$) when a non\ulcornerocillating mole-drainer was used. 6) When a oscillating mole-drainer was used, the variable(R/$rD_1^{3}$) could be represented as a function of two variables ($v^2/gD_1$) and (V^2/gD_1$). 7) The torque was not affected by a change of frequency. However, a relation of proportionality existed between torque and amplitude, running velocity, and ratio of bullet diameter. When a balanced type oscillating mole-drainer with two bullets was used, torque was increased by 52.8-78. 4 percent and total power requirement was also increased. 8) Total power requirement was increased linearly in accordance with the increasing frequency, 41.96 percent of total power was used for oscillating action. The magnitude of total power requirement was 1. 8-9. 4 times greater than that of a non-oscillating mechanism. In the view point of power requirement, it was not advisable to increase the frequency, amplitude, running velocity, and ratio of bullet diameter at the same time. 9) Only the positive moment occured in the rear shank. Change of the diameter of a rear bullet, could not affect the balancing against the soil resistance. It was necessary for rear bullet to have a large resistance against soil only when the rear bullet was in backward motion. 10) Within an extent of the experimental base, optimum limits for several design factors were A=0.5cm, $f$=22.5Hz, V=O. 05m/sec, and $\lambda$=1.0 By adapting these values traction resistance was reduced by 40 percent and vibration acceleration wa s reduced by 60 percent. Even though the total , power requirements for operating a balanced type oscillation mechanism was greater ~than that of non-oscillating one, using a oscillating mechanism would be more effective. Because a balanced type oscillating mechanism is used, tractive resistance will be reduced and then the lighter . tractive equipment could be used.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.177-182
• /
• 2006

This study was conducted to investigate the effects of melengesterol acetate (MGA) and $PGF_{2{\alpha}}$ administrations on serum progesterone level, synchrony of estrus and conception rates in Han-woo. Firstly, ten heifers and one freematin were fed 0.5 mg MGA/day for 14 days in a grain carrier, and after 19 days of MGA feeding, a single injection of 25 mg $PGF_{2{\alpha}}$ were treated. Blood samples were collected to evaluate serum progesterone concentrations from the start of feeding of MGA until the end of feeding and subsequent estrous detection and artificial insemination (AI) at 3 days intervals, and on days of $PGF_{2{\alpha}}$ injection, estrous detection, AI, and 15th and 60th days after AI. The level of progesterone in the blood began to increase from 7 days after MGA feeding, and 9 days after feeding it became 5.4 ng/ml and maintained that level thereafter. On the 33th day when the $PGF_{2{\alpha}}$ was injected, it reached the peak level of 7.6 ng/ml. However, 2-3 days after $PGF_{2{\alpha}}$ injection, it dropped to 1.4 ng/ml drastically (p<0.05). Secondly, one hundred and ninety four Hanwoo heifers or cows were divided into two groups to compare estrous induction and conception rates: the one treated with MGA and $PGF_{2{\alpha}}$, (n=104) and the other with $PGF_{2{\alpha}}$ treatment (two injections at 11 days interval, n=90). The heifers or cows treated with MGA and $PGF_{2{\alpha}}$ were identical to those used as above. The percentages of heifers or cows showed estrus were higher in the $MGA+PGF_{2{\alpha}}$ treatment (91.3%) than in the $PGF_{2{\alpha}}$ treatment (72.2%, p<0.05). Conception rates were also higher in the $MGA+PGF_{2{\alpha}}$ treatment (94.2%) than in the $PGF_{2{\alpha}}$ treatment (88.9%, p<0.05). The results of this experiment indicate that estrus synchronization using $MGA+PGF_{2{\alpha}}$ is more effective than that using $PGF_{2{\alpha}}$ (two injections) in Hanwoo.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.231-236
• /
• 2004

In order to identify the growth characteristics, the yield and chemical composition of Jeju native sorghum(Sorghum bicolor L.) based on seeding date in Jeju region. Seeding carried out the 10-day intervals from March 27 to May 27 in 2000, respectively. Plant height was 222.9 cm, Showing the highest on seeding date, April 7 among that of any other seeding date. On the other hand, those of early and late seeding gradually decreased. The results of stem diameter, number of leaves were similar to those of the plant height. The yield of fresh, dry matter forage, crude protein and TDN found the highest on April 7 seeding, 48.0 MT/ha, 12.0 MT/ha, 1.0 MT/ha, 5.3 MT/ha, respectively. In early and late seeding, the yield was gradually decreased. According to delaying the seeding date, March 27 to May 27, the contents of crude protein (from 7.8 to $11.4\%$) ether extract(from 1.7 to $3.3\%$), nitrogen free extract(from 34.1 to $40.0\%$) and TDN(from 42.9 to $52.5\%$) were gradually increased, respectively. On the other hand, those of crude fiber (from 40.6 to $32.3\%$) and crude ash (from 10.3 to $7.6\%$) were decreased. These results showed that April 7 was the optimum seeding date with the sole object of feed production of Jeju native sorghum.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.2
• /
• pp.99-106
• /
• 2008

