• Geophysics and Geophysical Exploration
• /
• v.2 no.2
• /
• pp.77-85
• /
• 1999

The 3-D seismic research vessel, Tamhae II, was built to raise up the probability of the hydrocarbon discovery in the Korean continental shelf and the first test survey was completed in the East Sea. During the survey, the 240 channel 2-D marine seismic data were acquired by the Korean flag vessel for the first time. Tamhae II has been equipped with source, receiver, recording equipment, and navigation equipment as well as an onboard processing system. The source is composed of four subarrays and each subarray has six airguns. Total airgun volume is 4578 $in^3$. The receiver consists of two sets of 3 km long 240 channel streamer. In the first survey, the successful acquisition of 2-D seismic data was accomplished. From the result of the data processing, we confirmed that the high quality seismic data were acquired. For the high quality data acquisition, technology of survey design and planning, operation of vessel and equipments and systematic quality control should be developed.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.83-90
• /
• 1997

Aiming at the treatment of large volumes of gas with a low concentration of poorly water soluble VOC(Volatile Organic Compound), a new system is proposed: the combination absorption tower/bioreactor. In the scrubber part of the bioscrubbing system, the contaminating compounds are absorbed in a aqueous phase. The contaminated scrubbing liquid is transported to the bioreactor, where the compounds are biodegraded by aerobic microorganisms (mainly to carbon dioxide, water, and biomass). In this study, separation of a volatile organic compound(VOC) out of a waste gas stream has been carried out using a re-cyclable high boiling point extrant(HBE). The liquid stream containing a high boiling point entrant(HBE) scrubs the gas stream in a direct gas-liquid countercurrent contacting operation in a packed tower for the removal of said component from the gaseous stream. A packed-bed column using Pall Ring was set up in order to simulate practical conditions for the scrubbing tower. The liquid stream transported to the bioreactor is recovered and recycled to the scrubber. The model gas, which contained 400 mg/$\textrm{m}^3$ of toluene, at a rate of 100 L/min, flowed into the packed column where the scrubbing liquid trickled over the packing in countercurrent to the rising gas at 10~15L/min. The bioscrubber designed for large volume air streams containing VOCs showed removal efficiency up to 80% in an optimum operating conditions during the tests fer removing toluene from an air stream by scrubbing the air stream with HBE.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1011-1016
• /
• 1999

This study was performed to search a physical method having high yield and quality and minimum environmental pollution for extraction of pectin from apple pomace. Based on the physical solubilization of plant cell wall under the condition of high temperature, pressure and shearing stress, apple pomace was treated by a corotating intermeshing type twin-screw extruder with the diameter-to-length ratio of 1/20. The specific mechanical energy of extruder was introduced as system parameter for extrusion process modeling and the shaft speed, feed rate and moisture content as process variables. The yield, average molecular weight and galacturonic acid content of water-soluble polysaccharides obtained by extrusion were, respectively, modeled with the linear functions of the system parameter which was of the form as a linear function of process variables. The specific mechanical energy increased with increase of shaft speed and with decrease of feed rate and moisture content. Out of process variables, moisture content had the greatest effect on specific mechanical energy. The yield increased with increase of specific mechanical energy while the average molecular weight and galacturonic acid content increased with its decrease. In aspects of yield and quality of pectin, the results from this study showed the possibility to replace a traditional acidic method with the extrusion treatment of this study.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.1051-1056
• /
• 2007

In current web-based systems, it is generally recognized that one way flow of information from providers to users can cause the static problem of document structure. Therefore, information update frequency and interaction between providers and users are quiet slow. Monopolized information can obstruct the free user's access and heterogeneous format and different protocols also make users difficult to retrieve and to collect information. To resolve these problems, in this study, we introduce the Web 2.0 to move toward the user's participation and share based on the social network and the OAI protocol to improve the free access and the interoperability on bibliographic information for Life Science and then design the bibliographic information network for life science. This network has four main functions such as: 1) Open Repository function that can make up user community for sharing and data exchange. Data such as article, seminar material, research note and research report are considered in design. 2) Open Collection function that can collect and store the metadata on distributed bibliographic information networks, 3) Open Access function that can manage the metadata in the open access environment, and 4) Administration function that can monitor the user activity and statistics and can inspect the registered data.

• Journal of The Korean Association For Science Education
• /
• v.37 no.2
• /
• pp.323-334
• /
• 2017

Current science education aims to guide students as future responsible citizens to make informed decisions on socioscientific issues (SSI). In the authors' previous study, it was found that conceptions of nature of technology (NOT) were explicitly represented in various contexts of SSI with differentiated levels of understanding, and cases of the informed NOT understanding included the key features of well-reasoned SSI decision-making. Therefore, enhancing NOT understanding could be one of the elements to leverage students' informed SSI decision-making. In this study, we developed a rubric to assess NOT understanding in the context of SSI and applied it to evaluate the impact of SSI instruction. Participants were 58 college students who took an SSI course for 6 weeks. Before and after the SSI course, they were asked to write decision-making essays on the Golden Rice issue (a type of genetically modified food). As a result of analyzing the pre- and post decision-making essay using the rubric, it was found that NOT understanding was improved after the SSI course; in addition, the salient patterns of NOT changes were analyzed in detail in order to gauge the influence of the SSI classes. Implications for science education were discussed.

