• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.870-873
• /
• 2008

레일패드는 궤도전체의 탄성확보 뿐만 아니라 열차하중에 의해 침목으로 전달되는 충격을 완화시켜 침목과 도상의 파손을 방지하는 역할을 하는데, 통과톤수의 증가와 기후적 요인에 의하여 패드가 열화되면 패드의 강성이 증가하게 된다. 패드의 강성이 증가하게 되면 레일을 통해 침목으로 전달되는 충격하중이 증가하게 되어 침목의 파손을 유발할 수 있을 뿐만 아니라 침목하면의 도상에도 과도한 충격하중을 전달하여 도상의 손상을 가속화시킬 수 있다. 또한 레일패드의 강성변화는 궤도의 소음과 레일의 파상마모의 진전에도 영향을 미치게 된다. 따라서 레일패드의 공용기간 중에 적정한 강성을 유지할 필요가 있으며, 통과톤수의 증가에 따른 레일패드의 경화도를 산정하는 방법과 레일패드의 경화가 궤도에 미치는 영향을 정량적으로 분석하여 레일패드의 교체주기에 관한 기준을 마련할 필요가 있다. 본 연구에서는 슬래브의 질량과 일정속도대역에서의 패드강성의 민감도분석을 하여 그 결과를 비교하고 레일패드경화에 따른 대상궤도의 동적거동을 수치해석을 통하여 패드강성과 차량주행속도에 따른 윤중의 변동량과 레일의 변위, 가속도 그리고 침목의 변위, 가속도의 변화정도를 분석해 보았다. 궤도시스템의 동적해석을 위한 해석 프로그램으로는 네덜란드 델프트 공과대학에서 개발된 궤도시스템 전용 해석 프로그램인 DARTS(The dynamic analysis of a rail track structure)를 사용하였다. 대상궤도는 국내 1단계 경부고속철도에서 사용되고 있는 3중보 무도상궤도를 사용하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.322-322
• /
• 2021

유역에서 나타나는 수문학적인 작용과 사회가 이에 대응하는 과정에서 발생하는 사회수문학적 상호작용을 이해하고자 하는 연구가 지속적으로 진행되고 있으나, 주로 개념적으로 정성적인 분석에 그치고 있다. 본 연구에서는 홍수-경제-기반시설로 구성되는 시스템의 동적거동을 정량적으로 평가하기 위하여 미분방정식 기반의 동적해석시스템을 제시하고 이를 수치해석적으로 해석할 수 있는 방안을 제시하였다. 즉, 제내지에서 인간의 활동, 제내지에서 거주지 확장 및 쇠퇴 등 사회수문학적 관점에서 인문 시스템과 수문 시스템 사이 상호작용을 연구하고 범람원의 동적 변화에 미치는 영향의 개념화 모형과 함께 수치해석적 접근 방법을 제시하였다. 양재천 사례를 중심으로 사회기반시설로서 제방을 고려하였으며, 제방에 투자되는 비용에 따라 세 가지 시나리오로 나눠 양재천의 홍수위험도와 지역사회의 사회수문학적 변화를 모의하였다. 본 연구 방법과 결과로 사회수문학 연구의 중요성을 보여줌으로써 추후 사회수문학의 연구 방향성을 제시하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.685-690
• /
• 2008

Recently, as large structures become lighter and more flexible, the necessity of structural control for reducing excessive displacement and acceleration due to seismic excitation is increased. As a means to minimize seismic damages, various base isolation systems are adopted or considered for adoption. In this study, a base isolation system using hysteretic damper is shown to effectively protect structures against earthquakes. A mechanical model is determined that can effectively portray the behavior of a typical E-shape device. Comparison with experimental results for a hysteretic damper indicates that the model is accurate over a wide range of operating conditions and adequate for analysis. The seismic performance of hysteretic dampers are studied and compared with the conventional systems as a base isolation system. A five-story building is modeled and the seismic performance of the systems subjected to three different earthquake is compared. The results show that the hysteretic damper system can provide superior protection than the other systems for a wide range of ground motions.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.5 s.45
• /
• pp.11-19
• /
• 2005

Seismic design of a building is usually performed by using the linear static procedure. However, the actual behavior of the building subjected to earthquake is inelastic and dynamic in nature. Therefore, inelastic dynamic analysis is required to evaluate the safety of the structure designed by the current design codes. For the validation, a RC special moment resisting frame building was chosen and designed by IBC 2003 representing new codes. Maximum plastic rotation and dissipated energy of some selected members were calculated for examining if the inelastic behavior of the building follows the intention of the code, and drift demand were calculated as well for checking if the building well satisfies the design drift limit. In addition, the effect of including internal moment resisting frames (non lateral resisting system) on analyses results was investigated. As a result of this study, the building designed by IBC 2003 showed the inelastic behavior intended in the code and satisfied the design drift limit. Furthermore, the internal moment resisting frames should be included in the analytical model as they affect the results of seismic analyses significantly.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.2
• /
• pp.109-118
• /
• 2012