This experiment was carried out to show a reform measures by grouping for problems by the survey of TMR plants. Twenty total mixed ration (TMR) plants (10 cooperation and 10 private plants) were surveyed, of which 13 plants, 65% of total TMR plants, committed TMR formulae to a outside nutrition specialist (TMR formulator). With respect to consulting fee for TMR formulae, $500{\sim}900$ thousands Won was paid monthly. On the basis of dry matter 1kg, the prices of TMR products were $325.6{\sim}347.0$Won, whereas those of wet TMR products $365.7{\sim}375.0$Won, which was appeared to be factors to increase management cost. And also, because the TMR plants did not provide TDN (total digestible nutrient) value on their products, nutritional balance feeding for cows could not be managed in farms. It was calculated, based on ADF (acid detergent fiber) value, that TDN value in dry type TMR was 63.0% and 73.2% fur private and cooperation TMR plants, respectively and that the corresponding figure in wet type TMR was 64.9% and 67.2%. According to TMR plant employee's opinion, a prier items to enlarge TMR utilization were TMR education, TMR advertisement, and improvement of ability to make TMR formula. Therefore, for the purpose of further development of TMR, special education of persons related to TMR should be supported.

• Journal of Animal Environmental Science
• /
• v.13 no.1
• /
• pp.21-28
• /
• 2007

This experiment was conducted to determine the effect of feed intake and water consumption on milk yield and manure production in milking cows. The average feed intake(dry matter) of milking cows were 19.5kg/hd/d. Spring(23.9kg) and fall(22.1kg) feed intake rates when higher than in the summer(17.0kg) and winter(15.3kg/hd/d). The average water consumption of milking cows were $77.2\ell/hd/d$. Summer showed the highest value$(85.5\ell/hd/d)$ and winter showed the lowest value$(62.2\ell/hd/d)$. The average milk yield during spring, summer, fall, and winter was 30.8, 24.0, 25.4, and 23.7kg/hd/d, respectively. Milk yield during spring was found to be statiscally greater than for the other seasons. Manure production of milking cows during spring, summer, fall, and winter was 64.4, 63.5, 60.4, and 51.0kg/hd/d, respectively. Consequently, a relatively high correlation between milk yield and water consumption$(R^2=0.7742)$, milk yield and feed intake$(R^2=0.7459)$, water, consumption and urine production$(R^2=0.7422)$, feed intake and feces production$(R^2=0.6044)$, and milk yield and feces production$(R^2=0.6920)$ were observed in milking cows. The other hand, correlation between water consumption and feces production$(R^2=0.2950)$, feed intake and urine production $(R^2=0.1985)$, and milk yield and urine production$(R^2=0.2335)$ were found to be relatively low. Therefore, correlation equation between milk yield and feed intake, milk yield and water consumption can be estimated from : $Y=0.1919X_1+11.181(R^2=0.7742),\;Y=0.8568X_2+9.3067(R^2=0.7459)$(Y=milk yield $X_1=water$ consumption, $X_2=feed$ intake).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.2
• /
• pp.115-124
• /
• 1977

From August 1976 to May 1977, a series of rearing experiments of eels weighing over 5 grams were carried out utilizing indoor recirculating aquariums and the results are summarized as following: 1. The eels were instantly acclimatized in the aquarium when alive Tubifex was fed as food, resulting in the food coefficient of around 5, and the daily growth rate of $2\%$ or so (Table 2). 2. When mackerel flesh was used in combination with flour dough or commercial powdered feed, the food coefficients were 4 to 5 and daily growth rates were between 1 and $2\%$ (Tables 3 and 4). 3. The eels of 12.4-14.7g in average weight which had not shown any growth when fed processed feed, grew normally when they were fed alternately with alive Tubifex and processed feed with the results of 4.3-6.0 in food coefficient and $1.4-2.3\%$ in daily growth rate (Table 5). 4. Experimental processed feed containing North Pacific which fish meal as the main ingredient showed the food coefficient of 1.31-1. 83 as dry material and this means that there is not any significant difference between this experimental feed and the control commercial eel feed, imported front Japan which showed food coefficient of 1.34 and 1.328 (Tables 6 and 7). 5. The feed cost may be reduced by about $45\%$ (based on tile domestic prices in the spring 1977) if this experimental processed feed is used instead of imported commercial feed. 6. Uneven growth is markedly significant in eels, and those which showed retarded growth gave very poor food efficiency as well as poor growth rate until they reach the size of about 30 grams. Thereafter they recovered both the normal food coefficient and growth rate. 7. Individuals which have been showing significant retarded growth may have some inherent physiological factors but this poor growth might also be, more or less, results of some external factors which are considered necessary to be investigated.