• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.937-942
• /
• 2001

The present study was conducted to identify the mechanism about the regulation of appetite by examining the expression patterns of vasoactive intestinal peptide in the hypothalamus of either fasted for 24 hours or anorexia mutant mouse. In order to investigate expression pattern of the vasoactive intestinal peptide, immunohisto-chemistry was employed along with reverse transcription polymerase chain reaction (RT-PCR) and dot blotting. Immunohistochemistry has shown that level of expression of vasoactive intestinal peptide and appetite-suppessing neuropeptide, was lower in the suprachiasmatic nucleus (SCN) and higher in the paraventricular nucleus (PVN) of the anorexia mutant group than in the comparable regions in the control group. This pattern was repeated in the fasting group, which also showed lower and higher levels of vasoactive intestinal peptide expression in the SCN and PVN respectively, In contrast, the vasoactive intestinal peptide mRNA level in the entire hypothalamus via RT-PCR and dot blotting was similar in the fasting and control groups, while it was significantly increased in the anorexia mutant group.

• Development and Reproduction
• /
• v.13 no.4
• /
• pp.257-264
• /
• 2009

A neurotoxin, 6-hydroxydopamine (6-OHDA) has been widely used to create animal model for Parkinson's disease (PD) due to its specific toxicity against dopaminergic (DA) neurons. Since DA signals modulate a broad spectrum of CNS physiology, one can expect profound alterations in neuroendocrine activities of both PD patients and 6-OHDA treated animals. Limited applications of 6-OHDA injection model, however, have been made on the studies of hypothalamuspituitary neuroendocrine circuits. The present study was performed to examine whether blockade of brain catecholamine (CA) biosynthesis with 6-OHDA can make any alteration in the transcriptional activities of hypothalamus-pituitary hormone genes in adult male rats. Three-month-old male rats (SD strain) were received 6-OHDA ($200{\mu}g$ in $10{\mu}\ell$ of saline/animal) by intracerebroventricular (icv) injection, and sacrificed after two weeks. To determine the mRNA levels of hypothalamuspituitary hormone genes, total RNAs were extracted and applied to the semi-quantitative RT-PCRs. The mRNA levels of tyrosine hydroxylase (TH), the rate-limiting enzyme for the catecholamine biosynthesis, were significantly lower than those from the control group (control:6-OHDA=1:0.72${\pm}$0.02AU, p<0.001), confirming the efficacy of 6-OHDA injection. The mRNA levels of gonadotropin-releasing hormone (GnRH) and corticotropin releasing hormone (CRH) in the hypothalami from 6-OHDA group were significantly lower than those from the control group (GnRH, control:6-OHDA=1:0.39${\pm}$0.03AU, p<0.001; CRH, control:6-OHDA=1:0.76${\pm}$0.07AU, p<0.01). There were significant decreases in the mRNA levels of common alpha subunit of glycoprotein homones (Cg$\alpha$), LH beta subunit (LH-$\beta$), and FSH beta subunit (FSH-$\beta$) in pituitaries from 6-OHDA group compared to control values (Cg$\alpha$, control:6-OHDA=1:0.81${\pm}$0.02AU, p<0.001; LH-$\beta$, control:6-OHDA=1:0.68${\pm}$0.04AU, p<0.001; FSH-$\beta$, control:6-OHDA=1:0.84${\pm}$0.05AU, p<0.001). Similarly, the level of adrenocorticotrophic hormone (ACTH) transcripts from 6-OHDA group was significantly lower than that from the control group (control: 6-OHDA=1:0.86${\pm}$0.04AU, p<0.01). The present study demonstrated that centrally injected DA neurotoxin could downregulate the transcriptional activities of the two hypothalamus-pituitary neuroendocrine circuits, i.e., GnRH-gonadotropins and CRH-ACTH systems. These results suggested that hypothalamic CA input might affect on the activities of gonad and adrenal through modulation of hypothalamus-pituitary function, providing plausible explanation for frequent occurrence of sexual dysfunction and poor stress-response in PD patients.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.1-8
• /
• 2019

