• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1849-1858
• /
• 2021

We analyzed the monthly and annual trends of the meteorological factors(wind speeds and directions and air temperatures) measured at an automated synoptic observation system (ASOS) and fine particle (PM₁₀ and PM_2.5) concentrations measured at the air quality monitoring systems(AQMSs) in Suwon. In addition, we investigated how the fine particle concentrations were related to the meteorological factors as well as urban morphological parameters (fractions of building volume and road area). We calculated the total volume of buildings and the total area of the roads in the area of 2 km × 2 km centered at each AQMS using the geographic information system and environmental geographic information system. The analysis of the meteorological factors showed that the dominant wind directions at the ASOS were westerly and northwesterly and that the average wind speed was strong in Spring. The measured fine particle concentrations were low in Summer and early Autumn (July to September) and high in Spring and Winter. In 2020, the annual mean fine particle concentration was lowest at most AQMSs. The fine particle concentrations were negatively and weakly correlated with the measured wind speeds and air temperatures (the correlation between PM_2.5 concentrations and air temperatures was relatively strong). In Suwon city, at least for 6 AQMSs except for the RAQMS 131116 and AQMS 131118, the PM₁₀ concentrations were affected mainly by the transport from outside rather than primary emission from mobile sources or wind speed decrease caused by buildings and, in the case of PM_2.5, vise versa.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.287-298
• /
• 2005

In this local self-government era, in order to achieve real local decentralization, it is guaranteed to establish self-finances of certain administration level. Nowadays Local equalization scheme is carried out for insuring regional equal development and efficiency and effectiveness of administration and for solving vertical horizontal problem of unequal finance in local government. Local equalization scheme is the system to guarantee the financial source so that all local self-governing organizations can obtain national minimum standard while correcting the unbalance of finance and maldistribution of tax revenue source between regions. This paper presents the directions of improvement so that national subsidy and local tax can contribute to the finance balance of local self-governing organization in the uncertainties of future finance with weak financial ability. Consequently, it is required to operate the system according to balance principle by adjusting the operation form and distribution type such as national subsidy and local tax.

• Journal of the Korean Society for Library and Information Science
• /
• v.40 no.1
• /
• pp.353-372
• /
• 2006

This study aims to investigate the current states of branch systems of public libraries in Korea and to find implications to improve such systems. Nationwide surveys to directors and branch directors of public libraries were conducted along with case studies on major local areas. It was revealed that the duties for each branch were rationally assigned in functional perspectives. The result also revealed that the branch systems of provincial office of education were planned in an inappropriate manner without considering their functional attributes. Other findings included (1) public library branches were necessary to be located in local governments based on the hierarchal structure of the following: a central library, a main local branch. a mobile library unit. public mini-library and deposit station ; (2) Saemaul mobile library and private mini-library service were the most effective when they were provided in conjunction with public library branches.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.83-87
• /
• 2015

LED navigation light installed on the ship performs a important role to ensure safety and prevent collisions with other ships. LED navigation light is mainly used in the night and within the limited visibility by smoke, rainfall. In particular, LED navigation light installed with a clear understanding. LED navigation light is consist of LED module, a control board, a converter, a Fresnel lens, such as enclosure. Russian Society of LED navigation light (RMRS) of the ship to be delivered by drying at Daewoo Shipbuilding & Marine Engineering requires guaranteed reliable products at below $-52^{\circ}C$. conventional LED navigation light has to ensure quality at $-25{\sim}40^{\circ}C$. So, LED navigation light should ensure a problems of random failure or long time operation. In this paper, we present the current status and future plans of reliability so far.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2379-2386
• /
• 2016

This study conducted an analysis using IPA metrics targeting college students to get strategic implications for marketing in the recently fast-growing mobile shopping market. The IPA analysis result about the selection of mobile shopping malls is as follows. First, out of the 21 features, 'reliability of the offered products(6.09)' had the highest level of importance and 'convenience of payment(5.29)' had the highest level of performance. Second, in the area of 'Doing great, Keep it up' 11 features were included such as 'convenience of payment' and 'reliability of the offered products'. Third, the feature that needed to be corrected in the area of 'Focus here' was 'shortening the waiting time for exchange, refund or warranty service'. Fourth, low priority areas in terms of importance and performance, there were 3 features including 'push/notification helps purchases'. Fifth, to the area of 'overdone' 4 features belonged such as 'variety in the type of products'.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.225-228
• /
• 2012

In this paper, a 10-bit digital-to-analog converter (DAC) with small area is proposed. The 10-bit DAC consists of a 8-bit decoder, a 2-bit time-interpolator, and a buffer amplifier. The proposed time-interpolation is achieved by controlling the charging time through a low-pass filter composed of a resistor and a capacitor. To implement the accurate time-interpolator, a control pulse generator using a replica circuit is proposed to minimize the effect of the process variation. The proposed 10-bit Time-Interpolation DAC occupies 61 % of the conventional 10-bit resistor-string DAC. The proposed DAC is designed using a $0.35{\mu}m$ CMOS process with a 3.3 V supply. The simulated DNL and INL are +0.15/-0.21 LSB and +0.15/-0.16 LSB, respectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.195-203
• /
• 1996