Few paper deal with the dynamic bucking under the load with periodic characteristics, and the behavior under periodic excitation is expected the different behavior against STEP excitation. A space frame structure has high stiffness with a structure resisting external forces in steric conformation. According to many structural conditions, structural stability problems in the space frame are determined and considered very important. This study seeks to understand the space frame collapse mechanism using the 2-free nodes truss model in order to examine static structural instability characteristics of the latticed dome. According to geometrical shape, the star dome, parallel lamella dome and three way grid dome were selected as models. The models were examined for characteristics of instability behavior according to rise-span ratio(${\mu}$) and shape imperfection.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.5
• /
• pp.439-450
• /
• 2008

In this study, the reduced system for the dynamic analysis is proposed and the selection criterion of the primary degrees of freedom is presented considering the relation between natural frequency and external loading frequency. A well-constructed reduced system can assure the accurate representation of the dynamic behavior under arbitrary dynamic loads. For selecting the primary degrees of freedom of the reduced system, we employ the robust two-level condensation scheme of which the reliability has been proven through previous study. In the numerical examples, the reliability of the dynamic analysis based on the reduced system is demonstrated through comparing with those of global system.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.6
• /
• pp.5-16
• /
• 2017

Rocking behavior of shallow foundation during the earthquake can reduce the seismic load of the superstructure. The dynamic centrifuge tests were performed to investigate the availability of using rocking behavior for the weathered soil condition. The centrifuge test model was composed of the weathered soil, shallow foundation and single degree of freedom structure. And the accelerations of soil, foundation and structure, and the foundation settlement were measured during the earthquake. From the test result, the seismic load of the structure for the strong earthquake input was reduced by the rocking behavior with foundation uplift and the maximum foundation settlement was less than 0.5% of the foundation width. This shows the potential that the rocking foundation concept can be used in the economical seismic design of foundation for the weathered soil in the future with additional research and verification.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.295-298
• /
• 2008

In this paper, prototype dynamic modeling scheme to control ramjet propulsion systems were proposed. From the physical understandings of engine system, a typical 2nd-order system model was applied to simulate the dynamic characteristics of fuel supply system. The shock location varience in diffuser to chamber pressure fluctuation is calculated so that the out of phase between two signals was observed.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.175-183
• /
• 2013

For the optimal design of the vehicle electric system, it is important to have a reliable modeling tool to predict the dynamic behavior of the automotive battery. In this work, a one-dimensional modeling was carried-out to predict the dynamic behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experiment data of the dynamic behaviors of the lead-acid batteries of two different capacities that were mounted on the automobiles manufactured by Hyundai Motor Company. The discharge behaviors were measured with various discharge rates of C/3, C/5, C/10, C/20 and combination. And dynamic behaviors of charge and discharge were measured. The voltage curves from the experiment and simulation were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, and the current density within the electrodes could be predicted as a function of charge and discharge time.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.141-148
• /
• 2002

MR 유체 감쇠기는 구조물의 진동을 감소시키기 위한 가장 유망하고 새로운 제진 (制振) 장치 중 하나이다. 이 장치는 기계적인 단순성, 높은 동적 범위, 적은 전력 요구량, 커다란 감쇠 능력, 강인성 등의 장점을 가지고 있기 때문에, 토목 구조 시스템의 내진(耐震) 및 내풍(耐風) 성능을 향상시키는데 매우 유용하다. 많은 연구자들이 MR 유체 감쇠기의 유사-정적 모델을 연구했지만 그 모델이 감쇠기의 설계를 위해서는 유용하다고 하더라도, 동적 하중에 대한 감쇠기의 거동을 모사하는 데는 충분하지 않다. 논문에서는 대용량 20톤 MR 유체 감쇠기의 동적하중에 대한 응답 해석 결과를 이용하여, Bouc-Wen 모델을 기반으로 하는 새로운 역학적 모델을 제안하였다. 이 모델은 MR 유체의 stiction현상과 관성 및 shear thinning 효과를 잘 묘사한다. 또한, 제안된 MR 유체 감쇠기의 동적 모델이 실험 결과와 매우 잘 일치함을 보였다.