• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.465-470
• /
• 2001

A pretreatment procedure was performed to improve recovery of selenium from enriched egg and dried pork. Samples were digested with only $HNO_3$ in beaker at $150^{\circ}C$ for 3 hrs, and Se was determined by ICP-MS. Recovery of selenium was 94.2%, and its C.V. value was 2.48%. The analytical results of Se by this method were 0.13 - 2.71 mg/kg for egg and 0.36 - 4.19 mg/kg for dried pork.

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.191-200
• /
• 2017

There have been great efforts to develop a rapid and sensitive detection method to monitor the presence of pathogenic bacteria in food. While a number of methods have been reported for bacterial detection with a detection limit to a single digit, most of them are suitable only for the bacteria in pure culture or buffered solution. On the other hand, foods are composed of highly complicated matrices containing carbohydrate, fat, protein, fibers, and many other components whose composition varies from one food to the other. Furthermore, many components in food interfere with the downstream detection process, which significantly affect the sensitivity and selectivity of the detection. Therefore, isolating and concentrating the target pathogenic bacteria from food matrices are of importance to enhance the detection power of the system. The present review provides an introduction to the representative sample preparation strategies to isolate target pathogenic bacteria from food sample. We further describe the nucleic acid-based detection methods, such as PCR, real-time PCR, NASBA, RCA, LCR, and LAMP. Nucleic acid-based methods are by far the most sensitive and effective for the detection of a low number of target pathogens whose performance is greatly improved by combining with the sample preparation methods.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.5
• /
• pp.62-70
• /
• 2009

A field soil highly contaminated with petroleum hydrocarbons (JP-8 and diesel fuels) was employed for its remediation by a lab-scale thermal desorption process. The soil was collected in the vicinity of an underground storage tank in a closed military base and its contamination level was as high as 4,476 ppm as total petroleum hydrocarbon (TPH). A lab scale directly-heated low temperature thermal desorption (LTTD) system of 10-L capacity was developed and operated for the thermal treatment of TPH contaminated soils in this study. The desired operation temperature was found to be approximately $200-300^{\circ}C$ from the thermal gravimetric analysis of the contaminated field soils. The removal efficiencies higher than 90% were achieved by the LTTD treatment at $200^{\circ}C$ for 10 min as well as at $300^{\circ}C$ for 5 min. As the water content in the soils increased and therefore they were likely to be present as lumps, the removal efficiency noticeably decreased, indicating that a pre-treatment such as field drying should be required. The analysis of physical and chemical properties of soils before and after the LTTD treatment demonstrated that no significant changes occurred during the thermal treatment, supporting no needs for additional post-treatments for the soils treated by LTTD. The results presented in this study are expected to provide useful information for the field application and verification of LTTD for the highly contaminated geo-environment.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.279-288
• /
• 2007

We have studied a method for the preparation of $ACF/TiO_2$ composites involving the penetrationof titanium n-butoxide (TNB) solution into activated carbon fiber. It was focused on the characterization of $TiO_2$ formed in prorous carbon was which increased with surface functional groups by hydrochloric acid treatment. The conversion of TNB to $TiO_2$ for the acid treatment effect must be important for the preparationof $ACF/TiO_2$ composites. From the characterization of surface properties, both the BET surface area and the total pore volume decreased as the distribution of $TiO_2$ on the activated carbon fiber surfaces after acid treatments.The changes in XRD pattern showed the typical anatase type on $ACF/TiO_2$ composite for the sample named FT, FT1 and FT2 treated with 0.05, 0.1 and 0.5 M, respectively. However, XRD patern of FT3 treated with 0.5M showed mixed amatase-rutile structure. According to the results of SEM micrographs, the titanium complexe particles were irregularly distributed around carbon. And some large clusters were found when an amount of acid treatment increased. The EDX results of $ACF/TiO_2$ composites showed the presence of C, O and P with strong Ti peaks. Finally, the excellent photocatalytic activity of the $ACF/TiO_2$ composites between relative concentration($c/c_o$) of MB (methylene blue) and UV irradiation time could be attributed to the both effects between photocatalysis of the formation of titania complexes and adsorptivity of the activated carbon fiber.

• Analytical Science and Technology
• /
• v.29 no.6
• /
• pp.269-276
• /
• 2016

Gosan-ri site is known as the early Neolithic cultural heritage, in which an archaic plainware, called as the Gosan-ri-type pottery, was excavated regarding as the first pottery manufactured in Korea. In this study, OSL dating was carried out to five soil layer samples collected in stratigraphic cross-section for evaluating the formation and occupation of the Gosan-ri site. Paleodose of each soil sample was calculated using the single aliquot regenerative dose (SAR) method with preheat of $220^{\circ}C$ and finally determined using maximum age model, considering its deposition process. The OSL age was determined from the ratio of paleodose to annual dose rate. From the resultant OSL ages and the related 14C dates, it was concluded that the Gosan-ri site was formed after 9,000 BC and a variety of cultural feature including the Gosan-ri-type pottery were occupied ranging from the early Neolithic to the middle of 4,000 BC. Finally, the Gosan-ri site was discarded in the middle of 4,000 BC and has been arrived at present through natural deposits.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.1
• /
• pp.49-56
• /
• 2005

