• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.1
• /
• pp.67-78
• /
• 2012

The purpose of this study was to determine whether there were differences in shear bond strength to human dentin using IDS technique compared with DDS. Forty freshly extracted human molars were and devided into 4 groups. The control group specimens were, on the morrow of tooth preparation, light-cured after application of dentin bonding agent and cemented with resin cement. The IDS/SE(immediate dentin sealing, Clearfil$^{TM}$ SE Bond) and IDS/SB (immediate dentin sealing, Adapter$^{TM}$ Single Bond 2) specimens were, on the morrow of tooth preparation, light-cured after application of dentin bonding agent(Clearfil$^{TM}$ SE Bond and Adapter$^{TM}$ Sing Bond 2, respectively), whereas DDS specimens were not treated with any dentin bonding agent. IDS/SE, IDS/SB and DDS specimens were thermocycled. Following that delay, specimens were cemented with resin cement. The dentin bonding agent was left unpolymerized until the application of porcelain restoration. Shear bond strengths were measured using a universal testing machine. Specimens also were evaluated for mode of fracture using an optical microscope. The mean shear bond strengths of control group and IDS/SE groups were not statistically different from one another. The bond strength of IDS/SE group had a significantly higher mean than that of DDS group. There was no significant difference in the mean shear bond strength between IDS/SB(4.11MPa) and DDS group. The evaluation of failure modes indicates that most failures in the control group and IDS/SE groups were mixed, whereas failures in the DDS group were interfacial. When preparing teeth for indirect ceramic restoration, IDS with Clearfil$^{TM}$ SE Bond results in improved shear bond strength compared with DDS.

• Korean Journal of Veterinary Research
• /
• v.40 no.2
• /
• pp.361-371
• /
• 2000

It has been recently reported that 2-bromopropane (2-BP) induces male reproductive toxicity in both human and experimental animals. However, delayed effects of 2-BP on male reproductive system have not been investigated in detail. The present study was conducted to investigate the testicular toxicity of 2-BP and to determine the recovery of normal spermatogenesis in Sprague-Dawley rats. Male rats aged 5 weeks were administered 1,000mg/kg 2-BP by gavage daily for 4 weeks and sacrificed sequentially at 1, 2, 3, 4 and 12 weeks after initiation of 2-BP treatment. Testicular toxicity was evaluated qualitatively by histopathological examinations and quantitatively by reproductive organ weights, spermatid head count, and repopulation index. In the 2-BP treated rats, the body weights was significantly suppressed and the weights of testes and epididymides were also decreased in a time-dependent manner. On histopathological examination, spermatogonia in stages I-VI and preleptotene and leptotene spermatocytes in stages VII-IX were strongly depleted at 1 week of dosing. Spermatogonia were depleted extensively in all spermatogenic stages at 2 weeks. Continuing with the evolution of spermatogenic cycle, zygotene spermatocytes, pachytene spermatocytes, and round spermatids were sequentially depleted at 2, 3, and 4 weeks of dosing due to the depletion of their precursor cells. Vacuolization of Sertoli cells and spermatid retention were also observed at all time points, suggesting that 2-BP induced Sertoli cell dysfunction. At 12 weeks, after 8 weeks recovery, most of the tubules appeared severely atrophic and were lined by Sertoli cells only. Leydig cell hyperplasia in the interstitial tissue was also found. In addition, dramatic reductions in the number of spermatid heads and repopulation index were observed, indicating that 2-BP-induced testicular injury is irreversible. These results indicate that 4 weeks repeated-dose of 1,000mg/kg 2-BP results in a progressive germ cell loss due to the depletion of spermatogonia followed by long-term testicular atrophy in SD rats.

• The Korean Journal of Pharmacology
• /
• v.11 no.1 s.17
• /
• pp.33-38
• /
• 1975

The clinical efficacy of Ethaverine, a peripheral vasodilator, was studied according to a double-blind, non-cross over method in 29 diabetic patients with peripheral arterial diseases. The clinical improvement was assessed from the history of patients including the incidence and frequency of intermitten claudication. Ethaverine, after 4 weeks of therapy, was not effective in improving clinical symptoms compared to placebo. Ethaverine, however, was an efective vasodilator than placebo. The quality of vasodilation induced by Ethaverine, was similar to that of alcohol. A new clinical method of studying peripheral vasodilator was presented. The clinical symptoms of peripheral vascular arterial disease in the lower extrimities include reduced intensity of palpable pulses, coldness, and discoloration of the skin. Intermittent claudication may be present. Pathologic changes in vessel architecture precede the symptoms, and recognition of impending vascular insufficiency is a determining factor in selecting vasodilating therapy or surgical management. Also, post-operative patients who have chronic peripheral vascular arterial disease may be candidates for subsequent vasodilating therapy. Peripheral vasodilators, according to the series of reports, may be indicated in vasospastic peripheral vascular condition rather than an occlusive vascular disease and the vessel responds best when a relatively large vascular beds are involved rather than a small, capillary beds. Recently, the clinical efficacy of peripheral vasodilators have been challanged by many clinical investigators and clinicians. In this study, we have re-evaluated the efficacy of Ethaverine HCl as peripheral vasodilator in patients with vasospastic peripheral arterial disease. Ethaverine is claimed to be two to four times as potent a spasmolytic agent as papaverine in a variety of laboratory and clinical work.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1164-1168
• /
• 2005

