• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.129-134
• /
• 2007

In general, based on traffic data in a ideal traffic condition, BPR cost function is used to a variety of transportation policies. However, Some researchers have reported that BRP cost function is not appropriate for analyzing traffic pattern as well as forecasting future demand.(Spiess, 1989 ; Singh, 1999) Therefore, in this paper to solve this problem, a methodology based on data through Micro traffic Simulator Based(MSB) is developed. As a result following outputs are obtained ; (1) presenting a methodology to develop a travel cost function through VISSIM in order to assess transportation policies and (2) developing BRP cost function and MSB cost function from data analysis through VISSIM and verifying availability of MSB function by comparative analysis.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.161-167
• /
• 2018

A clinician's skills in a dental clinic are an important factor in removing the risk factors of patients. Although many universities have conducted educational programs, there has been a limitation on repeated practice because of the limited space and equipment. In dental radiography, there are various intraoral radiographic techniques. Since proficiency in radiography is an important factor in obtaining accurate radiographs, repeated practice and skill learning are important at the pre-clinical stage. However, the recent amendment of diagnostic radiation has caused difficulties in repeated practice on the human body. This study aims to develop a clinical simulator for intraoral radiography that enables repeated practice and self-directed learning without any restriction by utilizing the augmented reality technology to foster clinical skills for dental hygienist.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.254-254
• /
• 2023

도시화로 인한 불투수면 증가에 따른 물 순환 왜곡 현상이 발생하고 있으며, 이에 따라 물관리를 위한 저영향개발 기법이 국내외에서 적극 도입되고 있는 실정이다. 따라서 본 연구에서는 강우입력에 따라 LID 해석이 가능한 저영향개발 디지털트윈 분석 시뮬레이터를 개발하였다. LID DT 분석 모듈은 LID 시설 해석에 특화된 모형으로 시나리오 강우 기반 시뮬레이션 및 실시간 강우량 연동을 통한 모의가 가능하며, LID 시뮬레이션을 위해 개별적으로 활용함과 동시에 실시간 강우량 연계 시뮬레이션이 가능하도록 개발하였다. 유역유출 계산은 SWMM 모형의 비선형 저류방정식을 기반으로 유출해석 및 기본 LID 해석은 EPA SWMM 엔진으로 해석하며 저수지 추적이 요구되는 빗물이용시설의 경우 별도의 모듈을 적용하였으며, SWMM LID 해석 결과의 시설별 상세 결과 표출이 가능하도록 개발하였다. 현재 LID DT 모형의 시범 지구 적용은 세종시 6-4 생활권 해밀마을을 대상으로 하였다. 소유역 24개소, 우수관로 27개소, 소유역 24개소 및 유역면적 51ha로, 총 64개의 LID 시설을 시설형식을 구분하여 소유역별로 적용하였다. LID 시설의 강우 발생일에 대한 첨두유량과 관측 결과를 비교하여 정상 상황과 비정상 상황의 유량 오차 발생 시 점검 경보 알림 기준을 설정하였으며, 이를 통해 LID 시설의 유지보수 정보를 제공할 수 있을 것으로 예상된다. 또한 실시간 강우 모의를 통해 빗물이용시설의 저류조 용량 대비 현재 빗물저류량을 계산하여 빗물이용시설의 빗물저류량에 대한 정보를 제공하여 물부족 발생알림을 제공 가능할 것으로 예상된다. 따라서 LID DT 시뮬레이터에 및 빗물이용시설 운영에 대한 의사결정 정보를 제공할 수 있을 것으로 판단된다.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.1-6
• /
• 2024

Aid-to-Navigation facility is important for maritime traffic safety. In Korea, for safe maritime traffic, the Ministry of Oceans and Fisheries is using an Aid-to-Navigation management system. The current Aid-to-Navigation management system displays information based on text, making it difficult to determine the impact if Aid-to-Navigation fails or an accident occurs. A simulator can be used to verify the placement of Aid-to-Navigation. However, real-time information is not applied and maintenance of the simulator is expensive. Additionally, the Aid-to-Navigation simulator cannot simulate effects of port backlighting. To improve these issues, we proposed an Aid-to-Navigation management platform based on digital twin technology. This system can predict failures by analyzing real-time sensor data collected from navigation signs. We plan to develop a function that can simulate Aid-to-Navigation placement. Aid-to-Navigation is expected to be managed efficiently by applying digital twin technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.160-166
• /
• 2021

In this study, we aim to develop a scenario for educational utilization of disaster response robots that can be used at fire sites and analyze the effectiveness of scenarios according to robot utilization education. Our scenarios were developed based on direction, reality, and rationality determined through the use of a questionnaire survey distributed to current firefighters. In addition, the educational utilization of disaster response robots and training effectiveness were analyzed through repetitive robot control training by a robot development team, current firefighters, and college students. Robot control was divided into direct control, monitor control, and simulation control, and tests were carried out five times. As a result of the analysis of the robot control test, the average time spent for each group was 28 seconds for college students, followed by development teams (30second) and incumbent firefighters (38second). According to the individual analysis results, firefighters (maximum 35second) in direct control, the development team (maximum 14second) in monitor control, and firefighters (maximum 22second) in simulation control showed the effect of shortening control time. These results show that robot control education and training is necessary for robots to be used more effectively at disaster sites.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.319-327
• /
• 2010