Many different kinds of radwastes are discharged from the nuclear power plants, and $^{129}$I is included in these radwastes. Recovery test of $^{129}$I was evaluated for different radwastes(dry active waste, sludge, spent resin and simulated evaporator bottom). Recovery of $^{129}$I for dry active waste by acid leaching with $1.8\%$ NaClO was $74.3\%$$(RSD,\;2.2\%)$ and l291 for spent rein by alkali fusion method with KOH as a flux agent was $87.7\%$$(RSD,\;0.9\%$), respectively. iodide in simulated evaporator bottom containing a high concentration of borate was adsorbed with anion exchange resin at pH 7 phosphate buffer solution. Recovery of $^{129}$I for anion exchange resin was $92.5\%$ and not affected up to 1,200 $\mu$g/mL $H_3BO)3$(as a Boron). Recovery of $^{129}$I for the spent resin from nuclear power plant was $87.2\%$ $(RSD,\;1.2\%)$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.817-822
• /
• 2006

Diamonds have been widely employed as polishing media for precise machining and noble substrates for microelectronics. The recent development of the split sphere press has led to the enhancement of low quality natural diamonds. Synthesized and treated diamonds are sometimes traded deceptively as high quality natural diamonds because it is hard to distinguish among these diamonds with conventional gemological characterization method. Therefore, we need to develop a new identification method that is cheap, fast, and non-destructive. We proposed using a new method of micro-Raman spectroscopy for checking the local HPHT residual stress to distinguish these diamonds from natural ones. We observe unique ~10f compressive and tensile strains at Type I and Type II diamonds after HPHT treatment. Our result implies that our proposed methods may be appropriate fur identification of the treated diamonds with appropriate reference samples.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.599-599
• /
• 2013

최근의 원자간력현미경(AFM)은 생체물질을 대상으로 여러 구조적 형상뿐만 아니라 물리적 특성 측정이 가능하여 바이오분야에 다양이 활용되고 있다. 줄기세포의 신경세포로 분화 인지에 대한 연구와 관련하여 본 연구에서는 AFM의 한 기능인 Force-Distance curve 측정법을 활용하여 신경암세포주라 불리는 SH-SY5Y를 대상으로 분화 전과 후의 세포막의 stiffness 변화를 측정하였다. 세포막의 stiffness값은 시료표면과 맞닿은 AFM 탐침에 계속적으로 수직방향의 힘이 가해질 시 AFM 캔티레버의 구부러짐 정도로 측정된다. SH-SY5Y는 RA (retinoic acid) 처리에 의해 분화유도 되었으며, 생물학적 방법인 western blotting법을 통해 분화여부를 확인하였다. 측정영역은 AFM topography 이미지 상에서 roughness가 가장 낮은 분화 전과 후 SH-SY5Y의 핵 주변영역으로 선정하였다. 선정된 영역 내에 여러 부분의 분화 전후 세포막의 stiffness 값을 측정하여 통계화한 결과, 분화 전과 후 세포막의 stiffness 차이를 확인할 수 있었다. 분화 전 SH-SY5Y 세포막의 stiffness는 0.79445 N/m인 반면, 분화 후 SH-SY5Y 세포막의stiffness는 0.60324 N/m로 확인되었다. 이는 분화 전에 비하여 분화 후 SH-SY5Y 세포막의 stiffness가 약 24.07% 감소된 것으로 판단할 수 있다. 본 연구는 생물학적 복잡한 방법이 아닌 간단한 방법으로 세포의 stiffness의 변화 측정을 통한 세포의 분화를 판별할 수 있는 방법을 개발한 것으로 여러 줄기세포의 특정세포로 분화여부 판단에 활용할 수 있을 것으로 사료된다.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.362-370
• /
• 2009

Quality changes in semi-dried red pepper (SRP) treated with ozone water were observed upon storage (at $-18^{\circ}C$) after freezing at $-10^{\circ}C$, $-20^{\circ}C$, and $-40^{\circ}C$. Drip loss after treatment was greater than in control peppers, but no significant difference was evident between treatments (p<0.05). We observed that differences between samples decreased as storage time increased. Texture after treatment did not change significantly over a 3-month period. The redness (a-value) after treatment was greater than in the control, but no sample showed significant color alteration after the 3-month period. The capsaicinoid content decreasedas storage time increased, and was also affected by the freezing temperature. However, carotenoid content was not influenced by freezing or storage temperature. Ascorbic acid and free sugar contents showed decreases of 47% and 6.5%, respectively, after semi-drying. The results of sensory evaluation indicated no significant difference between samples in terms of color appearance.

• Korean Journal of Microbiology
• /
• v.42 no.4
• /
• pp.306-312
• /
• 2006

Disposal of food garbage in most large cities is very troublesome task. To date, microbiological treatment has been received an attention as a garbage decomposition process. In this study, the inoculation effect of some cellulase, amylase and protease-producing bacteria and photosynthetic bacteria on food garbage treatment was examined. They were added into a treatment reactor specially designed in this study together with food garbage and incubated in various conditions for 15 days and the removals of food garbage and foul smell produced during the treatment were analyzed. Average decomposition percentages of the inoculated food garbage in treatment reactor were 11 and 18.8% under intermittent aeration (once in a day) and continuous aeration conditions (2 L/min), respectively, and these were higher than removal percentages in the corresponding uninoculated reactors,3.4 and 13.8%. Optimal pH and temperature for food garbage decomposition by inoculated bacteria were pH 7.0 and $30^{\circ}C$. Maximal decomposition percentage in the inoculated food garbage was 35% under the optimal condition (pH 7, $30^{\circ}C$, and continuous aeration). The malodor compounds generated from food garbage treatment such as complex foul smell and sulfur compounds were effectively reduced about 84% and 25.5%, respectively, with a biofilter composed of purple nonsulfur bacteria trapped in sponge. This decomposing capability of food garbage by these bacteria can be utilized for the rapid and efficient treatment of food garbage.