Globally, the elderly population is increasing rapidly, which means that the number of deformity correction operations for elderly spine deformity patient has increased. On the other hand, for aged patients with deformity correction operation, preoperative considerations to reduce the complications and predict a good clinical outcome are not completely understood. First, medical comorbidity needs to be evaluated preoperatively with the Cumulative Illness Rating Scale for Geriatrics or the Charlson Comorbidity Index scores. Medical comorbidities are associated with the postoperative complication rate. Managing these comorbidities preoperatively decreases the complications after a spine deformity correction operation. Second, bone densitometry need to be checked for osteoporosis. Many surgical techniques have been introduced to prevent the complications associated with posterior instrumentation for osteoporosis patients. The preoperative use of an osteogenesis inducing agent - teriparatide was also reported to reduce the complication rate. Third, total body sagittal alignment need to be considered. Many elderly spine deformity patients accompanied degenerative changes and deformities at their lower extremities. In addition, a compensation mechanism induces the deformed posture of the lower extremities. Recently, some authors introduced a parameter including total body sagittal alignment, which can predict the clinical outcome better than previous parameters limited to the spine or pelvis. As a result, total body sagittal alignment needs to be considered for elderly spine deformity patients after a deformity correction operation. In conclusion, for elderly spine deformity patients, medical comorbidities and osteoporosis need to be evaluated and managed preoperatively to reduce the complication rate. In addition, total body sagittal alignment needs to be considered, which is associated with better clinical outcomes than the previous parameters limited to the spine or pelvis.

• Journal of Gastric Cancer
• /
• v.2 no.4
• /
• pp.175-179
• /
• 2002

위암의 진단에서 CT스캔은 수술 전 병기결정이나 수술 후 추적검사에서 필수적인 검사방법으로 인정을 받고 있고, 보편적으로 가장 많이 유용되고 있다. 그러나 나선식 CT를 사용하고 여러 가지 스캔방법의 개선에도 불구하고, 인접장기로의 직접침윤, 작은 크기의 간전이의 발견, 정상 크기범위의 림프절에서 전이의 발견, 양성 림프절과 전이의 감별, 복막전이에 대한 평가에서 지금까지의 보고들은 만족스러운 결과를 얻지 못하고 있으며 CT의 한계점으로 남아 있다. 그러나 최근에는 나선식 CT보다 더 빠른 시간내 더 얇은 두께의 절편을 얻을 수 있고, 이를 이용하여 관상면 및 시상면으로 정밀하게 재구성하거나 3D영상을 얻을 수 있는 다검출식 나선식 CT가 개발되어 사용되고 있고, CT 진단의 정확도를 높일 것으로 기대한다.

• The korean journal of orthodontics
• /
• v.35 no.4 s.111
• /
• pp.320-329
• /
• 2005

The three-dimensional (3D) changes of bone, soft tissue and the ratio of soft tissue to bony movement was investigated in 8 skeletal Class III patients treated by mandibular setback surgery. CT scans of each patient at pre- and post-operative states were taken. Each scan was segmented by a threshold value and registered to a universal three-dimensional coordinate system, consisting of an FH plane, a mid-sagittal plane, and a coronal plane defined by PNS. In the study, the grid parallel to the coronal plane was proposed for the comparison of the changes. The bone or soft tissue was intersected by the projected line from each point on the gird. The coordinate values of intersected point were measured and compared between the pre- and post-operative models. The facial surface changes after setback surgery occurred not only in the mandible, but also in the mouth corner region. The soft tissue changes of the mandibular area were measured relatively by the proportional ratios to the bone changes. The ratios at the mid-sagittal plane were $77\~102\%(p<0.05)$. The ratios at all other sagittal planes had similar patterns to the mid-sagittal plane, but with decreased values. And, the changes in the maxillary region were calculated as a ratio, relative to the movement of a point representing a mandibular movement. When B point was used as a representative point, the ratios were $14\~29\%$, and when Pog was used, the ratios were $17\~37\%(9<0.05)$. In case of the 83rd point of the grid, the ratios were $11\~22\%(p<0.05)$.