Korean traditional deer decoction (Nogjungtang), composed of oriental herbs and almost deer parts, has been used as an important resource for human health. For basic studying on Nogjungtang, this experiment was conducted to evaluate nutritional effects of Nogjungtang, and estimate its effect on growth, food efficiency, organ development and hematological indices in growing and adult Sprague-Dawley rats. The rats were divided into three groups as follows; control: non-supplementation, Notiungtang I: recommended dose, and Nogjungtang II: thrice recommended dose. Nogjungtang was composed of various general nutrients with up 93$\%$ moisture.Crude protein is the highest value as 22.78$ \%$, Mg is a major mineral as 0.48$\%$ compared to other minerals, and methionine and proline are higher by 1.31 and 1.67$\%$ than other amino acids based on dry matter, re-spectively. In both growing and adult rats, there were no significant difference in body weight gain and feed intake between the control and Nogjungtang groups. Also, organs weights (liver, heart, kidney and stomach) and hematological indices (WBC, RBC, Hb, Hct and Platelet) did not show statistically significant differences among the experimental groups. However, all of experimental rats were normal growth without hypertrophy or negative development of organs by Nogjungtang. Hematological indices maintained in normal value by thrice recommended dose of Nogjungtang. The average body weight of each treatment groups showed similar levels at end of experiment. In case of the feed efficiency ratio (feed intake/body gain), the growing rats showed 6.00, 5.81 and 5.99 and adult rats showed 9.03, 8.98 and 9.10 in control, Nogjungtang I and Nogjungtang II, respectively. In conclusion, although further investigation of Nogjungtang should be performed in the functions registered in many ancient literatures, Nogjungtang is physiologically safe and may have potential as candidate food for human health.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.808-815
• /
• 2007

Four different herbs, including rosemary, oregano, basil and sage, along with green tea were individually added to ground beef at different percentages: 0.5, 1.0, and 1.5, respectively. The sensory qualities of the five natural herbs and their antioxidant effects were evaluated using Beef-Yukwonjeon. For the sensory evaluation results, the 0.5% herb addition and the control group generally showed higher acceptability scores than the 1.0% or 1.5% herb addition groups. In particular, the Yukwonjeon made with 0.5% green tea showed higher preferences in the acceptance tests and ranking tests. However, the sensory differences among samples were reduced after 3 days of storage at $6^{\circ}C$. For the results of lipid oxidation without storage, the TBARS values of the herb addition groups were slightly lower than the value of the control group, but not significantly(p>0.05). However, the antioxidant effects of each herb showed higher values over a longer storage period as well as at the higher herb concentrations. The antioxidant effects of the herbs during 7 days' of storage at $6^{\circ}C$ were evaluated as $10.0{\sim}38.5%$ reductions in TBARS values as compared to the group without herbs. Furthermore, the antioxidant effects of the herbs during 30 days' of storage at $-20^{\circ}C$ were shown as $16.8{\sim}27.8%$ reductions in the TBARS value. The green tea showed the highest antioxidant activity against lipid oxidation, because it was acceptable at higher concentrations in the sensory evaluation. These results indicate the potential to produce better quality beef-Yukwonjeon, with herbs, especially green tea.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.110-119
• /
• 2020

This study investigates the improvement in the performance of a temperature and humidity measuring system developed by Company A using the Aspirated Radiation Shield (ARS). The shield has been used in the industry and its accuracy was verified recently. The study also experimentally examines the impact of the wind speed of the ARS device on temperature and humidity. The results are summarized as follows. Before the improvement of the system, the temperature of Company A's system was up to 10.2℃ higher than that measured by the ARS device, and the measured relative humidity was approximately 20.0% lower. After improving the system, the temperature and relative humidity of nodes 1 and 2 were found to be almost identical. The temperature deviations including the maximum, mean, and minimum temperatures between those measured in node 2 and by ARS were approximately 0.2 to 0.7℃, respectively; further, the values measured by ARS tended to be slightly lower or higher. In terms of relative humidity, the ARS measurements yielded values approximately 10.0% higher immediately after sunset; otherwise, the values were approximately 1.9% lower. Moreover, when node 1 was set to minimum-middle, middle-maximum, and maximum, the deviations including the maximum, mean, and minimum temperatures of nodes 1 and 2 were 0.1 to 0.4℃, 0.0 to 0.2℃, and 0.0 to 0.5℃, respectively. The deviations including the maximum, average, and minimum temperatures of the three points of node 1 and the ARS ranged from 0.2 to 0.5℃, 0.1 to 2.2℃, and 0.1 to 1.1℃, respectively, indicating that the temperature deviation according to the wind speed was negligible. In addition, considering the results of the previous study with those from this study, the optimal wind speed to improve the temperature deviation is considered to be in the range of 1.0~2.0 m·s^-1.