A nuclear plant ESF ACS simulator was designed, built, and verified to perform experiment related to ESF ACS of nuclear power plants. The dimension of 3D CAD model was based on drawings of the main control room(MCR) of Yonggwang units 5 and 6. The CFD analysis was performed based on the measurement of the actual flow rate of ESF ACS. The air flowing in ACS was assumed to have $30^{\circ}C$ and uniform flow. The flow rate across the HEPA filter was estimated to be 1.83 m/s based on the MCR ACS flow rate of 12,986 CFM and HEPA filter area of 9 filters having effective area of $610{\times}610mm^2$ each. When MCR ACS was modeled, air flow blocking filter frames were considered for better simulation of the real ACS. In CFD analysis, the air flow rate in the lower part of the active carbon adsorber was simulated separately at higher than 7 m/s to reflect the measured value of 8 m/s. Through the CFD analyses of the ACSes of fuel building emergency ventilation system, emergency core cooling system equipment room ventilation cleanup system, it was confirmed that all three EFS ACSes can be simulated by controlling the flow rate of the simulator. After the CFD analysis, the simulator was built in nuclear grade and its reliability was verified through air flow distribution tests before it was used in main tests. The verification result showed that distribution of the internal flow was uniform except near the filter frames when medium filter was installed. The simulator was used in the tests to confirm the revised contents in Reg. Guide 1.52 (Rev. 3).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.889-898
• /
• 2000

In order to support various broadband multimedia servies in the future, we designed a well balanced WDM backbone network. In Korean network traffic environment, six regional centers are selected, link capacities between the regional centers are estimated from the PDI traffic model, and the overall network configuration is designed for the all-optical backbone network. Also, we designed a basic configuration to be able to protect minimum communication capability against link failure. A simulation study is carried out to verify the desired performance of the designed WDM backbone network. Simulation results show that performance of the backbone network is well balanced to support various communication services in Korea in the mid 2000s

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.245-247
• /
• 2012

최근 멀티코어 프로세서의 활용이 대중화되고 있다. 멀티코어 시스템에서는 소프트웨어가 동시에 여러 코어를 사용하여 동작을 수행 할 때 성능 향상 효과를 얻을 수 있다. 즉, 하나의 소프트웨어가 여러 코어를 동시에 사용할 수 있는 멀티스레드 프로그래밍 기법을 사용할 때 성능을 높일 수 있다. 이러한 환경에서 효율적인 메모리 할당은 데스크톱, 서버 및 과학 등과 같은 응용에 매우 중요하다. 하지만, 동적으로 메모리를 할당하는 것은 메모리 할당 연산과 반환 연산 및 어떤 스레드가 다른 스레드의 힙 영역에 접근하는 것을 처리하기 위한 동기화 문제로 인한 오버헤드가 발생하여 성능에 영향을 끼치는 문제가 발생하게 된다. 따라서 이와 같은 환경에서 실제로 성능에 어느 정도 영향을 끼칠 것인가를 측정할 수 있는 도구가 필요하다. 이에 멀티코어 환경에서 멀티스레드 기법을 사용하여 메모리 할당 연산이 성능에 어떠한 영향을 끼치는지를 측정 및 평가할 수 있는 시뮬레이터인 MAES(Memory Allocation Evaluation Simulator)를 설계하고 구현한다.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1239-1245
• /
• 2009

가상현실의 자연스러운 응용분야는 작업 훈련(Task Training) 분야이다. 이러한 작업 훈련 분야에서 가장 중요한 요소 중 하나는 각성 수준(Arousal Level)으로, 적절한 각성 수준은 과제 훈련의 효과를 결정짓는다. 본 연구는 VR 환경과 Desktop 환경의 자동차 운전 시뮬레이터에서 피험자가 실험을 위하여 설계된 2 개의 시나리오를 수행하는 동안 피험자의 생리 신호를 측정하고, 실험 후 각 환경에 대한 주관적인 실재감을 측정하여, 두 실험 환경 사이에 피험자의 주관적인 실재감이 유의한 차이가 있는지 알아보고, 피험자가 수행한 시나리오와 시나리오에 종속된 실험 태스크에 대하여, 각성 수준을 평가할 때 유용한 지표로 활용되는 피부전도도(GSR) 반응이 피험자의 주관적인 실재감의 결과와 어떠한 관계를 보이는지 살펴 보았다. 실험 결과 두 실험 환경 사이의 피험자의 주관적인 실재감은 유의한 차이가 있었고, VR 환경에서 더 높게 나왔다. 그러나 두 실험 환경 사이의 피험자의 생리적 각성 반응은 실재감의 결과처럼 유의한 차이를 보여주지 못했으며, 오히려 시나리오에 종속된 실험 태스크에 따라서 유의한 차이를 보여주었다. 따라서 실재감과 피부전도도 (GSR)측정에 의한 각성도 는 직접적인 관계가 적은 것으로 생각되며, 이는 피부전도도(GSR)를 실재감의 한 척도로 쓰기에는 적합하지 않을 수 있다는 것을 의미한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.917-922
• /
• 2016

There are many researches related on the brain wave signals to monitor the state of human health. Especially, some patients in the medical hospital need to be monitored in case of emergencies such as a seizure, an epilepsy and so on. To support QoS of the brain wave network in the hospital is a vital issue and the Opnet simulator is used for this experiment. So the efficient network topology is required for the stability of the brain wave network service. The brain waves of the patients are collected from the sensor devices in the network. Two different sensor network topologies are suggested and simulated for the comparison of the network performance. One topology is localized and the other is non-localized network. The simulation is operated with the Opnet simulator.