• Journal of the Korea Computer Graphics Society
• /
• v.8 no.2
• /
• pp.15-22
• /
• 2002

Image segmentation methods partition an image into meaningful regions. For image composition and analysis, it is desirable for the partitioned regions to represent meaningful objects in terms of human perception and manipulation. Despite the recent progress in image understanding, however, most of the segmentation methods mainly employ low-level image features and it is still highly challenging to automatically segment an image based on high-level meaning suitable for human interpretation. The concept of HCI (Human Computer Interaction) can be applied to operator-assisted image segmentation in a manner that a human operator provides guidance to automatic image processing by interactively supplying critical information about object boundaries. Intelligent Scissors and Snakes have demonstrated the effectiveness of human-assisted segmentation [2] [1]. This paper presents a method for interactive image segmentation for more efficient and effective detection and tracking of object boundaries. The presented method is partly based on the concept of Intelligent Scissors, but employs the well-established Canny edge detector for stable edge detection. It also uses "sewing method" for including weak edges in object boundaries, and 5-direction search to promote more efficient and stable linking of neighboring edges than the previous methods.

• Journal of the Korea Convergence Society
• /
• v.7 no.5
• /
• pp.29-34
• /
• 2016

Recently, with the development of high-tech industry, the use of the drones in various aspects of daily life is rapidly advancing. With technical and functional advancements, drones have an advantage of being easy to be utilized in the areas of use according to various lifestyles. In addition, through the diversification of the drone service converged with image processing medium such as camera and CCTV, an automated security system that can replace humans is expected to be introduced. By designing these unmanned security technology, a new convergence security drone service techniques that can strengthen the previous drone application technology will be proposed. In the proposed techniques, a biometric authentication technology will be designed as additional authentication methods that can determine the safety incorporated with security by selecting the search and areas of an object focusing on the objects in the initial windows and search windows through OpenCV technology and CAM-Shift algorithm which are an object tracking algorithm. Through such, a highly efficient security drone convergence service model will be proposed for performing unmanned security by using the drones that can continuously increase the analysis of technology on the mobility and real-time image processing.

• Journal of the Korea Concrete Institute
• /
• v.28 no.2
• /
• pp.197-204
• /
• 2016

Concrete walls of neutron generating facilities such as fusion reactors and fission reactors become radioactive by neutron irradiation. Both low-activation and neutron shielding are a critical concern at the dismantling stage after the shutdown of facilities with a requirement of radioactive waste management. To tackle this, two types of additives were investigated in fabricating mortar specimens: synthetic high polymers and boron carbide. It is well known that a hydrogen atom is effective in neutron shielding by an elastic scattering because its mass is almost the same as that of the neutron. And boron is an effective neutron absorber with a big neutron absorption cross section. In this study, the effect of the type, shape, and size of polymers were investigated as well as that of boron carbide. Total 16 mix designs were prepared to reveal the effect of polymers on mechanical properties and neutron shielding performance. The neutron does equivalent of polymers-based mortar for fast neutrons decreased by 36 %, and the count rate of boron carbide-based mortar with regard to thermal neutrons decreased by 90 % compared to conventional mortar. These results showed that a combination of polymers and boron carbide compounds has potential to reduce the thickness of neutron shields as well as radioactive waste from reactors.

• International Commerce and Information Review
• /
• v.9 no.1
• /
• pp.403-425
• /
• 2007

The sudden emergence of China as a superpower in world politics and economics is apparently a big surprise. This, however, is not an unusual incident. As far as the Chinese are concerned, they say that China is simply running almost the same track that its neighboring countries. In the recent years, a number of experts and scholars have expected that the emergence of China as a great economic power will be argued as a major issue in world politics and economics. So its economic progress will require experts and scholars to watch carefully how China is going to change. It certainly has created an atmosphere that most of the world leaders, experts and scholars are very concerned about China's remarkable performance in its economics and then willing to accept China's rapid growth as an urgent matter. Many experts and scholars began to analyze carefully the factors that have contributed to the rapid growth. Foreign direct investment (FDI), import-export, and economic reform were then listed as the most important factors. As a result, philosophy of economics, analytical economics, and economics are immediately needed for China who is at the moment very anxious to sustain the stable and continuity of rapid economic growth. But unfortunately China does not even recognize the reason why they need to adopt these economic concepts and methods.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.71-82
• /
• 2020

The existing transportation system, which is based on internal combustion engines, is rapidly being converted to electrification. Thus, eco-friendly public transportation with high transportation efficiency will continue to spread throughout the market in the near future. The purpose of this study is to compare and analyze the cognitive characteristics of passengers redgarding the technical and social factors of various public transportation means to help a successful introduction of eco-friendly public transit. Through a survey questionnaire (N=485), seven factors of seven transportation modes were evaluated and analyzed using principal component analysis. As a result, it is confirmed that potential passengers have high expectations for the eco-friendliness and city image of the eco-friendly buses. Also, it is confirmed that eco-friendly buses are superior in cleanliness and ride comfort than diesel buses. Given the study's results, this study identifies the cognitive characteristics of passengers regarding eco-friendly public transportation. We hope that these results will be used as basic information for image positioning and improved service with the use of eco-friendly transportation.