The 3-D analysis of terrain for route design and selection is being used as important basic data for effective judgement of political draft. This study is to decide efficient alignment of the entry route and design bridge by modeling, analyzing and displaying surface with digital terrain data. In this study we analyze slope, aspect, shaded-relief, line of sight and watershed on the base of DTM such as contour, TIN and grid. And we can not only esti mate end-area volume for road construction by calculating cut and fill and displaying mass-curve but also recognize the scene after execution with simulation of road and terrain. The result of this study reveals that visual effects of the 3-D terrain data are very effective for designer and decisionmaker to select and review alternative route with regard to terrain characteristics.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.227-239
• /
• 2006

Reliability prediction provides a rational basis for design decisions such as the choice between alternative concepts, choice of part quality levels, derating factors to be applied, use of proven versus state-of-the-art techniques, and other factors. For this reasons, reliability prediction is essential functions in developing space systems. The worth of the quantitative expression lies in the information conveyed with the numerical value and the use which is made of that information and reliability prediction should be initiated early in the configuration definition stage to aid in the evaluation of the design and to provide a basis for item reliability allocation (apportionment) and establishing corrective action priorities. Reliability models and predictions are updated when there is a significant change in the item design availability of design details, environmental requirements, stress data, failure rate data, or service use profile. In this paper, the procedure, selection of reliability data and methods for space system reliability prediction is presented.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.13 no.1
• /
• pp.39-46
• /
• 2007

종고대도현재하단전재건신양생방면점착흔중요위치. 의가(醫家), 도가(道家), 불가등위료보지건강타문주료흔다노력화각식적연구. 하단전시태아재모친복중생활적지방(下丹田是胎兒在母親腹中生活的地方), 시정자재부친체내생장적중요부위시생명성장적지방(是精子在父親體內生長的重要部位是生命成長的地方), 위료보유지건강적영혼화육체취요단련단전보지단전기중최보편적방법취시단전호흡화수기(爲了保維持健康的靈魂和肉體就要鍛鍊丹田保持丹田其中最普遍的方法就是丹田呼吸和手技)(침구(鍼灸), 약(藥), 안마(按摩)), 본고취시통과수기유지건강적단전소주적고찰(本告就是通過手技維持健康的丹田所做的考察). 한의학설(韓醫學說);(종동양사상주기초(從東洋思想做基礎))치인체질병유음양설(治人體疾病有陰陽說), 오행설등동양문화적근원음양설시포괄인간자연계적세계만물(五行說等東洋文化的根源陰陽說是包括人間自然界的世界萬物), 음화양적상대성(陰和陽的相對性), 상보성(相補性), 상련성등(相連性等) 원리주적관찰(原理做的觀察), 오행설시목(五行說是木), 화(火), 토(土), 금(金), 수자연계적삼라만상오류군적상생(水自然界的森羅萬象五類群的相生), 상극(相剋), 상화사득만물질서조율(相和使得萬物秩序調律), 인체시삼라만상(人體是森羅萬象), 우주중적소우주(宇宙中的小宇宙), 산화계곡(山和溪谷), 천화강해(川和江海), 동식물(動植物), 생활도구(生活道具), 건축물(建築物), 천체화무의등조성료인체구조자연화생명적조화중한의학시용침술화약재치료료인적질병(天體和巫醫等組成了人體構造自然和生命的造化中韓醫學是用鍼術和藥材治療了人的疾病). 저양조화유지료신체건강, 여과파배료저종조화상호보충적관계취회출현이상, 취회질인병기질병(就會疾引病起疾病), 소이위료유지신체적조화취요호호적이해신체적구성(所以爲了維持身體的調和就要好好的理解身體的構成), 관리호신체적각부분(管理好身體的各部分). 저시논문규명적취시신체내양생최중요적지방시단전, 하단전적구조이해지후취회명백유지신체조화적경혈적관계(下丹田的構造理解之後就會明白維持身體調和的經穴的關係).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.312-315
• /
• 2014

Smoke generated from business establishments and factories will not only cause air pollution but also have a significant impact on the human body. Generally, the most common method for measuring the turbidity of the plume generated from the stack is a method of observing by the transmissometer mounted in the chimney or Method 9 from the US EPA(Environmental Protection Agency) which is a visual method of determining plume turbid emitted from stationary sources. However, these methods need a lot of cost to build and maintain. In this paper, we build a plume turbidity measurement module programs using light sensing. We design and implement a module which acquires the pictures of the plume using a digital camera and measures the turbidity of it using the DOM(Digital Optical Method). In addition, we demonstrate the excellence by comparing and analyzing implemented module and other methods.