• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.33-38
• /
• 2015

Loads applied on the floor are transferred through beams to columns. The beams can be designed as both end fixed or simple beams. The load bearing capacity of a beam depends on each boundary condition. However, when the load bearing capacity of a beam is evaluated in fire tests, all kinds of beams are tested using simple beam conditions. In this study, an analytical method performed using heat transfer theory and heat stress analysis based on the mechanical and thermal properties of SS-400 steel at high temperature. This method was used to clarify the differences between the two types of boundary conditions at normal and high temperature. The results show that the load bearing capacity of a both-end fixed beam at high temperature is superior to that of a simple beam. Therefore, the application of simple beam conditions in fire tests for evaluation of load bearing capacity is conservatively safe compared to fixed boundary conditions.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.205-212
• /
• 1987

To examine the morphogenetic response, stem segments of 8 Populus spp. and 3 different explants of P. nigra var. italica were cultured on MS (Murashige and Skoog 1962) and WPM (Woody Plant Medium) medium containing various phytohormones. The results obtained were as follows: 1. Shoot regeneration and development from stem segment of 8 Populus spp. showed a quite difference according to the section and the species. All of the species of Leuce and Tacamahaca section did not form adventitious buds, while most of explants showed axillary or dormant bud elongation after 4 weeks. But P. nigra var. italica of Aigeiros section showed a successful adventitious bud formation (mean 5.4 buds per explant). 2. Leaf, petiole, and internode segment of P. nigra var. italica showed a quite differences according to media and ex plants upon the morphogenetic response. Adventitious bud formation from leaf was more abundant and readily initiated on the abaxial side than on the adaxial side. Mean number of 103 adventitious buds per explant was obtained from abaxial side of leaf segment cultured on WPM medium containing $0.2mg/{\ell}$ BAP for 5 weeks. 3. 2,4-D (2,4-dichlorophenoxy acetic acid) supplemented to media appeared to be negative upon the adventitious bud formation of P. nigra var. italica, while it promoted callus formation from all explants. Especially, NAA (${\alpha}$-naphtalene acetic acid) or NAA combination with BAP (6-benzylaminopurine) promoted root regeneration from the all explant of P. nigra var. italica in this study.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.405-412
• /
• 2016

Illegally adulterated compounds, such as impotency drugs and their synthetic analogues, which have been purported to enhance sexual potency or mood, have been constantly detected in foods including dietary supplements. The adulterated foods with these illegal compounds may threaten public health because their safety and efficacy have not been verified. This study was aimed at investigating illegal compounds in foods and counterfeit products. 54 illegal compounds were assayed using a simultaneous analytical method involving liquid chromatography equipped with photo diode array (LC-PDA) and LC coupled with tandem mass spectrometry (LC-MS/MS). The method was validated in terms of selectivity, linearity, limit of detection (LOD), limit of quantification (LOQ), precision and accuracy. In 48 of 161 samples, we identified 7 different illegal compounds, including sildenafil, tadalafil, chlropretadalafil, demethylsildenafil, dimethyl-thiosildenafil, icariin and yohimbine. When purchasing products marketed for erectile dysfunction or aphrodisiacs, ulmost care should be taken owing to the possible presence of these illegal compounds.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.424-429
• /
• 2016

Globally, obesity has been recognized as a serious health problem. Recently, slimming foods for weight loss and maintenance were found to contain anti-obesity drugs, their analogues, and prohibited ingredients. To avoid inspections by the Government, structurally modified analogs have been continuously synthesized. For rapid determination of adulterated slimming products, we simultaneously analyzed 21 illegal compounds using liquid chromatography (LC) equipped with photo diode array, and LC coupled with tandem mass spectrometry. The validation of the method was performed with regard to selectivity, linearity, limit of detection, limit of quantification, precision, and accuracy. We purchased 128 samples from the Korean market and online sources in the year 2015. In 31 samples, 3 illegal compounds were detected as follows: 9.9-135.3 mg/g of sibutramine, 0.2-17.5 mg/g of yohimbine, and 1.8 mg/g of icariin. This simultaneous detection method might prove to be a simple and rapid analysis for monitoring illegal compounds in slimming foods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.753-762
• /
• 2013