• The korean journal of orthodontics
• /
• v.38 no.6
• /
• pp.427-436
• /
• 2008

Objective: The purpose of this study is to compare landmark position between cephalometric radiography and midsagittal plane projected images from 3 dimensional (3D) CT. Methods: Cephalometric radiographs and CT scans were taken from 20 patients for treatment of mandibular prognathism. After selection of land-marks, CT images were projected to the midsagittal plane and magnified to 110% according to the magnifying power of radiographs. These 2 images were superimposed with frontal and occipital bone. Common coordinate system was established on the base of FH plane. The coordinate value of each landmark was compared by paired t test and mean and standard deviation of difference was calculated. Results: The difference was from $-0.14{\pm}0.65$ to $-2.12{\pm}2.89\;mm$ in X axis, from $0.34{\pm}0.78$ to $-2.36{\pm}2.55\;mm$ ($6.79{\pm}3.04\;mm$) in Y axis. There was no significant difference only 9 in X axis, and 7 in Y axis out of 20 landmarks. This might be caused by error from the difference of head positioning, by masking the subtle end structures, identification error from the superimposition and error from the different definition.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.92-97
• /
• 2009

Low power consumption is crucial for medical implantable devices. A low-power 4th-order band-pass Gm-C filter with distributed gain stage for the sensing stage of the implantable cardiac pacemaker is proposed. For the implementation of large-time constants, a floating-gate operational transconductance amplifier with current division is employed. Experimental results for the filter have shown a SFDR of 50 dB. The power consumption is below $1.8{\mu}W$, the power supply is 1.5 V, and the core area is $2.4\;mm{\times}1.3\;mm$. The filter was fabricated in a 1-poly 4-metal $0.35-{\mu}m$ CMOS process.

• The monthly packaging world
• /
• s.230
• /
• pp.92-99
• /
• 2012

KOREA STAR AWARDS는 패키징 $\triangle$완제품 $\triangle$재료(플라스틱, 종이 판지, 금속, 유리, 목재, 복합소재) $\triangle$친환경 $\triangle$기계(설비) 및 관련 부품 $\triangle$ 인쇄(라벨링) $\triangle$부자재 $\triangle$생산 및 가공공정 $\triangle$패키징 디자인 등의 분야에서 신기술 개발과 지속가능성을 통해 패키징 산업 발전에 기여한 기업, 그리고 패키징 관련 정책연구, 기술개발, 패키징산업 육성에 기여한 개인에게 시상. 2012 KOREA STAR AWARDS는 코리아스타상(기업, 학생, 공로부문)으로 지식경제부장관상(상장4점, 표창2점), 한국생산기술연구원장상(상장 12점, 표창1점), 한국포장기술사회장상(상장 20점) 총 39점 시상. 코리아스타상 기업부문 지식경제부장관상은 '에이스기계 종이상자 자동접착기의 패스트 폴딩 장치', 'LG생활건강 이자녹스 SMART 진동시리즈', '삼성전자 냉장고 친환경 재사용 포장', '한국에이버리 친환경 수분리성 점착라벨' 4개 제품 수상. 코리아스타상 공로부문 지식경제부장관표창은 (주)경연전람 김영수 대표와 김수일포장개발연구소 김수일 소장 수여. 본 고에서는 "2011 미래패키징 신기술 정부포상" 수상작들의 패키징 동향 및 유공자들의 공적 내용을 살펴보도록 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.3
• /
• pp.398-405
• /
• 2003

A fast response analyzer for measuring carbon dioxide concentration has been developed for transient characteristic and researches tested on internal combustion engine. The analyzer uses the well known NDIR(Non-Dispersive Infrared) method with miniaturized detection system, giving a time constant of approximately 30 microsecond, and sampling module consists of capillary tube. Since the transit time and the time constant of the sampling system depend on the sampling conditions, it is necessary to investigate the characteristics of sampling system before applied to exhaust gas measurement in engine. A unique method was designed to study the influence of the diameter of transfer sample line and operating conditions of the FRNDIR on transit time and time constant. A database of transit time and time constant was built up for different measured and simulated pressure conditions. The database can be used for correcting eventual $CO_2$ concentration measurement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.4
• /
• pp.345-350
• /
• 2016

Transferring condylar and anterior guidance on an articulator is essential to the diagnosis of a patient for full mouth reconstruction. In this clinical report, ARCUS digma I system was used to measure inherent condylar guidance of a patient requiring full mouth reconstruction in preoperate treatment, and the patients was given provisional restoration based on a functional anterior guidance. Then, ARCUS digma II system was used to mount the final casting model on an articulator, and the definitive prosthesis was placed in the patient. An esthetic and functionally proper clinical result regarding inherent condylar path of the patient was observed, and results from comparison of the two systems are given in this case.