• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.229-232
• /
• 2003

본 연구는 울산지역 지하수오염 저감기술의 개발에 필요한 대수층의 공간적 분포특성을 파악하는 데 목적이 있다. 울산 공업도시의 대수층에서 공간적 분포특성을 파악하기 위하여 시추조사가 많이 필요 하지만 비용 및 시간 관계상 어려움이 있기 때문에, 지질조사 보고서나 논문 등에서 지하수자료와 시추 자료를 획득하여 지구통계기법을 이용한 울산지역 대수층의 공간적 분포를 모사하였다. 그리고 인구가 밀집되어 있는 남구와 중구를 중심으로 대수층 단면 분포를 모사하였다. 이와 같은 분석결과는 표토층 하부경계부와 풍화대 하부경계부에서 유사한 분포심도로 나타났으며, 지하수 수위는 표토층 하부경계와 암반층 상부경계부인 풍화대에 분포하는 것으로 나타났다.

• Spatial Information Research
• /
• v.8 no.2
• /
• pp.301-315
• /
• 2000

Every, year, a great amount of site investigation data is collected on site to obtain sufficient conditions. Investigation of subsurface conditions is prerequisite to the design and construction of structures and also provides information on ground properties such as geologic formation and types of soil. This data set, which portrays real representation of ground conditions over the existing geologic and soil maps, could be further utilized for analyzing the subsurface conditions. It is therefore necessary to develope a subsurface exploration analysis system which is able to extract the valuable information from the heterogeneous, non-normalized subsurface investigation data. This paper presents the overall design scheme and implementation on a subsurface exploration analysis system. The analysis system employs one of data set such as bore-hole data. The clustering technique employed in the developed system makes a large volume of bore-hole data into several groups in terms of ground formation and geographical vicinity. As a result of clustering, each group or cluster consists of bore-hole data with similar characteristics of subsurface and geographical vicinity. In addition, each clustered data is displayed on digital topographical map with different color so that the analysis of site investigation data could be performed in more sensible ways.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.242-246
• /
• 2016

해방70주년기념사업으로 일제강점기 동안에 조선인 강재징용으로 구축된 진진동굴에 대한 Geoinformatics 적용 학술조사를 통하여 구조물의 분포와 활용에 대한 내역을 규명하고, 일제에 의하여 자행된 국토훼손의 실상 및 만행을 출판 및 국내외 학술발표 자료로 할용 하고자 하였다. Geoinformatics 적용 조사탐사의 범위는 전국을 대상으로 하며, 서울지역, 인천지역, 대구지역, 부산지역, 제주지역, 대전지역 이외 도서지역 등 미 탐사지역에 대하여 지속가능한 수행을 추진함에 대한 문헌자료, 탐문조사, GIS분석, 지질광물분석 및 공동(空洞)조사 등으로 실시하며, 지표 및 지하조사의 방법은 위성영상분석(Remote Sensing), 물리탐사(전기/자력탐사) 및 동공 확인 시추(구경: 50mm)에 의한 도면작성으로 분포, 형상, 내용 등으로 다음과 같은 조사내용을 제기하였다. 일제동굴진지에 대한 geoinformatics기법의 접근에 의한 기반을 적용해 본 결과 문헌자료, 탐문조사, GIS분석, 지질광물분석 및 공동(空洞)조사 등으로 실시하며, 학술조사의 방법은 위성영상분석(Remote Sensing), 지구물리탐사(전기/자력탐사) 및 동공 확인 시추 등의 종합적인 정성적이며 정량적인 탐사에 의한 적용이 효과적인 결과를 초래할 수 있다는 결론에 도달하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.65-74
• /
• 2014

Borehole investigation which is mainly used to figure out geotechnical characterizations at construction work has the benefit that it provides a clear and convincing geotechnical information. But it has limitations to get the overall information of the construction site because it is performed at point location. In contrast, geophysical measurements like seismic survey has the advantage that the geological stratum information of a large area can be characterized in a continuous cross-section but the result from geophysics survey has wide range of values and is not suitable to determine the geotechnical design values directly. Therefore it is essential to combine borehole data and geophysics data complementally. Accordingly, in this study, a three-dimensional spatial interpolation of the cross-sectional distribution of seismic refraction was performed using digitizing and geostatistical method (krigring). In the process, digital map were used to increase the trustworthiness of method. Using this map, errors of ground height which are broken out in measurement from boring investigation and geophysical measurements can be revised. After that, average seismic velocity are derived by comparing borehole data with geophysical speed distribution data of each soil layer. During this process, outlier analysis is adapted. On the basis of the average seismic velocity, integrated analysis techniques to determine the three-dimensional geological stratum information is established. Finally, this analysis system is applied to dam construction field.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.5
• /
• pp.109-120
• /
• 2012