This paper forecast that, if the EMC test market for broadcasting and communication materials and equipment reaches a saturated state, such will give rise to adverse effects such as capture phenomenon, rent seeking phenomenon, and stiff test price competition; this in turn will eventually wield a negative impact on our society. Thus, to determine the saturation level of EMC test markets, the size of test markets and test capabilities of the designated laboratories were surveyed. As a result, the operation rate of equipment in the EMC test markets was revealed to be 78 %, suggesting market saturation. Moreover, the wireless, wire, and SAR equipment operation rates reached 65 %, 3 %, and 10 %, respectively, suggesting market saturation. Thus, maintaining the strictness of testing requires limiting the designation of new test laboratories; in light of practices and implementation of laws, however, the relevant administrative agency has difficulty rejecting applications for the designation of laboratories.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.301-310
• /
• 2002

Internet has been applied to the educational field such as data search, lecture by motion picture, realtime examination. Most questions made for these remote examinations use methods of making questions randomly using fixed questions or item pools. The designed system in this paper makes questions without knowing MARK-UP language and after undergoing examinations on Web. Also it readjusts degree of difficulty automatically on the basis of the rate of correct answers. In addition, this enables learners to perform feedback learning after examinations and subsequently learners themselves to adjust their degree of difficulty and undergo reexaminations. The automatic selection system makes it easy to select questions, possible to expect average marks and number of questions made, and to prevent that questions may be made too easy or too hard. For a remote examination, as there are much possibilities of dishonesty such as examination by proxy so different types of problems are made, and problems of the rationality caused from that can be avoided.

• Journal of Korea Multimedia Society
• /
• v.11 no.8
• /
• pp.1129-1137
• /
• 2008

E-learning as a new education trend is being applied not only to cyber school but also various education fields such as employee training for companies or interactive learning for consumers. Users of the E-learning can take online tests individually anywhere, to evaluate their achievement level. Because users who are taking the online tests may show their own IDs or passwords to others, the possibility of cheating is very high. Therefore, it is very important to authenticate the users. In this paper, we propose an adaptive-keyboard authentication method which depends on user behavior patterns through the use of IDs and passwords. This method does not need any additional devices or special effort. An adaptive method to update patterns in which IDs and passwords are entered was previously suggested and this new method has proved to be better than previous methods through simulations and implementation.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.6
• /
• pp.351-355
• /
• 1997

Adventitious shoots were induced from cambial tissue cultures of 3-year-old seedlings using BLG mineral salts medium supplemented with 10 mM glutamine and 30 mM sucrose. The optimum growth regulator level for bud induction was 4,5 $\mu$M BA which produced average 25.5 shoots per cambium segment. Induced buds were elongated on GD medium supplemented with 30 mM sucrose followed by LMG medium supplemented with 30 mM sucrose for further shoot elongation. Elongated shoots were rooted on half-strength GD medium containing $0.54 ;\mu\textrm{M}$ NAA with the frequency of 20%. This system proved the high morphogenic potential of cambial tissue in larch.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.311-317
• /
• 1981

As the low labor-productivity is being floated up to be the most limiting factor in barley cropping, the endeavor of many researchers concerned have been concentrated on recovering from that. For this reason, in this experiment 8 kinds of sowing methods were employed to survey the yield productivity and the labor-requirement of each methods. And with promising the possibility of consistent mechanization, both prediction of the assurable requirement of labor investment and calculation of the labor productivity in each method were estimated so that the possibility of labor-saving in barley cultivation investigated. Also sowing methods for labor-saving cultivation were presented according to the labor-structure of farm as divided with the phases.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.857-863
• /
• 2012

In this study, tailor-welded blanks(TWB) were formed between high-strength steel(SABC1470) and cold rolled steels(SPFH590 and SPFC980) to improve passenger safety and reduce the weight of cars. Multi-material TWB specimens were highly strengthened through the heat treatment of SABC1470. The change in tensile strength caused by the stand-by time until water cooling after stamping and the deformation behavior of high-speed bending in a statically indeterminate condition such as in the center-pillar were evaluated. Multi-material TWB specimens that were heat-treated at the same temperature tended to show a decrease in tensile and yield strength, depending on the stand-by time until water cooling. On the other hand, Multi-material TWB specimens(SABC1470+SPFH590) that were heat treated at $850^{\circ}C$ showed good properties that were suitable for ensuring passenger safety in car accidents. From the viewpoint of passenger safety, it is best to use SABC1470 and SPFH590 in the upper and lower area of the center-pillar, respectively.