• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.99-106
• /
• 1998

In order to investigate the impact properties of structural materials for LNG tank, instrumented Charpy impact tests were carried out at cryogenic temperatures. $9\%$ Ni steel showed a superior fracture resistance because of less degradation in toughness until 77 K. From the load-deflection curve obtained by an instrumented methods it was found that with the decrease of temperature from 173 K to 77 K, the peak load in the curve increased, but the total absorbed energy decreased. In addition, the energy absorbed during the crack growth was larger than one absorbed in the process of crack initiation. In SUS304L material, the energy absorbed in the process of the crack initiation was relatively large, but the energy absorbed in the process of crack growth was small, the behavior of absorbed energy was well agreed with the observations of the fracture surface which showed a relatively smooth fracture surface. The absorbed Charpy impact energy in the case of A5083 alloy was lower as compared with other steels, and some cracks were observed along the crack propagation direction at the fracture surface of 77 K.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.427-434
• /
• 2005

An experimental investigation was carried out in order to verify the compressive strength, flexural strength, equivalent bending strength, rebound rate of shotcrete according to silicate accelerator, aluminate accelerator, cement mineral accelerator respectively and to especially evaluate the performance of shotcrete using cement mineral accelerator for high quality. The test result of compressive strength was showed that all accelerators were satisfied the required test value for each age, for the requirement of having the $75\%$ or higher compressive strength ratio to plain concretes at 28 days, cement mineral accelerator with $87\%$ compressive strength ratio was only satisfied. In flexural strength test, cement mineral accelerator was satisfied the flexural strength requirement in steel fiber reinforced shotcrete for each age. Aluminate type was conformed to the requirement for 28 days, but not at 1 day, silicate type was failed to satisfy standard requirement. Rebound rate was measured between $11{\~}19\%$ and cement mineral accelerator was showed comparatively lower rebound rate. Based on the test results, cement mineral accelerator exhibited excellent strength improvement and lower rebound rate compared to the conventional accelerator, its result is showed the possibility of making high performance shotcrete.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.769-776
• /
• 2006

Recently, owing to the development of industry and the improvement of building techniques, concrete structures are becoming larger and higher. In hardening of these large connote structures, the heat of hydration gives rise to considerable thermal stress depending on the size and environmental condition of concrete, which might cause thermal cracking. Especially, the crack may cause severe damage to the safety and the durability of concrete structure. This study investigates the thermal properties of concrete according to several binder conditions, such as OPC, Belite rich cement(BRC), slag cement(SC), blast furnace slag(B) added cement fly ash(F) added cement and blast-furnace-slag and fly ash added cement. As a result of this study, the properly of concrete is most better BRC than others, and fly ash(25%) added cement and BFS(35%)-fly ash(15%) added cement gets superior effect in the control of heat hydration. But synthetically considered properties of concrete, workablity, strength heat hydration, etc, it is more effective to use mineral admixture. Especially, to be used Blast Furnace slag is more effective.

• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.295-304
• /
• 2013

Ultra-High Performance Concrete (UHPC) has recently been one of the most active research fields in Korea as well as in foreign countries, because it can contribute to a longer life and economic efficiency of structures. Although precast-type UHPC fabricated in a factory is preferable in terms of quality control and reduction of construction period, there exist, even in the precast structure, some parts that need to be cast in-place such as the joints between precast segments. In the cast-in-place UHPC, however, it is probable that an optimum curing condition can hardly be realized in contrast to the factory production. In this study, therefore, the trend of compressive strength development of UHPC was experimentally investigated by assuming various inferior curing conditions that may be anticipated at a construction site. Concrete specimens were fabricated and cured under different conditions with the variables such as curing temperature, delay time before the initiation of curing, duration of curing time and moisture condition. The strengths were compared with those of the specimens cured by standard high temperature steam. Through the analysis of the test results, some minimum requirements for curing have been proposed that are required when the UHPC is cast in-place. It is expected, through this study, that practical use of UHPC in construction sites can be increased.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.721-729
• /
• 2008

