• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.77-80
• /
• 2008

해상통신은 인명 안전을 위한 중요 통신으로 국제적으로 보호되어 왔다. 뿐 만 아니라 지구 전역을 커버하기 위해 전송 특성이 좋은 LF/MF/HF대역의 통신시스템 및 위성 시스템이 이용되고 있다. 최근에는 통신 기술의 발달로 육상이동통신 기술을 해상 및 항공에 확대하려는 시도가 꾸준히 진행되고 있다. 통신 기술의 급속한 발전으로 해상 및 항공 통신망은 기존 음성 위주의 통신망에서 멀티미디어를 처리할 수 있는 디지틀망으로의 전환이 시급히 필요하게 되었다. 대부분의 아날로그 시스템은 디지틀 시스템으로 전환되고 있으며 데이터를 이용해서 보다 정확한 정보를 제공해서 해상 안전을 높이고 있으며 기존 개별 장비를 시스템화하여 주파수를 효율적으로 활용하고 사용을 편리하게 할 수 있도록 하고 있다. DSC, AIS 등 이미 많은 디지틀 장비들이 국제 해상 통신에 이용되고 있으며 해상 통신 시스템을 종합화해서 해상안전을 제고하기 위해 IMO를 중심으로 주진 중에 있다. 그러나 연근해 해상 통신 시스템은 SOLAS조약에서 제외되어 있으므로 나라마다 다양하게 개발되고 있다. 특히 연근해에서 중요한 MF/HF/VHF대역 시스템을 각 국이 경쟁하면서 현대화를 추진하고 있으며 ITU-R을 통해서 표준화를 주도하려고 노력하고 있다. 본 고에서는 연근해 핵심 통신망을 구성할 HF/VHF대역 시스템에 대한 기술을 분석하고 기술하였다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.38-45
• /
• 1998

A new set of MQW LD rate equations is proposed that include the interwell carrier transport effect assuming it is dominated by holes. Solving the rate equations, the DC transient response of MQW was obtained and it was shown that uneven carrier concentrations exist due to the interwell carrier transport effect. In addition, it was found that the large number of quantum wells can limit the LD modulation speed and InGaAlAs barriers with smaller valence band offsets can have larger modulation speeds. It is expected that the proposed rate equations can find useful applications in designing the optimal MQW LD structures for high speed applications.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.3
• /
• pp.5-12
• /
• 1982

Through the use of energy ratio of special bandwidths of basic vowels, recognition of Korean basic spoken digit is performed in logical combination with a zero-crossing rate and an energy parameter. In the experiments for recognition of the digits, the speech signal of spoken digits is filtered by a lowpass filter of which the cutoff frequency is 10KHz, and then sampled at 20KHz of sampling rate, In the speech signal processing, we used four FIR digital filters, and the order of filter lengths is 61, 120, 25, 25respectively. The filters are designed by using Remetz exchange algorithm.[13],[14] As a result, the recognition rate of 92% for the three speakers is obstained.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.773-782
• /
• 2016

Recently, Energy Industry is in the face of such sustained Low-Growth, Energy Depletion, Climate Warming and Energy Companies bankruptcy, Various methods have been tried to break through it. In this paper, We propose Business Model of Energy New Industry in Electric Power Market after analyze background of Energy New Industry and Technology Trends. The proposed Business Model introduces Energy of Things(: EoT) Service based Advanced Metering Infrastructure, Energy Storage System(: ESS) for Frequency Regulation, Energy Prosumer using Vehicle and Grid(: VnG) and Smart City.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.88-93
• /
• 2001

This study discusses frequency analysis based on autoregressive (AR) time series model, and process characterization in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The resulting pattern vectors of AR coefficients are then passed to the feature extraction block. Inside the feature extraction block, only those features that are most sensitive to different types of cutting mechanisms are selected. The experimental correlations between the different chip formation mechanisms and AR model coefficients are established.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.11-19
• /
• 2010

In this paper, H-plane filtering-horn antenna operating at millimeter frequency band is proposed with embedded filter and three-layered dielectric lens for frequency selection and maintenance of main beam direction, respectively. The waveguide-typed filter and H-plane sectoral horn antenna are replaced with considerably size-reduced PCB substrate-typed filtering antenna using via fences and several posts. The waveguide-typed filter and H-plane sectoral horn antenna were designed in air-filled waveguide and then combined into size-reduced PCB substrate. For the control of the thickness of dielectric lens, single and multi dielectric lens have been employed. As a result of antenna gain, 8 and 13.5 dBi have been obtained at 41.5 GHz, respectively, from the simulations of single and multi-lens antennas.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.180-185
• /
• 2000

In this paper, we designed 2303.15MHz Sequency synthesizer for the purpose of the phase noise prediction. For the modeling of phase noise Oersted in the designed system through inooducing the noise-modeling method suggested by Lascari we analyzied a variation of phase noise as according as that of offest frequency. Especially, for the third-order system of the PLL among some kinds of phase noise generated from VCO we analyzed the aspect of 1/f-noise appearing troubles in the low frequency band. Since it is difficult to analyze mathematically 1/f-noise in the third-order system of the PLL, introducing the concept of pseudo-damping factor has made an ease of the access of the 1/f-noise variance. we showed a numerical formula of 1/f-noise variance in the third-order system of the PLL which is compared with that of 1/f-noise variance in the second-order system of the PLL

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.761-771
• /
• 1994

This paper focuses on how spectrum information can be represented efficiently in a very low bit rate CELP speech coder. To achieve the goal, an LPC cepstral coefficients VQ scheme representing the spectrum information in a CELP coder is proposed. To represent the spectrum information using LPC cepstrums, three different cepstral distance measures having different spectral meanings in the frequency domain are considered, and their performances are compared and analyzed. The experimental results show that spectrum information in low bit rate CELP coders can be represented very efficiently using the proposed LPC cepstral vector quantization scheme.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.1
• /
• pp.130-138
• /
• 2003

The classical image reconstruction for stripmap-mode Synthetic Aperture Radar is the Range-Doppler algorithm. When the spotlight-mode SAR system was envisioned, Range-Doppler algorithm turned out to fail rapidly in this SAR imaging modality. Thus, what is referred to as Polar format algorithm, which is based on the Plane wave approximation, was introduced for imaging from spotlight-mode SAR raw- data. In this paper, we have studied for the raw data processing schemes in the spotlight-mode Synthetic Aperture Radar. We apply the Wavefront Reconstruction scheme that does not utilize the approximation in spotlight-mode SAR imaging modelity, and compare the performance of target imaging with the Polar format inversion scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.827-832
• /
• 2011

Communication is very important in warfare. Dispatch riders were used in ancient warfare, but communication system is used in modern warfare, as the advancement of communication equipments. In order to weaken enemy military strength, communication jamming signal disrupts enemy communication systems. Tone jamming is one of the common communication jamming techniques. Tone jamming is that several tones are placed in the spectrum for neutralizing the enemy's radio communication receivers. In this paper, we develop multitone jamming signal controlled tone number up to 10 tones and tone interval between tones using DDS(Direct Digital Synthesizer) core and FPGA(Field Programmable Gate Arry) of Xilinx Inc. and show the jamming signal output.