• Progress in Medical Physics
• /
• v.23 no.2
• /
• pp.114-122
• /
• 2012

For the determination of absorbed dose to water from a linear accelerator photon beams, it needs a exposure calibration factor $N_x$ or air kerma calibration factor $N_k$ of air ionization chamber. We used the exposure calibration factor $N_x$ to find the absorbed dose calibration factors of water in a reference source through the TG-21 and TRS-277 protocol. TG-21 used for determine the absorbed dose in accuracy, but it required complex calculations including the chamber dependent factors. The authors obtained the absorbed dose calibration factor $N_{dw}{^{Co-60}}$ for reduce the complex calculations with unknown $N_{dw}$ only with $N_x$ or $N_k$ calibration factor in a TM31010 (S/N 1055, 1057) ionization chambers. The results showed the uncertainty of calculated $N_{dw}$ of IC-15 which was known the $N_x$ and $N_{dw}$ is within -0.6% in TG-21, but 1.0% in TRS-277. and TM31010 was compared the $N_{dw}$ of SSDL to that of PSDL as shown the 0.4%, -2.8% uncertainty, respectively. The authors experimented with good agreement the calculated $N_{dw}$ is reliable for cross check the discrepancy of the calibration factor with unknown that of TM31010 and IC-15 chamber.

• Geophysics and Geophysical Exploration
• /
• v.6 no.3
• /
• pp.126-133
• /
• 2003

High-resolution shallow marine seismic surveys have been carried out for the resources exploration, engineering applications and Quaternary mapping. To improve the resolution of subsurface structure image, multichannel digital technique has been applied. The quality of the image depends on the vertical and horizontal resolution and signal to noise (S/N) ratio which are associated with the data acquisition parameters such as sample interval, common midpoint (CMP) interval and CMP fold. To understand the effect of the acquisition parameters, a test survey was carried out off Yeosu and the acquired data were analyzed. A 30 $in^3$ small air gun was used as a seismic source and 8 channel streamer cable with a 5 m group interval was used as a receiver. The data were digitally recorded with a shot interval of 2 s and sample interval of 0.1 ms. The acquired data were resampled with various sample intervals, CMP intervals and CMP folds. The resampled data were processed, plotted as seismic sections and compared each other. The analysis results show that thin bed structure with ${\~}1m$ thickness and ${\~}6^{\circ}$ slope can be imaged with good resolution and continuity and low noise using the acquisition parameters with a sample interval shorter than 0.2 ms, CMP interval shorter than 2.5 m and CMP fold more than 4. Because seismic resolution is associated with the acquisition parameters, the quality of the subsurface structure can be imaged successfully using suitable and optimum acquisition parameters.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.127-136
• /
• 2008

To identify the potential area of gas hydrate in the Ulleung Basin, 2-D and 3-D seismic surveys using R/V Tamhae II were conducted in 2005 and 2006. Seismic survey equipment consisted of navigation system, recording system, streamer cable and air-gun source. For reliable velocity analysis in a deep sea area where water depths are mostly greater than 1,000 m and the target depth is up to about 500 msec interval below the seafloor, 3-km-long streamer and 1,035 $in^3$ tuned air-gun array were used. During the survey, a suite of quality control operations including source signature analysis, 2-D brute stack, RMS noise analysis and FK analysis were performed. The source signature was calculated to verify its conformity to quality specification and the gun dropout test was carried out to examine signature changes due to a single air gun's failure. From the online quality analysis, we could conclude that the overall data quality was very good even though some seismic data were affected by swell noise, parity error, spike noise and current rip noise. Especially, by checking the result of data quality enhancement using FK filtering and missing trace restoration technique for the 3-D seismic data inevitably contaminated with current rip noises, the acquired data were accepted and the field survey could be conducted continuously. Even in survey areas where the acquired data would be unsuitable for quality specification, the marine seismic survey efficiency could be improved by showing the possibility of noise suppression through onboard data processing.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.181-187
• /
• 2004

Preparations of mesoporous materials using various templates and their applicability have been intensively investigated for many years. We studied on synthesizing mesoporous Ti02 with pores in which sensitive compounds having weak physico-chemical properties such as thermal or UV irradiation and low solubility in solvent are trapped. Prior to trapping OMC in the pores of mesoporous titania, OMC was nano-emulsified in O/W system using Lecithin. Thereafter the OMC was trapped in the pores of mesoporous titania using sol-gel method. Main focus of this work is to prepare OMC-trapped mesoporous titania and to trace the stability and solubility of nano-emulsified OMC in the pores of mesoporous titania, and compared with that of mesoporous silica. OMC-trapped mesoporous Inorganic-Organic hybrid titania showed higher factors in sun protecting and a skin penetration phenomenon was reduced.