The purpose of this study is to investigate the engineering properties of concrete for the early strength development. As a result of reviewing it by establishing each experimental factor and level, the cement had more excellent quality performance in CHC and HESPC than OPC. This study has shown that the PC series admixture was more excellent in side of elapsed time (aging) and early strength development than PNS series admixture. In addition, there was much difference according to the curing temperature, but the early strength development showed the considerable vulnerability in curing temperature below $12^{\circ}C$. To satisfy the strength requirements of 5 MPa/18 hr this study has shown that it needed the curing temperature over $17^{\circ}C$ to the minimum in OPC, over $14^{\circ}C$ in CHC, and over $11^{\circ}C$ in HESPC. On the other hand, as to the strength properties according to W/C, the less W/C was, the more strength development was excellent. If this study is to be used in construction filed on a basis of this result, this researcher is considered as possible of the economic execution of construction by advancing the early strength and by the reduction of construction cost according to shortening construction duration.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.4
• /
• pp.651-668
• /
• 2017

For initial stability of the tunnel, the primary support, Shotcrete and rockbolt shall be placed in the most appropriate time. This is because the role of such support plays a vital role in long-term and short-term tunnel stability. In this study, the rock bolt is an important supporting system that receives the external pressure generated by the stress relaxation during tunnel excavation as axial force and transmits it to the shotcrete on the tunnel excavation surface. Until now, most of the materials of rock bolts have been used in the field, but there have been many problems such as uncertain quality of Chinese materials entering the market, poor packing due to falling down of rock bolts when filled with mortar, and corrosion due to water. Therefore, in this study, we have developed a high strength steel pipe rock bolt using Autobeam material to solve and improve various problems of existing rock bolts. In order to evaluate the performance of the developed bolt, field tests were carried out and the existing mortar filler in order to improve the performance of the rock bolt, the design and construction criteria were studied and the results were included in this paper.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.3 s.19
• /
• pp.79-87
• /
• 2004

Building industry clients are suggested to clarify requirements and needs properly at the pre-project stage. According to these they can develop options to meet their needs with considering their resources and business case. At this stage, they make decisions while professionals in the industry are not involving. This process is called client briefing at the pre-project stage. However, client briefing is not a discrete process only conducted at this stage; various clients briefings should be performed over a project lift cycle. The client briefing at the pre-project stage is more important than others as the value for the clients is clarified at this stage - they may not be satisfied for the project results even when the project is finished on time within budget if the value itself is incorrectly defined. Given that the client briefing is important as stated, this paper aims to review theory on client briefing focusing those at the pre-project stage. As a part of research, a prototype workshop for client briefing is held and findings from it are summarized. Finally, suggestions for conducting client briefing in Korea are presented in terms of directions of relevant research, systems in the industry and points that clients or client briefing consultants should consider.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.396-401
• /
• 2006

A "Housing Performance Grade Indication System" that is bound to present the grade in housing designs has been executed since January 2006 in order to build sustainable housing and supply high quality housing. Thus, users are able to select their housing based on certain comparisons in housing performances, and providers can be exactly evaluated using precise standards according to the execution of this system. The objective of this study is to propose a guideline in designs according to the grade of housing as a reasonable decision making tool in order to obtain a high grade in housing performance grades under the execution of the "Housing Performance Grade Indication System". In order to perform this goal, this study examines the performance evaluation item and evaluation guidelines in the "Housing Performance Grade Indication System" and analyzes relative systems and guidelines executed in the present time to investigate certain relativeness for this system. The housing performance evaluation item can be classified four different categories according to the characteristics of evaluation guidelines. Then, the system of a design guideline is configured to propose a reasonable design guideline according to the grade of housing performances. It is evident that the design guideline proposed in this paper will support the reasonable decision making to obtain a high grade in housing performances for the designer and constructor in the process of a housing project.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.533-544
• /
• 2015