In marine site surveys, drilling boreholes are restrictively conducted, while geophysical surveys are used with ease. To overcome the limitations of marine site survey, various site survey data should be collected and analysed by adopting complementary pros and cons. In this study, the integration assessment was established to digitize 2D geo-layer based on the overlapping of a few borehole data to seismic refraction tomography and to determine 3D geo-information based on the kriging for the design of offshore-foundation. And the overlapping method was proposed considering spatial variability of the tomography and separation distance from borehole position to determine the 2D geo-layer. Finally, the integration assessment was applied to offshore wind-turbine site in Jeju-do, and its applicability was verified based on the cross-validation.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.7
• /
• pp.59-68
• /
• 2011

Subsurface Investigation results always reflect a level of soil uncertainty, which sometimes requires statistical corrections of the data for the appropriate engineering decision. This study suggests a closed-form framework to extract the outlying data points from the testing results using the statistical geo-spatial information analyses with outlier analysis and kring-based crossvalidation. The suggested analysis method is conducted to soil stratification using the borehole data in Yeouido.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1016-1019
• /
• 2009

Detailed survey of the rock mass is essential for design, construction and maintenance of rock slope. However, geological survey of poor outcrops and various geophysical aids provides limited information for slope engineering. Remote measurement system for excavation surface (Surface Mapper) and projection s/w for borehole data (Fracjection) are developed for further support of slope surveying. The Surface Mapper measures orientation of joint, fault, foliation on excavated rock surface and database the measured data. The Fracjection projects measurements in boreholes, which are obtained by BIPS, Televideo and DOM operation, to any expected excavation space. These methods promise new approaches for surveying, designing, constructing and maintaining processes of slope.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.15-21
• /
• 2015

Since the introduction of 'the rule for computerizing subsoil investigation results and its application' in 2007, the DB construction of the national geotechnical information by Ministry of Land, Transport and Maritime Affairs (MOLTMA) has been performed. According to the Integrated DB Center of National Geotechnical Information, there have been 180 thousands borehole information stored in the system. In this study, the time-series analyses of precision on the most used information, the depth of stratum and ground water level, were performed to evaluate the effect of the initiation of the rule established in 2007. The precisions were evaluated based on the statistical analyses using kurtosis and normal distribution. Based on the results, the increase of precision after 2007 and the affirmative effects of the rule established in 2007 are confirmed. Furthermore, the precision of the regional information can be achieved with the precision analyses on the information from various areas.

• Geophysics and Geophysical Exploration
• /
• v.16 no.4
• /
• pp.257-267
• /
• 2013

3-D ore modeling was performed to understand the configuration of ore bodies by integrated analysis of borehole and geophysical data in iron-mine area. Five representative indices of rocks were designated, which were obtained from geological survey and borehole. The five indices of rocks were geostatistically simulated by Sequential Indicator Simulation method to delineate boundary of the ore bodies. And Ordinary Kriging and Sequential Gaussian Simulation was applied to make secondary information using resistivity data from magnetotellurics and DC resistivity survey, and this information was used for simple kriging with local varying means, one of integrated kriging techniques. From the correlation analysis between each properties, it was found that high grade of ore is characterized by increased density, whereas the electrical resistivity decreases. With the integrated results of geophysical and borehole data, it was also found that the real configuration of ore body was similar to the modeled result and information about ore grade in 3-D space was obtained.

• Spatial Information Research
• /
• v.12 no.3
• /
• pp.275-283
• /
• 2004

In order to effectively, and accurately assess seawater intrusion in coastal area, multidisciplinary data including geophysical, well logging, and hydrogeochemical data should be managed in systematical way. Such systematical management of data is critical key to improve the re-usability of the data as well as the accuracy of the assessment by means of providing a method of synthetic analysis. Therefore, for systematical management of multidisciplinary data in seawater intrusion problem, we have developed a database management system and 3-D visualization interface based on geographic information system in this, study. All geophysical survey, well logging, hydrochemical, as well as drilling, data are classified as attribute data using Microsoft Access, and joined with spatial information based on ArcView. The database management system and 3-D visualization interface to handle these data, also, developed using the script language of ArcView. We think the development of database and 3-D visualization system will improve the efficiency of data management, user-friendliness of data access, and accuracy of data analysis.