Unlike the concrete structure built on land, that exposed to the marine environment is greatly degraded in durability due to the exposure to not only the physical action caused by sea wind, tide, and wave, but also the harsh conditions, including the chemical erosion and freeze-thaw which result from $SO_4{^{2-}}$, $Cl^-$ and $Mg^{2+}$ ions in seawater. In the process of the large scaled construction of submerged concrete structures, of course environmental hazardous substance, such as alkaline (pH) and heavy metals, may be leached. Thus, this issue needs to be adequately reviewed and studied. Therefore, this study attempted to develop a CSA (Calcium Sulfo Aluminate) activator using electric arc furnace reducing slags, as well as the eco-friendly concrete for artificial reefs using electric arc furnace oxidizing slag as aggregate for concrete. The strength properties of the eco-friendly concrete exposed to the marine environment were lower than those of the normal concrete by curing 28 days. This suggest that additional studies are needed to improve the early strength of the eco-friendly concrete. With respect to seawater resistance of the eco-friendly concrete, the average strength loss against 1 year of curing days reached 8-9%. the eco-friendly concrete using high volume of ground granulated blast furnace slags and high specific gravity of electronic arc furnace oxidizing slag demonstrated the sufficient usability as a freeze-thaw resistant material. With respect to heavy metal leaching properties of the eco-friendly concrete, heavy metal substances were immobilized by chemical bonding in the curing process through the hydration of concrete. Thus, heavy metal substances were neither identified at or below environmental hazard criteria nor detected, suggesting that the eco-friendly concrete is safe in terms of leaching of hazardous substances.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.76-81
• /
• 2006

창녕군 증산리 지역은 신규 취수원 확보 일환으로 강변여과 방식 취수 가능성이 한국수자원공사에 의해서 평가되고 있는 지역이다. 강변여과 방식 취수의 타당성 평가를 위해 현장 지질조사, 시추조사, 전기 비저항 탐사 및 고해상도 탄성파 탐사를 수행하였다. 또한 대상 연구지역에서의 개략적 취수 가능량 산정을 위해 모델링 평가가 수행되었으며, 개별 정호에 대한 양수량 산정을 위해 시험 정호를 설치하였다. 현장 시추 조사와 시료에 대한 입도 분석 결과, 연구 지역의 충적층 두께는 35m 전후이며, 주 대수층 구간은 지표하 $25{\sim}35m$인 것으로 추정되었다. 또한 주 대수층 구간의 수리전도도는 $10^{-2}cm/sec$ 이상으로 주로 모래섞인 자갈층으로 구성되어있는 것으로 평가되었다. 또한 전기비저항 조사 결과는 부분적으로 매우 낮은 비저항 분포 지층을 보여주고 있으며, 이는 주로 실트 및 점토로 된 지층이 부분적으로 퇴적되어 있음을 지시하며, 고해상도 탄성파 탐사 결과는 전반적으로 지하수위는 지표하부 5m 전후에 분포하고, 충적층의 하부 경계는 35 내지 45m인 것으로 해석되었다. 지하수 모델링을 통해, 취수 목표량인 180,000톤/일은 주대수층까지의 지하수위 강하 없이 확보 가능할 것으로 평가되었다. 또한 개별 정호의 산출 특성을 평가하기 위해 시험 정호를 설치하여, 실제 2,700톤/일 예비 양수 시험을 수행하였다. 예비 양수 시험 결과, 양수정에서의 수위 강하는 개략 10m, 양수정관측정에서는 약 0.3m의 수위강하만이 관찰되었으며, 양수 영향권이 수 십 m를 넘지 않을 것으로 판단되었다.서의 S97과 JBR의 세포감염 억제율은 3.85%와 3.63%로 나타났다. $textsc{k}$-casein, CU는 로타바이러스 S97과 JBR에 대해 농도 2000UM에서 97%이상의 억제효과를 나타냈으며, sialic acid는 억제효과가 거의 없었다. K-casein, GMP는 송아지뿐만 아니라 유아의 로타바이러스에 의한 설사를 억제할 수 있을 것으로 기대된다.을 향상하기 위해서는 이러한 부위에 대한 미생물 오염을 낮출 수 있는 세심한 현장 품질관리가 필요하다.en and adolescents, analysed by country, age group and gender. The paper discusses the places young consumers can turn to in trying to fulfil their growing consumer needs. It also examines how much money is at their disposal. It then concludes by considering the influence of "financial socialization" on how young people deal with money.nsumption visions based on the various perspectives, consumers are influenced in the apparel buying decision-making. Many subjects reported experiencing positive affect when imagining positive outcomes of produc